MIL-PRF 24758A MIL-PRF-24758-11 Adapter for Coaxial Connectors M24758 - 11 C 02 Basic No. Conduit Size Code, Table I A Thread Code, Table II (See Note 3) L H E K D A thread (torque to 40 inch lbs.) C thread for M24758A-2, -3, -4 fittings .25 (6.35) APPLICATION NOTES 1. Assembly identified with manufacurer’s code identification number (Glenair, part number and classification code 490). 4. Configuration of adapter may change based on the variance of diameters E and K. 2. The M24758-11 adapter couples coaxil connectors to M24758-2, M24758-3, M24758-4 series fittings. 5. Material / Finish: Adapter - 316 / electroless nickel, matte finish 3. Select an A-thread from table II which matches that of the back of the nut on the connector being used. If none of the A-threads match, substitute the desired A-thread information in lieu of the A-thread code in the part number. For example: A fitting for a 0.500” conduit with a 0.5-28 A-thread of 0.313’ H-length would have the part number: M2475811B0.5-28-0.313. 6. Metric dimensions (mm) are indicated in parentheses. © 2007 Glenair, Inc. 7. See M24758-2, -3, -4 torque values for C thread. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] 22 www.glenair.com MIL-PRF 24758A MIL-PRF-24758-11 Adapter for Coaxial Connectors TABLE I CONDUIT SIZE CODE C CLASS - 2A THREAD L +.03 (.76) -.00 K DIA MIN A .438-28 UNEF .21 (5.25) .245 (6.22) B .688-24 UNEF .25 (6.35) .495 (12.57) C .938-20 UNEF .31 (7.87) .745 (18.92) D 1.250-18 UNEF .37 (9.40) .995 (25.27) E 1.563-18 UNEF .37 (9.40) 1.245 (31.62) J .563-24 UNEF .25 (6.35) .370 (9.40) K .813-20 UNEF .31 (7.87) .620 (15.75) TABLE II: A-THREAD CODE AND ADAPTER DIMENSIONS CABLE (REFRENCE) A THREAD CODE A THREAD D DIA +.02 (.51) E DIA + .02 (.51) H + .03 (.76) 02 .375-32 UNEF .687 (17.45) .226 (5.74) .210 (5.33) RG-58, RG-233 04 .438-28 UNEF .937 (23.78) .345 (8.76) .250 (6.35) RG-5, RG-21 06 .625-24 UNEF 1.187 (30.15) .433 (10.83) .310 (7.87) RG-9, RG-214 08 .688-24 UNEF 1.500 (38.10) .568 (14.43) .310 (7.87) RG-14, RG-293 10 .938-20 UNEF .812 (20.63) .650 (16.51) .310 (7.87) RG-57, RG-294 12 .813-20 UNEF 1.062 (26.98) .895 (22.73) .310 (7.87) RG-17 © 2007 Glenair, Inc. CAGE Codes 06324 TYPE OD .195 (4.95) .216 (54.86) .332 (8.43) .420 (10.67) .425 (10.80) .545 (13.84) .625 (15.88) .630 (16.00) .870 (22.10) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] 23 www.glenair.com