RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASW-008075 V1 Features • • • • • • • Functional Schematic Low Insertion Loss: 0.4 dB @ 2.4 GHz Moderate Isolation: 25 dB @ 2.4 GHz Low Power Consumption: 5 μA @ +3.0 V Lead-Free SC-70 (SOT-363) Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible C = 39 pF V1 RFC V2 RF1 GND RF2 Description M/A-COM’s MASW-008075 is a GaAs PHEMT MMIC SPDT switch in a lead-free SC-70 (SOT-363) surface mount plastic package. The MASW-008075 is ideally suited for applications where very small size and low cost are required. Pin 1 Typical applications are transmit / receive (Tx / Rx) switching in linear systems such as WLAN 802.11b/g. Other applications include 1.9 GHz and 2.4 GHz DECT and linear systems operating up to 3.0 GHz. The MASW-008075 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. C = 39 pF Pin Configuration Pin No. Pin Name Description 1 RF1 RF Port 1 2 GND Ground 3 RF2 RF Port 2 4 V2 Control 2 5 RFC RF Input 6 V1 Control 1 Ordering Information 1 Part Number Package MASW-008075-000000 Bulk packaging MASW-008075-TR3000 3000 piece reel MASW-008075-001SMB Sample Board 1. Reference Application Note M513 for reel size information. C = 39 pF Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power (0.5 - 3.0 GHz) 3 V Control +30 dBm Voltage -8.5 V < Vc < +8.5 V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASW-008075 V1 Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 50 Ω 4 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss5 1.0 GHz 2.4 GHz dB dB — — 0.3 0.4 — 0.5 Isolation 1.0 GHz 2.4 GHz dB dB — 23 23 25 — — VSWR 0.05 - 3.0 GHz Ratio — 1.2:1 — IIP2 Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz dBm — 80 — IIP3 Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz dBm — 48 — Input P1dB — dBm — 28 — Trise, Tfall 10% to 90% RF and 90% to 10% RF nS — 35 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF nS — 40 — Transients — mV — 10 — Current VC = 3.0 V µA — 5 10 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz – 1.0 GHz, 39 pF for 0.5 - 3.0 GHz. Truth Table 6,7 Lead-Free SC-70 (SOT-363)† Control V1 Control V2 RFC-RF1 RFC-RF2 0 1 On Off 1 0 Off On 6. Differential voltage, V (state 1) - V (state 0), must be +2.3 V minimum and must not exceed 8.5 V. 7. 0 = 0 V ± 0.2 V, 1 = +2.5 V to 5.0 V Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASW-008075 V1 Typical Performance Curves Insertion Loss Isolation 0.0 0 -0.1 -5 -10 -0.2 -15 -0.3 -20 -0.4 -25 -0.5 -30 -0.6 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) -35 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Return Loss 0 -5 -10 -15 -20 -25 -30 -35 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.