PJDLC05~PJDLC24 VOLTAGE 5 to 24 Volts POWER 400 Watts SOT- 23 Unit: inch (mm) .103(2.60) .056(1.40) .047(1.20) .119(3.00) .110(2.80) FEATURES .086(2.20) This transient overvoltage suppressor is intended to prodect sensitive equipment againset electrostatic discharge events as well to offer a minmum lnsertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applicatons. This dual transient voltage suppressor comes in a single SOT-23, offering borard space reduction, where the application requires it. .007(.20)MIN ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES • Improved leakage current, maximum of 5 µA @ 5Vdc .083(2.10) .066(1.70) • Maximum capacitance @ 0 Vdc Bias of 1.2 pF between terminals 1-3 or terminals 2-3 .006(.15) .002(.05) • IEC61000-4-2 esd 15kV Air, 8kV contact compliance .044(1.10) • Pb free product are available : 99% Sn above can meet RoHS .006(.15)MAX environment substance directive request .020(.50) .013(.35) .035(0.90) • IEC61000-4-5 lightning 17 Amps peak, 8x20 usec waveform MECHANICALDATA Case: SOT-23, plastic Terminals: solderable per MIL-STD-750, Method 2026 Appox. Weight : 8mg 3 Marking : PJDLC05 : T2S PJDLC12 : DJ2 PJDLC15 : DJ5 PJDLC24 : DJ4 1 2 MAXIMUM RATINGS P JD L C 0 5 Parameter Symbol C ondi ti ons Mi ni mum Typi cal Maxi mum Uni ts 5 V Reverse Stand-Off Voltage VRwM Reverse Breakdown Voltage V BR I t=1mA Reverse Leakage C urrent IR VRwM = 5V, T = 25OC 20 µΑ C lampi ng Voltage VC IPP = 1A t p = 8/20 µS 9.8 A C lampi ng Voltage VC IPP = 5A t p = 8/20 µS 11 V Peak Pulse C urrent IPP t p = 8/20 µS 17 A Juncti on C apaci tance CJ Pi n 1 to 2 VR = 0V, f = 1MHZ 5 pF REV.0-MAR.18.2005 6 V PAGE . 1 PJDLC05~PJDLC24 P JD L C 1 2 Parameter Symbol Conditions Minimum Typical Maximum Units 12 V Reverse Stand-Off Voltage VRwM Reverse Breakdown Voltage V BR I t=1mA Reverse Leakage Current IR VRwM = 5V, T = 25OC 1 µΑ Clamping Voltage VC IPP = 1A t p = 8/20 µS 19 A Clamping Voltage VC IPP = 5A t p = 8/20 µS 24 V Peak Pulse Current IPP t p = 8/20 µS 12 A Junction Capacitance CJ Pin 1 to 2 VR = 0V, f = 1MHZ 5 pF Symbol Conditions Maximum Units 24 V 13.3 V P JD L C 1 5 Parameter Minimum Typical Reverse Stand-Off Voltage VRwM Reverse Breakdown Voltage V BR I t=1mA Reverse Leakage Current IR VRwM = 5V, T = 25OC 1 µΑ Clamping Voltage VC IPP = 1A t p = 8/20 µS 43 A Clamping Voltage VC IPP = 5A t p = 8/20 µS 55 V Peak Pulse Current IPP t p = 8/20 µS 5 A Junction Capacitance CJ Pin 1 to 2 VR = 0V, f = 1MHZ 5 pF 26.7 V P JD L C 2 4 Parameter Symbol Conditions Minimum Typical Maximum Units 24 V Reverse Stand-Off Voltage VRwM Reverse Breakdown Voltage V BR I t=1mA Reverse Leakage Current IR VRwM = 5V, T = 25OC 1 µΑ Clamping Voltage VC IPP = 1A t p = 8/20 µS 43 A Clamping Voltage VC IPP = 5A t p = 8/20 µS 55 V Peak Pulse Current IPP t p = 8/20 µS 5 A Junction Capacitance CJ Pin 1 to 2 VR = 0V, f = 1MHZ 5 pF REV.0-MAR.18.2005 26.7 V PAGE . 2 18 110 16 100 90 14 80 12 Percent of Ipp 8x20 m sec Peak Current, Amps RATING AND CHARACTERISTIC CURVES 10 8 6 60 50 40 30 4 20 2 0 50% of Ipp @ 20 m s 70 Rise time 10-90% - 8 m s 10 6 8 10 12 16 14 18 20 22 0 24 0 5 10 15 20 25 30 100 125 150 time, m sec Clamping Voltage, Volts Clamping Voltage vs Ipp 8x20msec Pulse Waveform 110 10 % of Rated Power or Ipp Peak Pulse Power, kW 100 1 0.1 90 80 70 60 50 40 30 20 10 0.01 0.1 1 10 100 Pulse Duration, m sec Non-Repetitive Peak Pulse Power vs Pulse Time REV.0-MAR.18.2005 1000 0 0 25 50 75 Ambient Temperature - TA, OC Power Derating Curve PAGE . 3 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7" plastic Reel LEGAL STATEMENT IMPORTANT NOTICE This information is intended to unambiguously characterize the product in order to facilitate the customer's evaluation of the device in the application. The information will help the customer's technical experts determine that the device is compatible and interchangeable with similar devices made by other vendors. The information in this data sheet is believed to be reliable and accurate. The specifications and information herein are subject to change without notice. New products and improvements in products and product characterization are constantly in process. Therefore, the factory should be consulted for the most recent information and for any special characteristics not described or specified. Copyright Pan Jit International Inc. 2003 All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract. The information presented is believed to be accurate and reliable, and may change without notice in advance. No liability will be accepted by the publisher for any consequence of use.Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. REV.0-MAR.18.2005 PAGE . 4