MAPDCT0027 2 Way 0º Power Divider 5-1000MHz Rev. V3 Schematic Features • • • • • • SMT unit 2 Way 0 degree 260°C Reflow Compatible RoHS* Compliant RoHS version of MACPES0007 Available on Tape and Reel. Description M/A-COM Technology Solutions MAPDCT0027 is 2 way 0 degree RF power divider in a low cost, surface mount package. An external 180 Ohm resistor is required between the two outputs ports. Ideally suited for high volume CATV/Broadband applications. Component Dimensions: Pin Configuration Pin No. Function 1 Ground 2 Not connected (ground) 3 Output 2 4 Output 1 5 Not connected (ground) 6 Input Dimensions in inches [mm]. Tolerance where not specified: .xx ± .02, .xxx ± .010 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0027 2 Way 0º Power Divider 5-1000MHz Rev. V3 Electrical Specifications: TA = 25°C, Z0 = 75Ω 1 Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss - 5 - 500 MHz 500 - 1000 MHz dB dB - 0.4 0.7 0.7 1.0 Amplitude Unbalance (Nominal 0dB) - 5 - 500 MHz 500 - 1000 MHz dB dB - 0.28 0.32 ± 0.4 ± 0.6 Phase Unbalance (Nominal 180º) - 5 - 1000 MHz º - 1.00 ± 3.0 Return Loss: Input - 5 - 700 MHz 700 - 870 MHz 870 - 1000 MHz dB dB dB 25 22 18 33 30 26 - Return Loss: Output - 5 - 40 MHz 40 - 1000 MHz dB dB 15 19 24 25 - Isolation (between outputs) - 5 - 500 MHz 500 - 1000 MHz dB dB 20 15 27 20 - Recommended Maximum Ratings 1,2 Parameter Value Max Input Power 1W DC current 240mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +100°C Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0027 2 Way 0º Power Divider 5-1000MHz Rev. V3 Typical Performance Curves: TA = 25°C, Z0 = 75Ω 1 Isolation Insertion Loss 0.0 0 -0.1 -5 -0.2 -10 -0.3 -15 dB dB -0.4 -0.5 -0.6 -20 -25 -0.7 -30 -0.8 -35 -0.9 -40 -1.0 5 204 403 602 801 5 1000 204 Frequency (MHz) 403 602 801 1000 801 1000 Frequency (MHz) Amplitude Unbalance Phase Unbalance 1.0 2.0 0.8 1.5 0.6 1.0 degrees 0.4 dB 0.2 0.0 -0.2 -0.4 0.5 0.0 -0.5 -1.0 -0.6 -0.8 -1.5 -1.0 -2.0 5 204 403 602 801 5 1000 204 Return Loss: Input 0 -5 -5 -10 -10 -15 -15 dB dB 602 Return Loss: Output 0 -20 -20 -25 -25 -30 -30 -35 -35 -40 -40 5 204 403 602 F re que nc y ( M H z) 3 403 F re que nc y ( M H z) F re que nc y ( M H z) 801 1000 5 204 403 602 801 F requenc y ( M H z) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. 1000 MAPDCT0027 2 Way 0º Power Divider 5-1000MHz Rev. V3 Tape Specification: Item Dimension Ao 6.70mm +/-0.1mm Bo 7.50mm +/-0.1mm Ko 3.60mm +/-0.1mm W 16.00mm +/-0.3mm P1 12.00mm +/-0.1mm Ordering Information 4 Part Number Package MAPDCT0027TR 900 piece reel ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.