AXICOM Telecom-, Signal and RF Relays FX2 Relay 108-98003 • Apr. 10 Rev. G • ECOC: JM10 AXICOM 108-98003 Rev. G Telecom-, Signal and RF Relays FX2 Relay Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this datasheet are for reference purpose only and are subject to change without notice. Specifications are subject to change without notice. Index UL 508 File No. E 111441 UL 60950 IEC/EN60950 IEC Ref. Cert. No. CH-3269 Dimensions Coil Operating Range Coil Data and Ordering Information Contact Data Insulation General Data Packing All specifications subject to change. Consult Tyco Electronics for latest specifications. 4 5 6 7 8 8 9 2 of 11 AXICOM 108-98003 Rev. G Telecom-, Signal and RF Relays FX2 Relay 2 pole telecom / signal relay Through Hole Type (THT) Polarized, latching or non-latching 1 coil Relay types: sensitive non lachting version with 1 coil high sensitive non latching version with 1 coil, latching with 1 coil ROHS compliant (Directive 2002/95/EC) as per product date code 0342 / halogen free. Features • • • • • • • • • • Telecom/signal relay (dry circuit, test access, ringing) Slim line 15 x 7.3 mm, 0.590 x 0.287 inch Switching current 2 A 2 changeover contacts (2 form C / DPDT) Bifurcated contacts High sensitivity results in low nominal power consumption 80 mW for high sensitive, 140 mW for sensitive version High dielectric characteristic ≤ 1800 Vrms also between open contact High surge capability (1.2 / 50 µs and 10 / 700 µs) meets Telcordia GR 1089 and FCC Part 68 ≤ 2500 V between open contacts ≤ 3500 V between coil and contacts High mechanical shock up to 300 G functional up to 1500 G survival Hermetically sealed (RT V) Typical applications • Communications equipment linecard application - analog, ISDN, xDSL, PABX Voice over IP • Office and business equipment • Measurement and control equipment • Consumer electronics Set top boxes, HiFi • Medical equipment Insulation category Supplementary insulation according Working voltage Mains supply voltage Repetitive peak voltage Pollution degree Flammability classification Maximum operating temperature All specifications subject to change. Consult Tyco Electronics for latest specifications. IEC / EN 60950 ≤ 300 Vrms ≤ 250 Vrms 2500 V Internal: 1 External:2 V-0 85 °C 3 of 11 AXICOM 108-98003 Rev. G Telecom-, Signal and RF Relays FX2 Relay Dimensions Dimensions in mm THT mm inch L W H 14.95 ± 0.05 7.30 ± 0.05 10.70 ± 0.05 0.588 ± 0.002 0.287 ± 0.002 0.421 ± 0.002 T T1 T2 Tw S 3.30 ± 0.30 N/A 5.08 ± 0.15 0.50 0.30 ± 0.05 0.129 ± 0.012 N/A 0.199 ± 0.006 0.019 0.012 ± 0.002 THT Version Mounting hole layout View onto the component side of the PCB (top view) Terminal assignment Relay – top view Non-latching type Latching type, 1 coil not energized condition reset condition Contacts in reset position. Contact position might change during transportation and must be reset before use. All specifications subject to change. Consult Tyco Electronics for latest specifications. 4 of 11 AXICOM 108-98003 Rev. G Telecom-, Signal and RF Relays FX2 Relay Coil Operating Range 3.4 3.2 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 3 2.8 2.6 Coil Voltage [U/Unom] Unom = Umax. = Uop. min. = Urel. min. = 80 mW 140 mW 200 mW 2.4 2.2 2 1.8 Nominal coil voltage Upper limit of the operative range of the coil voltage (limiting voltage) Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Lower limit of the operative range of the coil voltage (reliable release voltage) 1.6 1.4 1.2 Unom. nominal coil voltage 1 0.8 Uop. min. Urel. min. 0.6 0.4 0.2 0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature [°C] 260 mW 300 mW 2.6 2.4 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.2 Coil Voltage [U/Unom] 2.0 1.8 1.6 1.4 1.2 1.0 Unom. nominal coil voltage 0.8 0.6 Uop. min. Urel. min. 0.4 0.2 0.0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature [°C] 100 mW Latching 4.4 4.2 4 3.8 3.6 3.4 Coil Voltage [U/Unom] 3.2 3 2.8 2.6 2.4 2.2 2 1.8 1.6 1.4 1.2 1 0.8 Umax. - 100 % coil duty at 0 A Umax. - 5 % coil duty at 2 x 2 A Umax. - 5 % coil duty at 2 x 1 A Umax. - 5 % coil