SN54ALS1010A, SN74ALS1010A TRIPLE 3-INPUT POSITIVE-NAND BUFFERS SDAS075A – D2661, APRIL 1982 – REVISED MAY 1986 • • • Buffer Version of ’ALS10A Package Options include Plastic Small Outline DIPs and Ceramic Chip Carriers in Addition to the Standard 300-mil Plastic and Ceramic DIPs. Dependable Texas Instruments Quality and Reliability SN54ALS1010A . . . J PACKAGE SN74ALS1010A . . . D OR N PACKAGE (TOP VIEW) 1A 1B 2A 2B 2C 2Y GND description The SN54ALS1010A is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74ALS1010A is characterized for operation from 0°C to 70°C. FUNCTION TABLE (each gate) H H H OUTPUT Y L X X H L X H X X L H 1B 1C 2A 2B & 12 13 5 2C 9 3A 10 3B 11 3C 10 6 9 7 8 2A NC 2B NC 2C 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1Y NC 3C NC 3B 1Y 1A 1B 1C 1Y 2Y 2Y 2A 2B 2C 3A 3B 3C 3Y 3 4 11 5 logic diagram (positive logic) 1 2 12 4 NC – No internal connection logic symbol † 1A 13 3 SN54ALS1010A . . . FK PACKAGE (TOP VIEW) L X 2 VCC 1C 1Y 3C 3B 3A 3Y 2Y GND NC 3Y 3A INPUTS A B C 14 1B 1A NC V CC 1C These devices contain three independent 3-input NAND buffers. They perform the Boolean functions Y = A⋅B⋅C or Y = A+B+C in positive logic. 1 6 8 3Y † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for D, J, and N packages. Copyright 1986, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54ALS1010A, SN74ALS1010A TRIPLE 3-INPUT POSITIVE-NAND BUFFERS SDAS075A – D2661, APRIL 1982 – REVISED MAY 1986 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Operating free-air temperature range: SN54ALS1010A . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74ALS1010A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C recommended operating conditions SN54ALS1010A SN74ALS1010A MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IOH Low-level input voltage 0.7 0.8 High-level output current –1 – 2.6 mA IOL TA Low-level output current 24 mA 70 °C High-level input voltage 2 2 V 12 Operating free-air temperature – 55 125 V 0 V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = – 18 mA IOH = – 0.4 mA VCC = 4.5 V, VCC = 4.5 V, IOH = – 1 mA IOH = – 2.6 mA VOL VCC = 4.5 V, VCC = 4.5 V, IOL = 12 mA IOL = 24 mA II IIH VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V IIL IO‡ VCC = 5.5 V, VCC = 5.5 V, VI = 0.4 V VO = 2.25 V ICCH ICCL VCC = 5.5 V, VCC = 5.5 V, VI = 0 VI = 4.5 V VOH SN54ALS1010A TYP† MAX TEST CONDITIONS MIN SN74ALS1010A TYP† MAX MIN – 1.5 VCC – 2 2.4 – 1.5 UNIT V VCC – 2 3.3 V 2.4 0.25 – 30 3.3 0.4 0.25 0.4 0.35 0.5 V 0.1 0.1 20 20 µA – 0.1 – 0.1 mA – 112 – 30 mA –112 mA 0.65 1.2 0.65 1.2 mA 3.6 5.8 3.6 5.8 mA † All typical values are at VCC = 5 V, TA = 25°C. ‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. switching characteristics (see Note 1) PARAMETER VCC = 5 V, CL = 50 pF, VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, FROM TO RL= 500 Ω, (INPUT) (OUTPUT) TA = 25°C ’ALS1010A TYP tPLH tPHL A or B Y MAX MIN MAX 5 2 12 2 8 5 2 12 2 8 NOTE 1: Load circuit and voltage waveforms are shown in Section 1. 2 POST OFFICE BOX 655303 TA = MIN to MAX SN54ALS1010A SN74ALS1010A • DALLAS, TEXAS 75265 MIN UNIT ns IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated