MIL-PRF 24758A MIL-PRF-24758-13 Adapter for MS-3155 Type Connectors M24758 - 13 C 20 Basic No. Conduit Size Code, Table I Connector Dash No., Table II 1.50 (38.10) Max MS3155 design standard applies L A thread D E K C thread for M24758A-2, -3, -4 fittings Coupling nut Adapter TABLE I APPLICATION NOTES C CONDUIT SIZE CLASS - 2A CODE THREAD 1. Assembly identified with manufacurer’s code identification number (Glenair, part number and classification code 490). 2. The M24758-13 adapter couples connectors listed in table ll to M24758-2, M24758-3 or M24758-4 series conduit fittings. 3. The coupling nut end of this adapter shall conform to military standard MS3155 (navy), ‘Connector, electric, rear accessory design standard.” MS3155 takes precedence over this specification. 4. Configuration of adapter may change based on the variance of diameters E and K. 5. Material / Finish: Adapter, coupling nut, 316 / electroless nickel, matte finish. 6. Metric dimensions (mm) are indicated in parentheses. L +.03 (.76) -.00 K DIA MIN A .438-28 UNEF .21 (5.25) .245 (6.22) B .688-24 UNEF .25 (6.35) .495 (12.57) C .938-20 UNEF .31 (7.87) .745 (18.92) D 1.250-18 UNEF .37 (9.40) .995 (25.27) E 1.563-18 UNEF .37 (9.340) 1.245 (31.62) F 1.875-16 UN .43 (10.92) 1.495 (37.97) G 2.375-16 UN .43 (10.92) 1.995 (50.67) H 2.875-16 UN .43 (10.92) 2.495 (63.37) J .563-24 UNEF .25 (6.35) .370 (9.40) K .813-20 UNEF .31 (7.87) .620 (15.75) L 3.375-16 UN .43 (10.92) 2.995 (76.07) 7. See M24758-2, -3, -4 torque values for C thread. © 2007 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] 26 www.glenair.com MIL-PRF 24758A MIL-PRF-24758-13 Adapter for MS-3155 Type Connectors TABLE II: CONNECTOR DASH NUMBERS AND FITTING DIMENSIONS CONN NAS 1599 & DASH MIL-DTL-83723 NO. (SERIES 1 & 3) MIL-DTL-5015 (MS3400 SERIES) AS81703 MIL-DTL-26482 (NAVY) (SERIES 2) (SERIES 3) (MS347X) A CLASS - 2B THREAD D DIA MAX E DIA REF 03 -- -- 03 -- .562-24 UNEF .669 .270 (16.99) (6.86) 08 08 8S -- 08 .500-20 UNF .617 .270 (15.67) (6.86) 10 10 10S, 10SL -- 10 .625-24 UNEF .734 .375 (18.64) (9.53) 12 12 12, 12S 07 12 .750-20 UNEF .858 .511 (21.79) (12.98) 14 14 14, 14S 12 14 .875-20 UNEF .984 .585 (24.99) (14.86) 16 16 16, 16S 19 16 1.000-20 UNEF 1.112 .710 (28.24) (18.03) 18 18 18 27 18 1.062-18 UNEF 1.218 .789 (30.98) (20.04) 20 20 20 37 20 1.188-18 UNEF 1.345 .914 (34.16) (23.22) 22 22 22 -- 22 1.312-18 UNEF 1.468 1.039 (37.29) (26.39) 24 24 24 -- 24 1.438-18 UNEF 1.593 1.154 (40.46) (29.31) 28 -- 28 -- -- 1.750-18 UNS 1.969 1.389 (50.01) (35.28) 32 -- 32 -- -- 2.000-18 UNS 2.219 1.635 (56.36) (41.53) 36 -- 36 -- -- 2.250-16 UN 2.469 1.850 (62.71) (46.99) 40 -- 40 -- -- 2.500-16 UN 2.719 2.065 (69.06) (52.45) 44 -- 44 -- -- 2.750-16 UN 2.969 2.320 (75.41) (58.93) 48 -- 48 -- -- 3.000-16 UN 3.219 2.570 (81.76) (65.28) 61 -- -- 61 -- 1.500-18 UNEF 1.653 1.194 (41.99) (30.33) © 2007 Glenair, Inc. CAGE Codes 06324 Recommended A Thread Torque +5 in. pounds 76 56 76 108 116 116 116 136 136 136 148 148 148 164 164 164 136 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] 27 www.glenair.com