PM5369 TUPP 9953 Released Tributary Unit Payload Processor for 9953 Mbit/s FEATURES • Configurable, multi-channel payload processor for aligning SONET virtual tributaries (VTs) or SDH tributary units (TUs) in an STS-192/STM-64 or STS-48/STM-16 data stream. • Supports High Order (STS/AU) pointer processing, payload processing, and path termination/monitoring. • Supports Low Order (VT/TU) pointer processing, payload processing, and path monitoring. • On the line side, provides working Serial Receive and Transmit ESSI (Extended SONET Serial Interface) CML links. Links are configurable as: • 4xSTS-48/STM-16 2488.32 Mbit/s SONET/SDH framed interfaces; or • 4xSTS-12/STM-4 622.08 Mbit/s SONET/SDH framed interfaces. • On the system side, provides working Add and Drop Serial ESSI links. Links are configurable as: • 4xSTS-48/STM-16 2488.32 Mbit/s SONET/SDH framed interfaces; or • 4xSTS-12/STM-4 622.08 Mbit/s SONET/SDH framed interfaces. • Independently configurable (2488.32 Mbit/s or 622.08 Mbit/s) Line and System Interfaces. • Provides a set of Ingress and Egress shared protection links. • Provides a per-link Space switch on egress interfaces. • Provides a steady-state latency of: • 21 µs from line Receive to system DROP for VT1.5. • 2.5 µs from system ADD to line TX. • Provides hardware based Message Assisted Protection Switching (MAPS) support to work with a centralized fabric (e.g. PM5370 WSE 40). • Supports independent Line Receive and System Drop transport frame alignment for high-order traffic. • Supports independent transport, highorder payload and tributary multi-frame alignments for low-order traffic. • Supports independent Line Transmit and System Add transport frame alignments. • On the receive path, provides optional SDH payload conversion of: • AU4/VC4/TUG3/TU3/VC3/C3 to AU3/VC3/C3; or • AU3/VC3/C3 to AU4/VC4/TUG3/TU3/VC3/C3; or • AU4/VC4/TUG3/TUG2 to AU3/VC3/TUG2; or • AU3/VC3/TUG2 to AU4/VC4/TUG3/TUG2. • On the transmit path, provides optional SDH payload conversion of: • AU3/VC3/C3 to AU4/VC4/TUG3/TU3/VC3/C3; or • AU4/VC4/TUG3/TUG2 to AU3/VC3/TUG2; or • AU3/VC3/TUG2 to AU4/VC4/TUG3/TUG2. • Allows for low order (VT/TU) processing bypass. • Supports high-order ESSI transport overhead transparency. • Supports line and system diagnostic and facility loopbacks. • Provides optional PRBS generation and monitoring features for ESSI offline link verification. • Provides a generic 16-bit microprocessor bus interface for configuration, control, and status monitoring. • Provides a standard 5-signal IEEE 1149.1 JTAG test port for boundary scan test purposes. • Implemented in a 1.2 V core and 2.5 V I/O 0.13µm CMOS technology. Inputs are 3.3 V tolerant. • Packaged in a 672-ball FCBGA top-hat, 27 mm x 27 mm. BLOCK DIAGRAM Line Side System Side Low Order Processor (LOPP) CML ESSI Serial Line Receive Interface 4 x 2.5 Gbit/s or 4 x 622 Mbit/s Shared Ingress Protect CML ESSI Serial Line Transmit Interface 4 x 2.5 Gbit/s or 4 x 622 Mbit/s Shared Egress Protect PMC-2020003 (R5) Receive ESSI Interface Receive ESSI Interface Rx High Order Processor (HOPP) REI-P, (E)RDI-P Perf. Mon/ MAPS Pointer Interpreter and VT/TU Aligner Transmit ESSI Interface CML ESSI Serial System Drop Interface 4 x 2.5 Gbit/s or 4 x 622 Mbit/s Transmit ESSI Interface Shared Egress Protect Receive ESSI Interface CML ESSI Serial System Add Interface 4 x 2.5 Gbit/s or 4 x 622 Mbit/s Receive ESSI Interface Shared Ingress Protect STS/AU Aligner Bypass Path Transmit ESSI Interface Transmit ESSI Interface Tx High Order Processor (HOPP) PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE © Copyright PMC-Sierra, Inc. 2004 Released PM5369 TUPP 9953 Tributary Unit Payload Processor for 9953 Mbit/s APPLICATIONS • Power when full bandwidth is used (OC-192/STM-64 applications using 2.488 Mbit/s links) is 6.91 W typical. • Power when 1/4 bandwidth is used (OC-48/STM-16 applications using 622 Mbit/s links) is 2.64 W typical. . • • • • • • • SONET/SDH Add-Drop Multiplexer (ADM). SONET/SDH Digital Cross-connect (DCC). Multi-service Provisioning Platforms (MSPP). Multi-service ADM (MS-ADM). Multi-Service Switch. Optical Access Mux. Terminal Multiplexers. TYPICAL APPLICATIONS OC-192/STM-64 OPTICAL CROSS-CONNECT WITH 40G VT/TU CROSS-CONNECT SERVER CARD SFI-4 OC-192/STM-64 10 G Optical Transponder 8xOC-48/STM-16 PM5324 ARROW 1x192 Framer SFI-4 PM5395 CRSU 4x2488 W orking SFI-4 OC-192/STM-64 10 G Optical Transponder PM5326 ARROW 2x192 Framer PM5377 TSE 240 APS PM5324 ARROW 1x192 Framer W orking Protect PM5395 CRSU 4x2488 Protect PM5369 PM5369 PM5369 TUPP 9953 PM5369 TUPP 9953 TUPP 9953 TUPP 9953 PM5370 W SE 40 Server Card OC-48/STM-16 VT/TU ADM / CROSS-CONNECT SFI-4 4 x OC-48/STM-16 PM5395 CRSU 4x2488 PM5324 ARROW 1x192 Framer PM5324 ARROW 1x192 Framer PM5395 CRSU 4x2488 w PM5369 TUPP 9953p Serial PM5370 WSE 40 (Working) PM5369 w TUPP 9953 p 4 x OC-48/STM-16 PM5370 WSE 40 (Protect) 24x10/100BaseT PM5329 ARROW 24xFE Serial 10/100 PHY Head Office: PMC-Sierra, Inc. 8555 Baxter Place Burnaby, B.C. V5A 4V7 Canada Tel: +1.604.415.6000 Fax: +1.604.415.6200 To order documentation, send email to: [email protected] or contact the head office, Attn: Document Coordinator All product documentation is available on our web site at: http://www.pmc-sierra.com For corporate information, send email to: [email protected] PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE PMC-2020003 (R5) © Copyright PMC-Sierra, Inc. 2004. All rights reserved. For a complete list of PMC-Sierra’s trademarks and registered trademarks, visit: http://www.pmc-sierra.com/legal