MA-COM SW-114-PIN

SW-114-PIN
SP4T RF Switch,
10 - 2000 MHz
Rev. V3
Features
•
•
•
•
•
•
Functional Block Diagram
Ultra Broadband
High Isolation: 60 dB Typical
Integral TTL Driver
Hermetic Package
50 Ohm Nominal Impedance
MIL-STD-883 Screening Available
Description
Ordering Information
Part Number
Package
SW-114-PIN
DI-2
Truth Table
TTL Control Inputs
“1” = TTL Logic High
Note: Reference Application Note M513 for reel size
information.
Note: Die quantity varies.
Condition of Switch
RF Common to each
RF Port
1
2
3
4
RF1
RF2
RF3
RF4
1
0
0
0
On
Off
Off
Off
0
1
0
0
Off
On
Off
Off
0
0
1
0
Off
Off
On
Off
0
0
0
1
Off
Off
Off
On
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
SW-114-PIN
SP4T RF Switch,
10 - 2000 MHz
Rev. V3
Electrical Specifications: TA = -55°C to +85°C 1
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Insertion Loss
—
10 - 2000 MHz
10 - 1000 MHz
10 - 500 MHz
dB
dB
dB
—
—
—
—
—
—
2.8
2.1
1.8
VSWR
—
10 - 2000 MHz
10 - 1000 MHz
Ratio
Ratio
—
—
—
—
1.8:1
1.2:1
Isolation
—
10 - 2000 MHz
10 - 1000 MHz
10 - 500 MHz
dB
dB
dB
35
45
60
—
—
—
—
—
—
µS
µS
mV
—
—
—
2.0
1.0
40
—
—
—
Ton
Toff
Transients
In-band
—
—
—
1 dB Compression
Input Power
—
dBm
—
+13
—
IP2
For two tone input power up to +5 dBm
—
dBm
—
+60
—
IP3
For two tone input power up to +5 dBm
—
dBm
—
+30
—
Bias Power
+9 to +15 VDC @ 50 mA Max
-5 VDC ± 5% @ 35 mA Max
—
mW
—
550
—
1. All specifications apply when operated with bias voltages of +12 VDC and –5 VDC (± 5%) and 50 ohm impedance at all RF
ports.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
SW-114-PIN
SP4T RF Switch,
10 - 2000 MHz
Rev. V3
Typical Performance Curves
Insertion Loss
Isolation
+8 5°C
+2 5°C
100
- 55°C
3.0
Isolation (dB)
Insertion Loss (dB)
80
2.0
1.0
60
40
20
2
0.0
2
5
10
50
100
500
1000
2000
1000
2000
5
10
50
100
500
1000
2000
Frequency (M Hz)
F re que nc y ( M H z)
VSWR
1.8
1.6
VSWR
1.4
1.2
1.0
2
5
10
50
100
500
Frequency (M Hz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.