LL4148 / LL4448 Vishay Semiconductors Small Signal Fast Switching Diodes Features • Silicon Epitaxial Planar Diodes • Electrical data identical with the devices e2 1N4148 and 1N4448 respectively • Lead (Pb)-free component • Component in acc. to RoHS 2002/95/EC and WEEE 2002/96/EC Applications 94 9371 • Extreme fast switches Mechanical Data Case: MiniMELF Glass case (SOD80) Weight: approx. 31 mg Cathode Band Color: Black Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Ordering code Remarks LL4148 Part VRRM = 100 V, VF = max. 1000 mV at IF = 50 mA Type differentiation LL4148-GS18 or LL4148-GS08 Tape and Reel LL4448 VRRM = 100 V, VF = max. 1000 mV at IF = 100 mA LL4448-GS18 or LL4448-GS08 Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Repetitive peak reverse voltage Reverse voltage Peak forward surge current tp = 1 µs Repetitive peak forward current Forward continuous current Average forward current VR = 0 Power dissipation Symbol Value VRRM 100 Unit V VR 75 V IFSM 2 A IFRM 500 mA mA IF 300 IFAV 150 mA PV 500 mW Symbol Value Unit RthJA 500 K/W Tj 175 °C Tstg - 65 to + 175 °C Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Junction to ambient air Junction temperature Storage temperature range Document Number 85557 Rev. 1.8, 24-Mar-06 Test condition on PC board 50 mm x 50 mm x 1.6 mm www.vishay.com 1 LL4148 / LL4448 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Forward voltage Reverse current Part Symbol Min IF = 5 mA LL4448 VF 620 IF = 50 mA LL4148 VF IF = 100 mA LL4448 VF Typ. Max Unit 720 mV 860 1000 mV 930 1000 mV IR 25 nA VR = 20 V, Tj = 150 °C IR 50 µA VR = 75 V IR 5 µA VR = 20 V Breakdown voltage IR = 100 µA, tp/T = 0.01, tp = 0.3 ms Diode capacitance VR = 0, f = 1 MHz, VHF = 50 mV CD Rectification efficiency VHF = 2 V, f = 100 MHz ηr Reverse recovery time IF = IR = 10 mA, iR = 1 mA IF = 10 mA, VR = 6 V, iR = 0.1 x IR, RL = 100 Ω V(BR) 100 V 4 pF trr 8 ns trr 4 ns 45 % Typical Characteristics Tamb = 25 °C, unless otherwise specified 1000 1000 LL4448 IF - Forward Current (mA) IF - Forward Current (mA) LL4148 100 Scattering Limit 10 1 100 Scattering Limit 10 1 Tj = 25 ° C Tj = 25 °C 0.1 0.1 0 94 9096 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Figure 1. Forward Current vs. Forward Voltage www.vishay.com 2 0 94 9097 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Figure 2. Forward Current vs. Forward Voltage Document Number 85557 Rev. 1.8, 24-Mar-06 LL4148 / LL4448 Vishay Semiconductors 3.0 C D - Diode Capacitance (pF) I R - Reverse Current (nA) 1000 Tj = 25 °C 100 Scattering Limit 10 1 f = 1 MHz Tj = 25 °C 2.5 2.0 1.5 1.0 0.5 0 1 94 9098 10 100 0.1 V R - Reverse Voltage (V) Figure 3. Reverse Current vs. Reverse Voltage 1 10 100 V R - Reverse Voltage (V) 94 9099 Figure 4. Diode Capacitance vs. Reverse Voltage Package Dimensions in mm (Inches) 1.6 (0.063) 1.4 (0.055) Cathode indification 0.47 max. (0.019) 3.7 (0.146) 3.3 (0.130) 2.5 (0.098) max 1.25 (0.049) min 2.0 (0.079) min foot print recommendation: 5.0 (0.197) ref Document no.: 6.560-5005.01-4 Rev. 7 - Date: 07.February.2005 96 12070 Document Number 85557 Rev. 1.8, 24-Mar-06 www.vishay.com 3 LL4148 / LL4448 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85557 Rev. 1.8, 24-Mar-06 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1