MCC
TM
Micro Commercial Components
Features
x
x
x
x
x
•
•
SMBJ5338B
THRU
SMBJ5388B
omponents
20736 Marilla Street Chatsworth
!"#
$
% !"#
Low Profile Package for Surface Mountiong(Flat Handling
Surface for Accurate Placement)
Zener Voltage 5.1V to 200V
High Surge Current Capability
For Available Tolerances-see Note 1
Available on Tape and Reel (see E1A std RS-481)
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Halogen free available upon request by adding suffix "-HF"
5 Watt
Surface Mount Silicon
Zener Diode
5.1 to 200 Volts
DO-214AA
(SMB) (Lead Frame)
Mechanical Data
H
x Standard JEDEC Outlines as Shown
x Marking: See page 2
x Maximum Temperature for Soldering: 260к for 10 Seconds
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Sensitivity Level 1
J
Electrical Characteristics @ 25qC Unless Otherwise Specified
Forward Voltage at
1.0A Current
Steady State Power
Dissipation
Operating and Storage
Temperatures
Thermal Resistance
A
VF
1.2Volts
P(AV)
5Watts See Note 2
TJ, TSTG
-55к to +150к
R șJL
15к/W
E
R șJA
90к/W
Note: 1.High Tempertaure Solder Exemptions Applied,see EU Directive Annex 7.
2. Lead temperature at 75к = TL at mounting plane. Derate linearly
above 75к to zero power at 150 к
3. Ambient temperature at 15к = TA at mounting plane. Derate linearly
above 15к to zero power at 150 к
C
D
B
G
DIMENSIONS
DIM
A
B
C
D
E
G
H
J
INCHES
MIN
.075
.077
.002
----.030
.200
.160
.130
MM
MIN
1.91
1.96
.05
----.76
5.08
4.06
3.30
MAX
.095
.083
.008
.02
.060
.220
.187
.155
MAX
2.41
2.10
.20
.51
1.52
5.59
4.75
3.94
NOTE
SUGGESTED SOLDER
PAD LAYOUT
0.090"
0.085”
0.070”
Revision: J
www.mccsemi.com
1 of 5
2014/09/09
MCC
SMBJ5338B thru SMBJ5388B
TM
Micro Commercial Components
ELECTRICAL CHARACTERISTICS @25ć
MAXIMUM
SURGE
CURRENT
IZSM
MAXIMUM
VOLTAGE
REGULATION
OHMS
A
VOLTS
400
14.4
0.39
TEST
CURRENT
IZ
MAXIMUM
DYNAMIC
IMPEDANCE
ZZT
MAXIMUM
REVERSE
CURRENT
IR
VOLTS
mA
OHMS
SMBJ5338B
5.1
240
1.5
µA
1
SMBJ5339B
5.6
220
1
1
2
865
400
13.4
0.25
SMBJ5340B
6
200
1
1
3
790
300
12.7
0.19
SMBJ5341B
6.2
200
1
1
3
765
200
12.4
0.1
SMBJ5342B
6.8
175
1
10
5.2
700
200
11.5
0.15
SMBJ5343B
7.5
175
1.5
10
5.7
630
200
10.7
0.15
SMBJ5344B
8.2
150
1.5
10
6.2
580
200
10
0.2
SMBJ5345B
8.7
150
2
10
6.6
545
200
9.5
0.2
SMBJ5346B
9.1
150
2
7.5
6.9
520
150
9.2
0.22
SMBJ5347B
10
125
2
5
7.6
475
125
8.6
0.22
SMBJ5348B
11
125
2.5
5
8.4
430
125
8
0.25
SMBJ5349B
12
100
2.5
2
9.1
395
125
7.5
0.25
SMBJ5350B
13
100
2.5
1
9.9
365
100
7
0.25
SMBJ5351B
14
100
2.5
1
10.6
340
75
6.7
0.25
SMBJ5352B
15
75
2.5
1
11.5
315
75
6.3
0.25
SMBJ5353B
16
75
2.5
1
12.2
295
75
6
0.3
SMBJ5354B
17
70
2.5
0.5
12.9
280
75
5.8
0.35
SMBJ5355B
18
65
2.5
0.5
13.7
264
75
5.5
0.4
SMBJ5356B
19
65
3
0.5
14.4
250
75
5.3
0.4
SMBJ5357B
20
65
3
0.5
15.2
237
75
5.1
0.4
SMBJ5358B
22
50
3.5
0.5
16.7
216
75
4.7
0.45
SMBJ5359B
24
50
3.5
0.5
18.2
198
100
4.4
0.55
SMBJ5360B
25
50
4
0.5
19
190
110
4.3
0.55
SMBJ5361B
27
50
5
0.5
20.6
176
120
4.1
0.6
SMBJ5362B
28
50
6
0.5
21.2
170
130
3.9
0.6
SMBJ5363B
30
40
8
0.5
22.8
158
140
3.7
0.6
SMBJ5364B
33
40
10
0.5
25.1
144
150
3.5
0.6
SMBJ5365B
36
30
11
0.5
27.4
132
160
3.3
0.65
SMBJ5366B
39
30
14
0.5
29.7
122
170
3.1
0.65
SMBJ5367B
43
30
20
0.5
32.7
110
190
2.8
0.7
SMBJ5368B
47
25
25
0.5
35.8
100
210
2.7
0.8
SMBJ5369B
51
25
27
0.5
38.8
93
230
2.5
0.9
SMBJ5370B
56
20
35
0.5
42.6
86
280
