SCHRACK General Purpose Relays Interface Plug-in Relay XT I 1 pole 16 A, 2 pole 8 A, 1 CO contact or 2 CO contacts I DC- or AC coil, sensitive coil 400 mW I Reinforced insulation, protection class II (VDE 0700) I 4 kV / 8 mm coil-contact I Manual test tab, optionally lockable1) I Version with mechanical and/or electrical indicator optionally available I Suitable for use in Tyco standard RT sockets I Recycleable packaging I RoHS compliant (Directive 2002/95/EC) F0289-A Applications Panel boards, mechanical engineering Approvals V REG.-Nr. B758, Z E214025 Technical data of approved types on request Contact data 1-pole Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Maximum breaking capacity AC Limiting making capacity,max 4 s, df 10% Contact material Mechanical endurance DC coil AC coil Rated frequency of operation with / without load Contact Type XT37* XT48* XT48* XT31* XT42* XT42* XT37* XT48* XT48* XT31* XT42* XT42* 2-pole 1 CO 2 CO single contact micro disconnection 16 A 8A 240/400 VAC 4000 VA 2000 VA 30 A 15 A AgNi 90/10 > 10 x 106 > 5 x 106 6 / 600 min-1 ratings Load 16 A, 250 VAC, CO contact, 70°C, DF 50%, EN61810-1 8 A, 250 VAC, CO contact, 70°C, DF 50%, DC coils, EN61810-1 8 A, 250 VAC, CO contact, 70°C, DF 50%, AC coils, EN61810-1 16 A, 250 VAC, CO contact, 70°C, DF 50%, EN61810-1 8 A, 250 VAC, CO contact, 70°C, DF 50%, DC coils, EN61810-1 8 A, 250 VAC, CO contact, 70°C, DF 50%, AC coils, EN61810-1 16 A, 250 VAC, CO General Purpose 70°C, DF 50%, UL508 8 A, 250 VAC, CO General Purpose 70°C, DF 50%, DC coils, UL508 8 A, 250 VAC, CO General Purpose 70°C, DF 50%, AC coils, UL508 16 A, 250 VAC, CO General Purpose 70°C, DF 50%, UL508 8 A, 250 VAC, CO General Purpose 70°C, DF 50%, DC coils, UL508 8 A, 250 VAC, CO General Purpose 70°C, DF 50%, AC coils, UL508 Cycles 30x103 50x103 30x103 30x103 50x103 30x103 30x103 30x103 30x103 30x103 30x103 30x103 Coil data Rated coil voltage range DC coil AC coil Coil power DC coil AC coil Operative range Coil insulation system according UL1446 6...110 VDC 24...230 VAC typ 400 mW typ 0.75 VA 2 class F 1) Locking function description If the test button is pulled out too forcefully, it may bypass the momentary testing position and go straight into the locked position. Delivery status is with testing possibility only, to reach locking position please remove the locking plastic pip according drawing. 1 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Interface Plug-in Relay XT (Continued) Coil versions, DC-coil Coil LED & Rated Operate Release Coil Rated coil opt. LED code PD* voltage voltage voltage resistance power power VDC VDC VDC Ohm mW mW 012 LB2 12 8.4 1.2 360+10% 400 10 +10% 024 LC4 24 16.8 2.4 1440+ 400 19 048 LE8 48 33.6 4.8 5520+10% 417 39 110 MB0 110 77.0 11.0 28800+12% 420 87 All figures are given for coil without preenergization, at ambient temperature +23°C *) Protection diode PD; standard polarity: +A1 / -A2 Other coil voltages on request Coil versions, AC-coil 50 Hz Coil LED Rated Operate Release Coil Rated coil opt. LED code voltage voltage voltage resistance power power 50 Hz 50 Hz 50 Hz 50 Hz VAC VAC VAC Ohm VA VA +10% 524 R24 24 18.0 3.6 350+ 0.76 0.012 615 S15 115 86.3 17.3 8100+15% 0.76 0.054 730 T30 230 172.5 34.5 32500 +15% 0.74 0.073 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request Insulation Dielectric strength coil-contact circuit 5000 Vrms in combination with RT78726 4000 Vrms in combination with RT78725 1000 Vrms 2500 Vrms W 8 / 8 mm W IIIa PTI 175 V open contact circuit adjacent contact circuits Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit adjacent contact circuits Rated insulation voltage Pollution degree Rated voltage system Overvoltage category reinforced functional basic 250 V 3 240 V Terminal assignment Bottom view on pins 1 CO contact 16 A 2 400 V III S0163-BE Other data 1-pole 2-pole RoHS - Directive 2002/95/EC compliant Flammability class according to UL94 V-0 Ambient temperature range DC coil -40...+70°C AC coil -40...+70°C Operate- / release time DC coil 9 / 6 ms Bounce time DC coil, NO / NC contact 4 / 12 ms Vibration resistance (function), NO / NC contact 20 / 5 g, 30 ... 500 Hz Shock resistance (destruction) 100 g Category of protection RTII Mounting distance 4,5 mm, dense packing of sockets Relay weight 16 g Packaging unit 10 / 250 pcs 2 CO contacts 8 A S0163-BJ s0538_BB Dimensions Accessories For Details see datasheet Accessories Interface Power Relay XT s0538_A 2 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Interface Plug-in Relay XT (Continued) Product key X T 4 Type Version 3 1-pole, 16 A, pinning 5 mm 4 2-pole, 8 A, pinning 5 mm Contact configuration 1 1 CO contact 7 1 CO contact with test button and mechanical indicator 2 2 CO contacts 8 2 CO contacts with test button and mechanical indicator Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table, preferred types in bold print Product key XT374LC4 XT374R24 XT374T30 XT484LC4 XT484R24 XT484T30 Contacts 1 CO contact 16 A 2 CO contacts 8A Cont. material AgNi 90/10 test button, mechanical and electrical indicator Coil DC-coil AC-coil DC-coil AC-coil Coil 24 VDC 24 VAC 230 VAC 24 VDC 24 VAC 230 VAC Part number 1887112-1 1887113-3 1887113-1 1887212-1 1887213-3 1887213-1 3 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.