duty at 0 A Unom. nominal coil voltage 0.6 0.4 Uset min. 0.2 0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature [°C] 90 100 110 120 130 140 All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 11 AXICOM 108-98003 Rev. G Telecom-, Signal and RF Relays FX2 Relay Coil Data (values at 23 °C) Nominal voltage Unom Operate/set voltage range Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance Relay code Tyco part number Minimum voltage Umin Maximum voltage Umax Vdc Vdc Vdc mW Ω / ± 10 % 6.30 8.40 9.40 10.50 12.60 18.90 25.20 42.20 68.90 0.30 0.40 0.45 0.50 0.60 0.90 1.20 2.40 4.80 140 140 140 140 140 140 140 200 300 64 114 145 178 257 574 1028 2880 7680 D 3206 D 3207 D 3204 D 3209 D 3205 D 3210 D 3202 D 3212 D 3213 1462034-6 1462034-8 1462034-2 1462034-9 1462034-5 1-1462034-3 1462034-1 1-1462034-4 1-1462034-5 8.30 11.10 12.50 13.90 16.70 33.40 50.40 70.00 0.30 0.45 0.50 0.60 0.90 1.20 2.40 4.80 80 80 80 80 80 80 140 260 113 353 313 450 1013 1800 4114 8882 D 3221 D 3222 D 3223 D 3224 D 3225 D 3226 D 3227 D 3228 1-1462034-9 2-1462034-0 2-1462034-1 2-1462034-2 2-1462034-3 2-1462034-4 2-1462034-5 2-1462034-6 7.50 11.20 12.40 14.90 22.40 29.80 48.70 -2.25 -3.38 -3.75 -4.50 -6.75 -9.00 -18.00 100 100 100 100 100 100 150 90 203 250 360 810 1440 3840 D 3241 D 3242 D 3243 D 3244 D 3245 D 3246 D 3247 2-1462034-8 2-1462034-9 3-1462034-0 3-1462034-1 3-1462034-2 3-1462034-3 3-1462034-4 6.30 0.30 200 45 D 3291 6-1462034-6 Vdc Standard Version Non-Latching, 1 coil 3 4 4.5 5 6 9 12 24 48 2.10 2.80 3.15 3.50 4.20 6.30 8.40 16.80 33.60 High Sensitive Version Non-Latching, 1 coil 3 4.5 5 6 9 12 24 48 2.25 3.38 3.75 4.50 6.75 9.00 18.00 36.00 Standard Version Latching, 1 coil 3 4.5 5 6 9 12 24 2.25 3.38 3.75 4.50 6.75 9.00 18.00 High-Dielectric Version Non-Latching, 1 coil 3 2.25 Further coil versions are available on request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 6 of 11 AXICOM 108-98003 Rev. G Telecom-, Signal and RF Relays FX2 Relay Contact Data Number of contacts and type 2 changeover contacts Contact assembly Bifurcated contacts Contact material Palladium-ruthenium - gold covered Limiting continuous current at max. ambient temperature 2A Maximum switching current 2A Maximum swichting voltage 220 Vdc 250 Vac Maximum switching capacity 60 W, 62.5 VA Thermoelectric potential < 10 µV Minimum switching voltage 100 µV Initial contact resistance / measuring condition: 10 mA / 20 mV < 70 mΩ Electrical endurance CC0 contact category 0 (≤ 30 mV / ≤ 10 mA) at cable load open end at 24 V / 1.25 A at 125 V / 0.24 A at 30 V / 2 A min. 2.5 x 106 operations min. 2.0 x 106 operations min. 5 x 105 operations min. 5 x 105 operations min. 5 x 105 operations typ. 108 operations Mechanical endurance UL contact ratings 220 Vdc / 0.24 A - 60 W 125 Vdc / 0.24 A - 30 W 250 Vac / 0.25 A - 62.5 VA 125 Vac / 0.5 A - 62.5 VA 30 Vdc / 2 A - 60 W DC Voltage [Vdc] Max. DC Load Breaking Capacity resistive load DC current [A] All specifications subject to change. Consult Tyco Electronics for latest specifications. 7 of 11 AXICOM 108-98003 Rev. G Telecom-, Signal and RF Relays FX2 Relay Insulation Standard Version High Dielectric Version > 109 Ω Insulation resistance at 500 Vdc Dielectric test voltage (1 min) between coil and contacts between adjacent contact sets between open contacts Surge voltage resistance according to Telcordia GR 1089 (2 / 10 µs) between coil and contacts between adjacent contact sets between open contacts according to FCC 68 (10 / 160 µs) and IEC (10 / 700 µs) between coil and contacts between adjacent contact sets between open contacts 1800 Vrms 1800 Vrms 1800 Vrms 4000 Vrms 1500 Vrms 1500 Vrms 3500 V 2500 V 2500 V 6000 V 2000 V 2000 V 3500 V 2500 V 2500 V 6000 V 2000 V 2000 V High Frequency Data Capacitance between coil and contacts between adjacent contact sets between open contacts max. 4 pF max. 2 pF max. 2 pF RF Characteristics Isolation at 100 MHz / 900 MHz Insertion loss at 100 MHz / 900 MHz V.S.W.R. at 100 MHz / 900 MHz - 34.0 dB / - 15.1 dB - 0.03 dB / - 0.60 dB 1.07 / 1.45 General Data Operate time