2.3
1
SMBJ5371B
60
20
40
0.5
45.5
79
350
2.2
1.2
SMBJ5372B
62
20
42
0.5
47.1
76
400
2.1
1.35
SMBJ5373B
68
20
44
0.5
51.7
70
500
2
1.5
SMBJ5374B
75
20
45
0.5
56
63
620
1.9
1.6
SMBJ5375B
82
15
65
0.5
62.2
58
720
1.8
1.8
SMBJ5376B
87
15
75
0.5
66
54.5
760
1.7
2
SMBJ5377B
91
15
75
0.5
69.2
52.5
760
1.6
2.2
SMBJ5378B
100
12
90
0.5
76
47.5
800
1.5
2.3
SMBJ5379B
110
12
125
0.5
83.6
43
1000
1.4
2.5
SMBJ5380B
120
10
170
0.5
91.2
39.5
1150
1.3
2.5
SMBJ5381B
130
10
190
0.5
98.8
36.6
1250
1.2
2.5
SMBJ5382B
140
8.0
230
0.5
106
34
1500
1.2
2.5
SMBJ5383B
150
8.0
330
0.5
114
31.6
1500
1.1
3
SMBJ5384B
160
8.0
350
0.5
122
29.4
1650
1.1
3
SMBJ5385B
170
8.0
380
0.5
129
28
1750
1.0
3
SMBJ5386B
180
5.0
430
0.5
137
26.4
1750
1.0
4
SMBJ5387B
190
5.0
450
0.5
144
25
1850
0.9
5
SMBJ5388B
200
5.0
480
0.5
152
23.6
1850
0.9
5
MCC PART
NUMBER
Revision: J
REGULATOR
VOLTAGE
VZ
MAXIMUM
REGULATOR
CURRENT
IZM
MAXIMUM
DYNAMIC KNEE
IMPEDANCE
[email protected]
VOLTS
mA
1
930
TEST
VOLTAGE
VR
www.mccsemi.com
2 of 5
2014/09/09
MCC
SMBJ5338B thru SMBJ5388B
TM
Micro Commercial Components
Marking Code Info.
MCC
369B
Cathode Band
Logo
Type No.
For Example: 339B for SMBJ5339B
369B for SMBJ5369B
Note 1
Devices listed have a ± 5% tolerance on nominal V Z.
_
Suffix C denotes a +2%
Note 2
Nominal Zener Voltage (V Z) is tested with a 40 +/-10
milliseconds pulse current at 25°C to avoid self-heat affection.
Note 5
The Maximum Zener Current (I ZM) shown is for ± 5%
tolerance devices. I ZM for ± 10% and ± 20% devices
can be calculated using the formula:
IZM =
P
V ZM
Where “V ZM” is V Z at the high end of the voltage
tolerance specified and “P” is the rated power of the
device.
Note 3
Note 4
The Zener impedance (Z ZT or ZZK is derived from the 60
HZ ac voltage, which results when an ac current having
a rms value equal to 10% of the dc zener current (I ZT or
IZK) is superimposed on I ZT or IZK respectively.
Note 6
The Surge Current (I ZM) is specified as the maximum
peak of a nonrecurring sine wave of 8.3 milliseconds
duration.
Note 7
Voltage Regulation ( ∆VZ) is the difference between the
voltage measured at 10% and 50% I ZM).
The Maximum Reverse (leakage) Current is specified
for devices with ± 20% and ± 10% voltage tolerances
on nominal V Z in another column.
Revision: J
www.mccsemi.com
3 of 5
2014/09/09
MCC
TM
RATING AND CHARACTERISTICS CURVES
Micro Commercial Components
PD, MAXIUMU POWER DISSIPATION (WATTS)
SMBJ5338B THRU SMBJ5388B
7
5
θVZ , TEMPERATURE COEFFICIENT
(mV/°C) @ I ZT
6
TL
4
3
2
1
TA
0
0
20
40
60
80
100
300
200
100
RANGE
50
30
20
10
5
0
20 40 60
80 100 120 140 160 180 200 220
VZ, ZENER VOLTAGE @IZT (VOLTS)
120
TL,LEAD TEMPERATURE
TA, AMBIENT TEMPERATURE
Fig. 1-POWER TEMPERATURE DERATING CURVE
Fig. 2-TEMPERATURE COEFFICIENT-RANGE FOR UNITS
6 TO 51 VOLTS
T = 25
IZ, ZENER CURRENT (mA)
IZ, ZENER CURRENT (mA)
1000
TC = 25
1000
100
10
1
0.1
1
2
3
4
5
6
7
8
9
T = 25
100
10
1
10
0.1
VZ, ZENER VOLTAGE (VOLTS)
10
20
30
40
50
60
70
80
VZ, ZENER VOLTAGE (VOLTS)
Fig. 3-ZENER VOLTAGE VERSUS ZENER CURRENT
VZ = 6.8 THRU 10 VOLTS
Revision: J
Fig. 4-ZENER VOLTAGE VERSUS ZENER CURRENT
VZ = 11 THRU 51 VOLTS
www.mccsemi.com
4 of 5
2014/09/09
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 3Kpcs/Reel
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Revision: J
www.mccsemi.com
5 of 5
2014/09/09