SWD-109-PIN Single Driver for GaAs FET Switches and Attenuators Rev. V6 Features • • • • • High Speed CMOS Technology Single Channel Positive Voltage Control Low Power Dissipation Low Cost Plastic SOIC-8 Package Functional Schematic Description The SWD-109-PIN is a single channel driver used to translate TTL control inputs into gate control voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. The output HIGH level is optionally 0 to +2.0V (relative to GND) to optimize the intermodulation products of the control devices at low frequencies. Pin Configuration Ordering Information Pin No. Function 1 Output A Package 2 GND SWD-109-PIN Bulk Packaging 3 Vcc Part Number SWD-109TR Package 1000 piece reel 4 C1, Logic 5 Vee 6 Vopt 7 GND 8 Output B Part Number Ordering Information Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SWD-109-PIN Single Driver for GaAs FET Switches and Attenuators Rev. V6 Guaranteed Operating Ranges Symbol Parameter 1 Unit Min. Typ. Max. VCC Positive DC Supply Voltage V 4.5 5.0 5.5 Negative DC Supply Voltage V -8.5 -5.0 -4.5 Optional DC Output Supply Voltage V 0 1.0 2.0 VOPT-VEE Negative Supply Voltage Range V 4.5 6.5 11.0 VCC-VEE Positive to negative Supply Range V 9.0 10.0 14.0 TA Operating Ambient temperature °C -40 +25 +85 IOH DC Output Current - High mA — — -1.0 IOL DC Output Current - Low mA — — 1.0 Trise, Tfall Maximum Input Rise or Fall Time ns — — 500 VEE VOPT 2 1. All voltages are relative to GND. 2. VOPT is grounded for most applications. To improve the intermodulation performance and the 1 dB compression point of GaAs control devices at low frequencies, VOPT can be increased to between 1.0 and 2.0V. The nonlinear characteristics of the GaAs control devices will approximate performance at 500 MHz. It should be noted that the control current is on the GaAs MMICs will increase when positive controls are applied. DC Characteristics over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min. Typ. Max. VIH Input High Voltage Guaranteed High Input Voltage V 2.0 — — VIL Input Low Voltage Guaranteed Low Input Voltage V — — 0.8 VIH Output High Voltage IOH = -1 mA VEE = Max V VOPT -0.1 — — VOL Output Low Voltage IOL = 1 mA VEE = Max V — — VEE +0.1 IIN Input Leakage Current VIN = VCC or GND VEE = Min µA — .01 10 ICC Quiescent Supply Current VCC = Max VOPT = Min or Max VEE = Min VIN = VCC or GND µA — — 100 Δ ICC Additional Supply Current, per TTL Input pin VCC= Max VIN = VCC -2.1V mA — — 1.0 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Truth Table Input Outputs C1 A B Logic “0” VEE VOPT Logic “1” VOPT VEE 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SWD-109-PIN Single Driver for GaAs FET Switches and Attenuators Rev. V6 AC Characteristics Over Guaranteed Operating Range3 Symbol Parameter -55 to +25°C <+85°C <+125°C Unit TPLH Propagation Delay 22 25 30 ns TPHL Propagation Delay 22 25 30 ns TTLH Output Rising Transition Time 9.0 9.0 9.0 ns TTHL Output Falling Transition Time 8.0 8.0 8.0 ns Tskew Delay Skew, Output A to Output B 4.0 4.0 4.0 ns CIN Input Capacitance 10 10 10 pF 10 10 10 pF 140 140 140 pF 4 CPDC Power Dissipation Capacitance CPDE Power Dissipation Capacitance 4 3. VCC = 4.5V, VOPT - VEE = min or max, VOPT = 0V, CL = 25 pF, Trise, Tfall = 6ns. These conditions represent the worst case for slow delays. 4. Total Power Dissipation is calculated by the following formula: PD = VCC 2fC PDC + (VOPT-VEE) 2fCPDE Absolute Maximum Ratings5 Symbol Parameter Min Max Unit VCC Positive DC Supply Voltage -0.5 7.0 V VEE Negative DC Supply Voltage -9.0 0.5 V VOPT Optional DC Output Supply Voltage -0.5 Vcc +0.5 V VOPT-VEE Output to Negative Supply Voltage Range -0.5 11.0 V VCC-VEE Positive to Negative Supply Voltage Range -0.5 14.0 V VI DC Input Voltage -0.5 VCC +0.5 V II DC Input Current -25 25 mA VO DC Output Voltage VEE – 0.5 VOPT +0.5 V PD6 Power Dissipation in Still Air — 500 mW VO DC Output Current -25 25 mA TSTG Storage Temperature -65 150 °C Switching Waveforms 5. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures. 6. Derate -7 mW/°C from 65°C to 85°C. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SWD-109-PIN Single Driver for GaAs FET Switches and Attenuators Rev. V6 SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.