SW-112-PIN SPDT RF Switch, 20 - 2000 MHz Rev. V3 Features • • • • • • Functional Block Diagram Ultra Broadband High Isolation: 70 dB Typical Integral TTL Driver Hermetic Package 50 Ohm Nominal Impedance MIL-STD-883 Screening Available Description Ordering Information Truth Table Part Number Package SW-112-PIN DI-1 TTL Control Input “1” = TTL Logic High Note: Reference Application Note M513 for reel size information. Note: Die quantity varies. Condition of Switch RF Common to Each RF Port RF1 RF2 0 On Off 1 Off On * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SW-112-PIN SPDT RF Switch, 20 - 2000 MHz Rev. V3 Electrical Specifications: TA = -55°C to +85°C 1 Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss — 20 - 2000 MHz 20 - 1000 MHz 20 - 500 MHz dB dB dB — — — — — — 2.2 2.0 1.8 VSWR — 20 - 2000 MHz 20 - 1000 MHz Ratio Ratio — — — — 1.5:1 1.2:1 Isolation — 20 - 2000 MHz 20 - 1000 MHz 20 - 500 MHz dB dB dB 50 60 70 — — — — — — µS µS mV — — — 2.0 1.0 40 — — — Ton Toff Transients In-band — — — 1 dB Compression Input Power — dBm — 13 — IP2 For two tone input power up to +5 dBm — dBm — +60 — IP3 For two tone input power up to +5 dBm — dBm — +30 — Bias Power +9 to +15 VDC @ 35 mA Max -5 VDC ± 5% @ 35 mA Max — mW — 500 — 1. All specifications apply when operated with bias voltages of +12 VDC and –5 VDC (± 5%) and 50 ohm impedance at all RF ports. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. SW-112-PIN SPDT RF Switch, 20 - 2000 MHz Rev. V3 Typical Performance Curves Insertion Loss Isolation +8 5°C +2 5°C 100 - 55°C 80 Isolation (dB) Insertion Loss (dB) 3.0 2.0 1.0 60 40 20 2 0.0 2 5 10 50 100 500 1000 2000 1000 2000 5 10 50 100 500 1000 2000 F requency (M H z) F re que nc y ( M H z) VSWR 1.8 VSWR 1.6 1.4 1.2 1.0 2 5 10 50 100 500 Frequency (M Hz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.