LITEON LTP-757KR-01

LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
FEATURES
*0.7INCH (17.22mm) DIGIT HEIGHT.
*CONTINUOUS UNIFORM SEGMENTS.
*LOW POWER REQUIREMENT.
*EXCELLENT CHARACTERS APPEARANCE.
*HIGH BRIGHTNESS & HIGH CONTRAST.
*WIDE VIEWING ANGLE.
*SOLID STATE RELIABILITY.
*CATEGORIZED FOR LUMINOUS INTENSITY.
DESCRIPTION
The LTP-757KR-01 is a 0.7inch (17.22mm) matrix height 5 x 7
dot matrix display. This device utilizes AlInGap Super Red LED
chips, which are made from AlInGaP on a non-transparent GaAs
substrate, and has a gray face and white dots.
DEVICE
PART NO.
DESCRIPTION
AlInGaP SUPER RED
Cathode Column
Anode Row
LTP-757KR-01
PART NO.: LTP-757KR-01
BNS-OD-C131/A4
PAGE:
1 of 5
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
PACKAGE DIMENSIONS
NOTES: All dimensions are in millimeters. Tolerances are ± 0.25-mm (0.01“) unless otherwise noted.
INTERNAL CIRCUIT DIAGRAM
PART NO.: LTP-757KR-01
BNS-OD-C131/A4
PAGE:
2 of 5
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
PIN CONNECTION
PART NO.: LTP-757KR-01
BNS-OD-C131/A4
No.
CONNECTION
1
CATHODE COLUMN 1
2
ANODE ROW 3
3
CATHODE COLUMN 2
4
ANODE ROW 5
5
ANODE ROW 6
6
ANODE ROW 7
7
CATHODE COLUMN 4
8
CATHODE COLUMN 5
9
ANODE ROW 4
10
CATHODE COLUMN 3
11
ANODE ROW 2
12
ANODE ROW 1
PAGE:
3 of 5
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
ABSOLUTE MAXIMUM RATING AT TA=25oC
PARAMETER
MAXIMUM RATING
UNIT
Average Power Dissipation Per dot
33
mW
Peak Forward Current Per dot
90
mA
13
0.17
mA
mA/0C
Average Forward Current Per dot
Derating Linear From 250C Per dot
Reverse Voltage Per dot
5
V
0
0
Operating Temperature Range
-35 C to +85 C
Storage Temperature Range
-350C to +850C
Solder Temperature 1/16 inch Below Seating Plane for 3 Seconds at 2600C
ELECTRICAL / OPTICAL CHARACTERISTICS AT TA=25oC
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
3400
µcd
IP=32mA , 1/16Duty
λp
639
nm
IF=20mA
Spectral Line Half-Width
∆λ
20
nm
IF=20mA
Dominant Wavelength
λd
631
nm
IF=20mA
Forward Voltage Per dot
VF
2.0
2.6
V
IF=20mA
Reverse Current Per dot
IR
100
µA
VR=5V
IV-m
2:1
Average Luminous Intensity
IV
Peak Emission Wavelength
Luminous Intensity Matching Ratio
1650
IP=18mA , 1/16Duty
Note: Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.
PART NO.: LTP-757KR-01
BNS-OD-C131/A4
PAGE:
4 of 5
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES
(25oC Ambient Temperature Unless Otherwise Noted)
PART NO.: LTP-757KR-01
BNS-OD-C131/A4
PAGE:
5 of 5