PJT36VC TRIPLE COMMON CATHODE TRANSIENT VOLTAGE SUPPRESSOR ARRAY DRAFT SPEC This Transient Voltage Suppressor is intended to Protect Sensitive Equipment against Electrostatic Discharge and Transient Events featuring low clamping voltage and low leakage current suitable forcommunication transmission line ports protection, used in Industrial, Consumer, Computing and Networking Applications. SPECIFICATION FEATURES 3 Working Peak Reverse Voltage of 36V Max Power Dissipation of 350W, 8/20µs Maximum Leakage Current of 1µA IEC61000-4-2 Compliance 15kV Air, 8kV Contact Discharge Max capacitance 200pF at 0Vdc 1MHz SOT143 Package 100% Tin Matte lead finish (RoHS Compliant) 4 2 1 APPLICATIONS Industrial Control Communication Port Portable Consumer Electronics Instrumentation Equipment SOT143 MAXIMUM RATINGS Symbol Value Units Ppp 350 W V ESD >25 kV Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range Tstg -55 to +150 °C Lead Soldering Temperature (max 10 s) TL 260 °C Rating Peak Pulse Power 8/20µs Waveform ESD Voltage (HBM) ELECTRICAL CHARACTERISTICS Tj = 25°C Parameter Reverse Stand-Off Voltage Conditions Symbol Min VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 36V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Typical Max Units 36 V 40 V 1 µA I pp = 1A 48 V Vc I pp = 5A 65 V Maximum Peak Pulse Current I pp 8/20 µs Waveform 6 A Off State Junction Capacitance Cj 120 pF 7/27/2006 0 Vdc Bias f = 1MHz Between pins 2,3,4 and 1 Page 1 www.panjit.com PJT36VC TYPICAL CHARACTERISTIC CURVES 110 16 100 90 14 80 Percent of Ipp Ipp, Amps 18 12 10 8 6 4 50% of Ipp @ 20µs 70 60 50 40 30 Rise time 10-90% - 8µs 20 10 2 0 0 6 8 10 12 14 16 18 20 22 24 0 5 10 Clamping Voltage, V 15 time, µsec 20 25 30 125 150 Pow er Derating Curve Non-Re petitive Pe a k Pulse Pow e r vs Pulse Time 110 10 % of Rated Power or Ipp 100 Peak Pulse Power - Ppp (kW) DRAFT SPEC Pulse Waveform Clamping Voltage vs Ipp 8x20µsec 1 0.1 90 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 100 1000 7/27/2006 0 25 50 75 100 Ambient Temperature - TA, °C Pulse Dura tion, µse c Page 2 www.panjit.com PJT36VC PACKAGE AND SUGGESTED PAD LAYOUT DIMENSIONS DRAFT SPEC © Copyright PanJit International, Inc 2006 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. 7/27/2006 Page 3 www.panjit.com