LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only FEATURES *1.947-INCH (49.45-mm) MATRIX HEIGHT. *LOW POWER REQUIREMENT. *SINGLE PLANE, WIDE VIEWING ANGLE. *5×8 ARRAY WITH X-Y SELECT. *COMPATIABLE WITH USASCII AND EBCDIC CODES. *STACKABLE VERTICALLY AND HORIZONTALLY. *EASY MOUNTING ON P.C. BOARD. *CATEGORIZED FOR LUMINOUS INTENSITY. *LEAD-FREE PACKAGE DESCRIPTION The LTP-2P58BF is a 1.947-inch (49.45-mm) matrix height 5×8 dot matrix displays. This device is Full color applicable displays and has black face and white dots. This device uses AlGaAs RED LED chips (AlGaAs epi on GaAs substrate). This device uses InGaN GREEN LED chips (InGaN epi on SiC substrate). This device uses BLUE LED chips (GaN epi on SiC substrate). DEVICE PART NO. DESCRIPTION FULL COLOR Cathode Column Anode Row LTP-2P58BF PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 1 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerances are ± 0.25-mm (0.01“) unless otherwise noted. INTERNAL CIRCUIT DIAGRAM PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 2 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only PIN CONNECTION No. CONNECTION 1 ANODE ROW 8 2 ANODE ROW 7 3 ANODE ROW 6 4 ANODE ROW 5 5 CATHODE COLUMN 4 GREEN 6 CATHODE COLUMN 4 BLUE 7 CATHODE COLUMN 4 AlGaAs RED 8 CATHODE COLUMN 5 GREEN 9 CATHODE COLUMN 5 BLUE 10 CATHODE COLUMN 5 AlGaAs RED 11 ANODE ROW 1 12 ANODE ROW 2 13 ANODE ROW 3 14 ANODE ROW 4 15 CATHODE COLUMN 2 AlGaAs RED 16 CATHODE COLUMN 2 BLUE 17 CATHODE COLUMN 2 GREEN 18 CATHODE COLUMN 1 AlGaAs RED 19 CATHODE COLUMN 1 BLUE 20 CATHODE COLUMN 1 GREEN 21 CATHODE COLUMN 3 GREEN 22 CATHODE COLUMN 3 BLUE 23 CATHODE COLUMN 3 AlGaAs RED PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 3 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATINGS PARAMETER AlGaAs RED UNIT Average Power Dissipation Per Dot 36 mW Peak Forward Current Per Dot ( Frequency 1Khz, 10% duty cycle) 125 mA Average Forward Current Per Dot Derating Linear From 25℃ Per Dot t 15 0.2 mA mA/0C Reverse Voltage Per Dot 5 V 0 0 Operating Temperature Range -35 C to +85 C Storage Temperature Range -350C to +850C Solder Temperature: max 2600C for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL/OPTICAL CHARACTERISTICS AT Ta=25℃ AlGaAs RED PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Ip=80mA Average Luminous Intensity IV 7500 µcd Peak Emission Wavelength λp 660 nm IF=20mA Spectral Line Half-Width ∆λ 35 nm IF=20mA Dominant Wavelength λd 638 nm IF=20mA Forward Voltage any Dot VF 1.8 2.4 V IF=20mA Reverse Current any Dot IR 100 µA VR=5V IV-m 2:1 Luminous Intensity Matching Ratio 1/16Duty Ip=80mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 4 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATINGS PARAMETER GREEN UNIT Average Power Dissipation Per Dot 70 mW Peak Forward Current Per Dot ( Frequency 1Khz, 10% duty cycle) 60 mA Average Forward Current Per Dot Derating Linear From 25℃ Per Dot 25 0.33 mA mA/0C 10 V Reverse Voltage Per Dot Operating Temperature Range -350C to +850C Storage Temperature Range -350C to +850C Solder Temperature: max 2600C for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL/OPTICAL CHARACTERISTICS AT Ta=25℃ GREEN PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Ip=80mA Average Luminous Intensity IV 70000 µcd Peak Emission Wavelength λp 523 nm IF=20mA Spectral Line Half-Width ∆λ 36 nm IF=20mA Dominant Wavelength λd 525 nm IF=20mA Forward Voltage any Dot VF 3.5 4 V IF=20mA Reverse Current any Dot IR 100 µA VR=10V IV-m 2:1 Luminous Intensity Matching Ratio 1/16Duty Ip=80mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 5 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATINGS PARAMETER BLUE UNIT Average Power Dissipation Per Dot 72 mW Peak Forward Current Per Dot ( Frequency 1Khz, 35% duty cycle) 60 mA Average Forward Current Per Dot Derating Linear From 25℃ Per Dot 14 0.19 mA mA/0C 5 V Reverse Voltage Per Dot Operating Temperature Range -350C to +850C Storage Temperature Range -350C to +850C Solder Temperature: max 2600C for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL/OPTICAL CHARACTERISTICS AT Ta=25℃ BLUE PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Ip=80mA Average Luminous Intensity IV 4800 µcd Peak Emission Wavelength λp 430 nm IF=20mA Spectral Line Half-Width ∆λ 65 nm IF=20mA Dominant Wavelength λd 468 nm IF=20mA Forward Voltage any Dot VF 3.8 4.5 V IF=20mA Reverse Current any Dot IR 100 µA VR=5V IV-m 2:1 Luminous Intensity Matching Ratio 1/16Duty Ip=80mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 6 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 7 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 8 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 9 of 9