General Purpose Relays PCB Relays SCHRACK Miniature Power PCB Relay PB n1pole 10A, 1 form C (CO) or 1 form A (NO) cadmium-free contacts nClass F coil system standard nCompact and simple design gives high process security nProduct in accordance to IEC 60335-1 nEnvironmentally-friendly Typical applications White goods, small home appliances, heating temperature controllers F0224-C VZ Approvals Coil Data VDE REG.-Nr. 121560, UL E214025 Coil voltage range Operative range, IEC 61810 Technical data of approved types on request Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 10A Limiting making current, max 4 s, duty factor 10% 15A Breaking capacity max. 2500VA Contact material AgNi 90/10, AgSnO2 Frequency of operation, with/without load 360/36000h-1 Operate/release time max. 10/20ms Bounce time max., form A/form B 10/15ms Contact ratings Type IEC 61810 PB114; PB113 PB114 PB134; PB133 PB134 PB634 PB634 UL 508 PB1x4 Contact Load Cycles A/B (NO/NC) 10A/3A, 250VAC, cosφ=1, 85°C 30x103 A of C 10A, 250VAC, cosφ=1, 85°C 30x103 A (NO) 10A, 250VAC, cosφ=1, 85°C 20x103 A (NO) 6.5A, 440VAC, cosφ=1, 85°C 50x103 A (NO) 8.5A, 250VAC, cosφ=1, 85°C 100x103 A (NO) 10A, 250VAC, cosφ=1, 85°C 60x103 A (NO) 10A, 250VAC, cosφ=1, 85°C Mechanical endurance, DC coil PB1 PB5 PB6 Coil resistance Ω±10% Rated coil power mW 70 100 225 400 900 1344 1600 6400 357 360 360 360 360 360 360 360 48 69 274 1097 521 522 526 525 5 to 48 VDC 5 to 24 VDC 5 to 24 VDC 2 2 2 Coil versions, DC coil Coil Rated Operate Release code voltage voltage voltage VDC VDC VDC Coil versions, DC-coil, 360mW 005 5 3.75 0.5 006 6 4.50 0.6 009 9 6.75 0.9 012 12 9.00 1.2 018 18 13.50 1.8 022 22 16.50 2.2 024 24 18.00 2.4 048 48 36.00 4.8 Coil versions, DC-coil, 500mW 005 5 3.75 0.5 006 6 4.5 0.6 012 12 9 1.2 024 24 18 2.4 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 20x103 5x106 operations Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil form C (CO) version form A (NO) version Material group of insulation parts Tracking index of relay base 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 1000Vrms 2500Vrms ≥3/4mm ≥4/5mm IIIa PTI250 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Miniature Power PCB Relay PB (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire version PB1, PB5 according EN60335, par.30 Ambient temperature, DC coil -40 to +85°C Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional), form A/form B, 30 to 400Hz PB1, PB6 >10/4g PB5 >10/6 g Shock resistance (destructive) >100g Terminal type PCB-THT Weight 5.4g Resistance to soldering heat THT IEC 60068-2-20 270°C/10s Packaging/unit tube/35 pcs., box/1050 pcs. PCB layout1) / terminal assignment Bottom view on solder pins S0407-AA S0407-AB Dimensions S0407-AC 1) Layout note: No openings (e.g. holes, slots, cutouts, unused pins, open through connections, etc.) allowed under the relay base. The relay base must be fully covered by the pcb, recommended minimum distance between the relay and the edge of the printed circuit board is 5 mm. For more information, please contact our application support. S0406-A Product code structure Typical product code Type PB Miniature Power PCB Relay PB Version 1 Standard version 5 6 Contact arrangement 1 1 form C contact (1 CO) 3 Contact material 3 AgSnO2 4 Coil Coil code: please refer to coil versions table 2 Product code Version 1 1 4 012 500 mW version High performance version (form A version only) 1 form A contact (1 NO) AgNi 90/10 Contacts Contact material PB114005 Standard 1 form C AgNi 90/10 PB114006 class F 1 CO contact PB114012 PB114024 PB134005 1 form A PB134006 1 NO contact PB134012 PB134024 PB514012 500 mW 1 form C PB514024 version 1 CO contact PB634005 High 1 form A PB634006 performance 1 NO contact PB634012 version PB634024 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company PB Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil 5VDC 6VDC 12VDC 24VDC 5VDC 6VDC 12VDC 24VDC 12VDC 24VDC 5VDC 6VDC 12VDC 24VDC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 6-1415029-1 7-1415029-1 8-1415029-1 9-1415029-1 1415030-1 1-1415030-1 2-1415030-1 3-1415030-1 2-1415538-5 5-1415535-6 3-1415541-8 3-1415541-9 4-1415541-1 4-1415541-2 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.