General Purpose Relays Power Relay 430 3 mm I 1 pole 16 A, 1 NO contact I Safety mains isolation I Contact gap > 3 mm I DC- and AC-coil I 4 kV / 8 mm coil-contact, reinforced insulation (VDE 0700) I PCB mounting or quick connect terminals I Mounting brackets or snap mounting I Version with arc blow magnet for high DC-loads I Product in accordance to IEC60335-1 I RoHS compliant (Directive 2002/95/EC) as per product date code 0349 F0256-A Applications: Domestic appliances, industrial appliances, industrial controls Approvals V REG.-Nr. A513, Z E214024 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Maximum breaking capacity AC Limiting making capacity, max 4 s, duty factor 10% Contact material Contact gap Mechanical endurance Rated frequency of operation with / without load Contact Type 430X5 430X5 1NO bifurcated contact full disconnection 16 A 240/400 VAC 4000 VA 25 A AgCu3, AgCdO > 3 mm > 2,5x105 cycles 15 / 300 min-1 ratings Load 16 A, 250 VAC, resistive, 70°C 10 A, 250 VAC, resistive, 105°C Cycles 1,5x105 1,5x105 Coil data Rated coil voltage range DC coil AC coil Coil power DC coil AC coil Operative range Coil versions, DC-coil Coil Rated code voltage VDC 09 12 10 24 11 48 13 110 Operate voltage VDC 7.8 15.6 31.2 71.5 6...110 VDC 6...240 VAC 1W 1,8 VA 2 Release voltage VDC 0.6 1.2 2.4 5.5 Coil resistance Ohm 145+10% 580+10% 2200+10% 13000+10% Rated coil power mW 993 993 1047 931 Coil versions, AC-coil 50Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VAC VAC VAC Ohm VA 23 24 18 3.6 145+10% 1.8 25 60 45 9.0 950+10% 1.8 26 110 83 16.0 3100+10% 1.8 27 230 175 35.0 11400+10% 1.8 28 240 185 36.0 13000+10% 1.8 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. FH1 Issued 2006/08 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power Relay 430 3 mm (Continued) Insulation PCB layout / terminal assignment Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Bottom view on solder pins 4000 Vrms 2000 Vrms W 8 / 8 mm W IIIa PTI 380H reinforced basic 250 V 3 230/400 V III Other data S0448-AE RoHS - Directive 2002/95/EC Ambient temperature range Operate- / release time Bounce time NO / NC contact Shock resistance (destruction) Category of protection Mounting Resistance to soldering heat Relay weight Packaging unit compliant as per product date code 0349 -20...+70°C typ. 15 / 8 ms typ. 4 ms 100 g RT I - dust protected pcb, mounting brackets, snap mounting, DIN rail 270°C / 10 s 32 g 50 pcs S0448-AF Dimensions Snap mounting S0449-AB S0449-AH 2 Datasheet Rev. FH1 Issued 2006/08 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power Relay 430 3 mm (Continued) Dimensions Mounting brackets DIN-rail mount S0449-AK S0449-AD Product key 0 4 3 0 Type Mounting 0 PCB version 2 1 mounting brackets 5 Contact design 4 arc blowing magnet 5 standard Coil Coil code: please refer to coil versions table Contact material 0 AgCu 3 1 Other types on request Product key 0430 25 0911 00 0430 25 1011 00 0430 25 2811 00 Version snap mounting 1.0mm plate 1 0 0 snap mounting DIN-rail mounting AgCdO Cont-material AgCdO Cont.configuration 1 NO contact Coil DC-coil AC-coil Coil 12 VDC 24 VDC 240 VAC Part number 1-1415404-1 1-1415404-3 1-1415404-6 3 Datasheet Rev. FH1 Issued 2006/08 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.