at Unom typ. / max. 3 ms / 4 ms Reset time (latching) atUnom , typ. / max. 3 ms / 4 ms Duration of set / reset pulse (latching) min. 20ms* Release time without diode in parallel (non-latching), typ. / max. 1 ms / 3 ms Release time with diode in parallel (non-latching), typ. / max. 3 ms / 4 ms Bounce time at closing contact, typ. / max. 1 ms / 5 ms Maximum switching rate without load 50 operations/s Ambient temperature -55 °C ... +85 °C Thermal resistance < 165 K/W Maximum permissible coil temperature 125 °C Vibration resistance (function) 20 G 10 to 500 Hz Shock resistance, half sinus, 11 ms 50 G (function) 1500 G (damage) Degree of protection / Environmental protection immersion cleanable, IP 67 / RT V Needle flame test application time 20 s, no burning Mounting position any Processing information Ultrasonic cleaning is not recommended Weight (mass) max. 2.5 g Terminal surface SnCu 0.7 Resistance to soldering heat 265 °C / 10 s * Duration may be shorter depending on pulse shape, voltage applied and ambiente temperature All data refers to 23 °C unless otherwise specified. All specifications subject to change. Consult Tyco Electronics for latest specifications. 8 of 11 AXICOM Telecom-, Signal and RF Relays 108-98003 Rev. G FX2 Relay Packing Dimensions in mm Stick dimension Tube for THT version 50 relays per stick 1‘000 relays per box All specifications subject to change. Consult Tyco Electronics for latest specifications. 9 of 11 AXICOM 108-98003 Rev. G Telecom-, Signal and RF Relays FX2 Relay IM Relays D2n Relays 4th generation slim line – low profile polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G relay on the market. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height. 2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 20 x10 mm board space and 11 mm height. P2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. FX2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/ IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. FT2 / FU2 Relays P1 Relays Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version. W11 Relays Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. Reed Relays High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version. Cradle Relays 3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. FP2 Relays Other Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height. We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 50-plus years old now, such as Card Relay SN (V23030 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional. MT2 2nd generation non polarized, non latching 2 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 150/200/300/400 and 550 mW. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 20 x 10 mm board space and 11 mm height. High Frequency Relays HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics in a small package. All HF series relays are suitable for SMD soldering processes. Available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 … 24 V, a coil power consumption of 140 mW or 70 mW (single coil latching types). HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm. 50 W hot switching and 50 W RF power carry capability. Dimensions 14.6 x 7.3 x 10.3 mm. HF3S: High performance, high power RF relay suitable up to 3 GHz, 50 W hot switching and 150 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. HF6: High performance, high power RF relay suitable up to 6 GHz, 50 W hot switching and 50 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. All specifications subject to change. Consult Tyco Electronics for latest specifications. 10 of 11 Tyco Electronics Logistics AG Werk Axicom Au Seestrasse 295 CH-8804 Au-Wädenswil / Switzerland Phone +41 44 782 91 11 Fax +41 44 782 90 00 E-mail: [email protected] Tyco Electronics Paulsternstrasse 32 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: [email protected] Tyco Electronics EC Trutnov s.r.o. Komenského 821 CZ-541 01 Trutnov / Czech Republic E-mail: [email protected] AXICOM Telecom-, Signal and RF Relays Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752