SW-255-PIN GaAs SP4T Switch, 5 - 2000 MHz Rev. V4 Features • • • • • • Functional Block Diagram Low Insertion Loss, 1.0 dB Typical Fast Switching Speed, 20 nS Typical Ultra Low DC Power Consumption, 0.3 mA Typical Integral TTL Driver 50 Ohm Nominal Impedance MIL-STD-883 screening available Ordering Information Part Number Package SW-255-PIN DI-5 Note: Reference Application Note M513 for reel size information. Note: Die quantity varies. Truth Table Control Input Condition of Switch “1” = Logic High RF Common to Each RF Port CTL 1 CTL 2 CTL 3 CTL 4 RF1 RF2 RF3 RF4 1 0 0 0 ON OFF OFF OFF 0 1 0 0 OFF ON OFF OFF 0 0 1 0 OFF OFF ON OFF 0 0 0 1 OFF OFF OFF ON * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SW-255-PIN GaAs SP4T Switch, 5 - 2000 MHz Rev. V4 Electrical Specifications: TA = -55°C to +85°C 1 Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss — 5 - 2000 MHz 5 - 1000 MHz 5 - 500 MHz dB dB dB 2.1 1.6 1.4 — — — — — — VSWR — 5 - 2000 MHz 5 - 1000 MHz 5 - 500 MHz Ratio Ratio Ratio — — — — — — 2.3:1 1.8:1 1.4:1 Isolation — 5 - 2000 MHz 5 - 1000 MHz 5 - 500 MHz dB dB dB 35 36 42 — — — — — — Trise, Tfall Ton, Toff Transients 50% CTL to 90/10% RF In-band — — — nS nS mV — — — 7 20 80 — — — 1 dB Compression Input Power 500 - 2000 MHz 50 MHz dBm dBm — — +27 +21 — — IP2 For two tone input power up to +13 dBm 500 - 2000 MHz 50 MHz dBm dBm — — +68 +60 — — Bias Power +5 VDC @ 0.30 mA Typ — mA — — 1 1. All specifications apply when operated with bias voltages of +5 VDC and 50 ohm impedance at all RF Ports. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SW-255-PIN GaAs SP4T Switch, 5 - 2000 MHz Rev. V4 Typical Performance Curves Insertion Loss Isolation + 8 5 °C + 2 5 °C - 55 °C 2.0 70 Isolation (dB) Insertion Loss (dB) 80 1.5 1.0 0.5 60 50 40 30 0.0 0.005 0.50 1.00 1.50 2.00 20 0.005 1.00 1.50 2.00 Schematic VSWR VSWR 0.50 F re que nc y ( G H z) F re que nc y ( G H z) RF4 RF3 2.0 GND CTL4 1.8 GND CTL3 RF Common CTL2 GND CTL1 GND +VDC 1.6 1.4 1.2 1.0 0.005 0.50 1.00 F re que nc y ( GH z) 1.50 2.00 GND NC RF1 RF2 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.