PJDLC03~PJDLC24 3.3 to 24 Volts POWER 400 Watts ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES 0.006(0.15)MIN. VOLTAGE 0.120(3.04) This transient overvoltage suppressor is intended to prodect sensitive equipment againset electrostatic discharge events as well to offer a minmum lnsertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applicatons. This dual transient voltage suppressor comes in a single SOT-23, offering borard space reduction, where the application requires it. 0.110(2.80) FEATURES 0.056(1.40) 0.047(1.20) • Maximum capacitance @ 0 Vdc Bias of 1.2 pF between terminals 1-3 or terminals 2-3 • IEC61000-4-2 esd 15kV Air, 8kV contact compliance 0.079(2.00) 0.008(0.20) 0.070(1.80) 0.003(0.08) • In compliance with EU RoHS 2002/95/EC directives 0.044(1.10) 0.004(0.10)MAX. MECHANICALDATA 0.035(0.90) • Case: SOT-23, plastic 0.020(0.50) • Terminals: solderable per MIL-STD-750, Method 2026 0.013(0.35) • Apporx. Weight: 0.0003 ounce, 0.0084 gram Fig.21 MAXIMUM RATINGS Parameter Op e r a ti ng J unc ti o n S to ra g e Te m p e ra tur e Ra ng e Symbol Value TJ -55 to +125 O -55 to +150 O T S TG Units C C ELECTRICAL CHARACTERISTICS PJDLC03 Marking DL3 Parameter Symbol Conditions Min. Typ. Max. Units VRWM - - - 3.3 V Reverse Breakdown Voltage VBR I T=1mA 4 - - V Reverse Leakage Current IR VRWM = 3.3V, T = 25OC - - 50 μA Clamping Voltage VC I PP = 1A t p = 8/20 μs - - 6.5 V Clamping Voltage VC I PP = 5A t p = 8/20 μs - - 8 V Junction Capacitance CJ Between pin1.2 to 3 V R=0V,f=1MHz - - 1.2 pF Reverse Stand-Off Voltage October 12,2010-REV.00 PAGE . 1 PJDLC03~PJDLC24 PJDLC05 Makring T2S Parameter Symbol Conditions Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM - - - 5 V Reverse Breakdown Voltage VBR I T=1mA 6 - - V Reverse Leakage Current IR VRWM = 5V, T = 25OC - - 20 μA Clamping Voltage VC I PP = 1A t p = 8/20 μs - - 9.8 V Clamping Voltage VC I PP = 5A t p = 8/20 μs - - 11 V Junction Capacitance CJ Between pin1.2 to 3 VR=0V,f=1MHz - - 0.65 pF Symbol Conditions Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM - - - 12 V Reverse Breakdown Voltage VBR I T=1mA 13.3 - - V Reverse Leakage Current IR VRWM = 12V, T = 25OC - - 1 μA Clamping Voltage VC I PP = 1A t p = 8/20 μs - - 19 V Clamping Voltage VC I PP = 5A t p = 8/20 μs - - 24 V Junction Capacitance CJ Between pin1.2 to 3 VR=0V,f=1MHz - - 1.2 pF Symbol Conditions Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM - - - 15 V Reverse Breakdown Voltage VBR I T=1mA 16.7 - - V Reverse Leakage Current IR VRWM = 15V, T = 25OC - - 1 μA Clamping Voltage VC I PP = 1A t p = 8/20 μs - - 24 V Clamping Voltage VC I PP = 5A t p = 8/20 μs - - 30 V Junction Capacitance CJ Between pin1.2 to 3 VR=0V,f=1MHz - - 1.2 pF PJDLC12 Makring DJ2 Parameter PJDLC15 Makring DJ5 Parameter October 12,2010-REV.00 PAGE . 2 PJDLC03~PJDLC24 PJDLC24 Marking DJ4 Parameter Symbol Conditions Min. Typ. Max. Units VRWM - - - 24 V VBR I T=1mA 26.7 - - V Reverse Leakage Current IR VRWM = 24V, T = 25OC - - 1 μA Clamping Voltage VC I PP = 1A t p = 8/20 μs - - 43 V Clamping Voltage VC I PP = 5A t p = 8/20 μs - - 55 V Junction Capacitance CJ Between Pin 1.2 to 3 V R = 0V, f = 1MHz - - 1.2 pF Reverse Stand-Off Voltage Reverse Breakdown Voltage October 12,2010-REV.00 PAGE . 3 PJDLC03~PJDLC24 MOUNTING PAD LAYOUT SOT-23 ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2010 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. October 12,2010-REV.00 PAGE . 4