PJUSB208-PJUSB208R Low Capacitance Diode Array This diode array is configured to protect up to four data transmission lines acting as a line terminator, minimizing overshoot and undershoot conditions due to bus impedance as well as protect against over-voltage events as electrostatic discharges. SOT23-6L SPECIFICATION FEATURES Maximum Capacitance of 3.0pF at 0Vdc 1MHz Line-to-Ground Peak Inverse voltage of 40V per diode Maximum Leakage Current of 1.0µA @ VR I/O2 1 6 I/O3 REF2 2 5 REF1 I/O1 3 4 I/O4 Industry Standard SMT Package SOT23-6L IEC61000-4-2 (Level 4) +/-8kV (Contact) +/-15kV (Air) 100% Tin Matte finish (LEAD-FREE PRODUCT) PJUSB208 Two pin 1 orientations available I/O3 1 6 I/O2 REF1 2 5 REF2 I/O4 3 4 I/O1 APPLICATIONS USB 2.0 and Firewire Port Protection LAN/WLAN Access Point terminals Video Signal line protection PJUSB208R TVS Marking Code PJSUB208 208 PJUSB208R 316 MAXIMUM RATINGS Tj = 25°C Unless otherwise noted Rating Symbol Value Units Repetitive Peak Inverse Voltage V RRM 40 V Continuous Reverse Voltage VR 40 V Peak Pulse Current (8/20µs Waveform) I PP 24 A Average Rectified Forward Current, Per Diode I F(AV) 50 mA Power Dissipation, Tj = 85°C, IF = 200mA, Per Diode PD 100 mW Operating Junction Temperature Range Tj -55 to +150 °C Storage Temperature Range Tstg -55 to +150 °C Soldering Temperature, t max = 10 s TL 260 °C 6/19/2006 Page 1 www.panjit.com PJUSB208 ELECTRICAL CHARACTERISTICS Parameter Tj = 25°C unless otherwise noted Conditions Symbol Repetitive Peak Inverse Voltage V RRM Breakdown Voltage V BR Forward Voltage (8/20µs Pulse) VF I BR = 10µA IR Reverse Leakage Current Off-State Junction Capacitance Min Typ 40 V V I PP = 1A 2.0 V I PP = 10A 5.0 V V R = 40V 1.0 µA 3.0 pF 0Vdc Bias, f =1 MHz Between I/O pins and REF2 (Ground) CJ 8/20µs Surge Pulse Waveform pF 2.0 Forward Voltage vs Ipp 8/20µs Surge 25 20 50% of Ipp @ 20µs Ipp, Amps Percent of Ipp Units 50 0Vdc Bias, f =1 MHz Between I/O pins 110 100 90 80 70 60 50 40 30 20 10 0 Max 15 10 5 Rise time 10-90% - 8µs 0 0 5 10 15 20 25 30 time, µsec 6/19/2006 1 2 3 4 5 6 7 8 9 10 11 12 Forward Voltage, V Page 2 www.panjit.com PJUSB208 PACKAGE DIMENSIONS AND SUGGESTED PAD LAYOUT © Copyright PanJit International, Inc 2006 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. 6/19/2006 Page 3 www.panjit.com