HWS443 GaAs DC-2.5 GHz SPDT Switch September 2006 V2 SOT-26 Features • Low Insertion Loss: 0.35 dB @ 2 GHz • Isolation: 26 dB @ 2 GHz • P1dB: +25 dBm Typical @ +3V • IP3: 43 dBm • Low DC Power Consumption • Low Cost SOT-26 Plastic Lead (Pb) Free Package • Lead Free and RoHS Compliant Version of HWS305 Description The HWS443 is a GaAs MMIC SPDT switch in a low cost SOT-26 plastic lead (Pb) free package. The HWS443 features low insertion loss with very low DC power consumption. This general purpose switch can be used in analog and digital wireless communication systems. Electrical Specifications at 25°C with 0, +3V Control Voltages Parameter Test Conditions Insertion Loss DC-1.0 GHz DC-2.5 GHz Isolation DC-1.0 GHz DC-2.0 GHz DC-2.5 GHz Return Loss Input Power for One dB Compression Min. Max. Unit 0.30 0.40 0.50 0.60 dB dB 28 26 22 dB dB dB DC-2.5 GHz 20 dB 0.5-2.5 GHz @ 0/+3V @ 0/+5V 25 30 dBm dBm +5 dBm Per Tone @ 0.5-2.5 GHz @ 0/+3V @ 0/+5V 43 48 dBm dBm Switching Time 50 ns Control Current 5 Input Third Order Intermodulation Intercept Point 25 23 20 Typ. 50 Note: All measurements made in a 50 ohm system with 0/+3V control voltages, unless otherwise specified. Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. uA HWS443 GaAs DC-2.5 GHz SPDT Switch September 2006 Typical Performance Data @ +25°C Absolute Maximum Ratings Parameter Insertion Loss vs Frequency 0.0 Insertion Loss(dB) V2 Absolute Maximum RF Input Power 0.5-2.5 GHz +30 dBm Control Voltage +6V -0.2 -0.4 Operating Temperature -40°C to +85°C -0.6 Storage Temperature -65°C to +150°C -0.8 Pin Out (Top View) -1.0 0.5 1.0 1.5 2.0 Frequency(GHz) 2.5 3.0 CB RF2 GND CA 1 6 2 5 VC2 RFC Isolation vs Frequency CB 3 RF1 -10 4 VC1 CA CB Isolation(dB) -15 DC blocking capacitors CB are required on all RF ports. CB=CA=51pF for operating frequency > 500MHz. -20 -25 Logic Table for Switch On-Path -30 -35 -40 0.5 1.0 1.5 2.0 Frequency(GHz) 2.5 3.0 VC1 VC2 RFC-RF1 RFC-RF2 1 0 Insertion Loss Isolation 0 1 Isolation Insertion Loss ‘1’ = +3V to +5V ‘0’ = 0V to +0.2V Return Loss vs Frequency -10 Return Loss(dB) -15 -20 -25 -30 -35 -40 0.5 1.0 Hexawave Inc. 1.5 2.0 Frequency(GHz) 2.5 3.0 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice.