Common Mode Inductor For DC/DC Power supply PARAMETER MIN. Inductance @ 0.20 Vrms / 1 kHz TYP. MAX. UNITS 1.0 RMS rated Current for 40OC rise. Leakage Inductance 100 mΩ 3 A Rated Voltage: 250 VAC, 50/60 Hz µH 16 Creepage Between Windings Operating Temperature: -250C to 85OC. mH DCR Max. of each Winding Dielectric Strength Single Layer Windings with Spacers specially designed by Rhombus Industries to provide 3mm Creepage and Clearance for International Safety Compliance. 1500 Vrms 3.0 mm Insulation resistance: 100 MΩ @ 500 VDC DO NOT EXCEED RATED RMS CURRENT. Schematic Diagram 1 2 3 4 Physical Dimensions - inches (mm) 1.10 (28.0) Typ. .460 (11.7) Typ. .790 (20.0) Typ. .380 (9.7) Typ. 2 4 .750 (19.1) Typ. 1 Leads are #22 AWG Lead Diameter .025 (0.64) 3 .200 (5.1) Typ. Leads Stripped to within 0.062 (1.58) of the coil. RHOMBUS P/N: L-1028 CUST P/N: NAME: DATE: 01/08/00 SHEET: Rhombus Industries Inc. Transformers & Magnetic Products 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 www.rhombus-ind.com