Common Mode Inductor For DC/DC Power supply Single Layer Windings with Spacers specially designed by Rhombus Industries to provide 3mm Creepage and Clearance for International Safety Compliance. PARAMETER MIN. MAX. UNITS Inductance @ 200 mVrms / 200 kHz .742 1.11 mH 7.0 mΩ RMS rated Current for 40 C rise. 20 A Leakage Inductance 12 µH DCR Max. of each Winding O Dielectric Strength 1250 Vrms 3.0 mm Creepage Between Windings DO NOT EXCEED RATED RMS CURRENT. Operating Temperature: These parts are made with materials rated for 1300C minimum, and these components can be safely operated up to 130OC. * * AMBIENT + TEMPERATURE RISE. In addition, inductance will be effected by an increase in temperature. Typically: 20% increase to 500C 40% increase to 1000C 65% increase to 1300C Physical Dimensions - inches (mm) 1.36 (34.54). Schematic Diagram .770 (19.55) Typ. .500 (12.70) Typ. .950 (24.1) Typ. 1 2 .300 (7.62) .200 (5.08) 3 Leads Stripped to within 0.040 (1.02) of the coil. 4 LEADS ARE # 14 AWG Lead Diameter .0641(1.62) RHOMBUS P/N: L-522 CUST P/N: NAME: DATE: 11/20/02 SHEET: Rhombus Industries Inc. Transformers & Magnetic Products 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 www.rhombus-ind.com