PM8311 TEMUX 168 High Density T1/E1 Framer, VT/TU Mapper & M13 Mux with Integrated SONET/SDH Framers Preliminary Product Brief PRODUCT OVERVIEW • Meets timing requirements for wireless backhaul, critical for CES- The PM8311 TEMUX 168 is a single device integrating 2xOC-3/STM-1 SONET/SDH framers for working and protect links, 168/126 T1/E1 framers, 6 DS3/E3 framers, 6 M13/G.747 multiplexers and 6 VT/TU mappers. • Extended Serial SONET/SDH Interface (ESSI) can aggregate up to based PWE3 applications, by enabling independent timing for all 168/128 T1/E1s across the SBI using the V4 byte 2xOC-3/STM-1 on a single 4-wire interface, enabling equipment protection in ACTA/AMC systems. Designed for lower-density applications than its PM8310 TEMUX 336 counterpart, the TEMUX 168 device also interfaces seamlessly with a broad range of PMC-Sierra solutions. The TEMUX 168 includes the Extended Serial SONET/SDH interface (ESSI), enabling: • Supports linear 1+1 protection on the same device or to a companion TEMUX 168 • Enables a scalable architecture from T1/E1 up to OC-12/STM4 • Supports T1/E1 mapping directly into SONET/SDH using V1.5/TU-11 • A low pin-count interconnect to additional TEMUX 168 devices or VT2/TU-12 or multiplexed DS3s using M13 or G.747 • SONET/SDH cross-connects in transport applications • Supports advanced test features including programmable pattern generation and detection for up to 64 byte sequences • Ethernet over SONET/SDH mappers such as the PMC-Sierra PM4390 ARROW M8xFE • Fully integrated, monolithic IC ensures reliability The device also includes the SBI bus, which enables simple interconnects with PMC-Sierra Layer 2 solutions. PRODUCT HIGHLIGHTS The TEMUX 168 is fully hardware and software compatible with the TEMUX 336. • 4 OC-3/STM-1 SONET/SDH framers • 168 T1/126 E1 framers • 6 M13 multiplexers, including support for G.747 multiplexing BENEFITS • 6 DS3/E3 framers • Complete SONET/SDH front end with T1/E1, DS3/E3 • High order path processor for a SONET STS-3 or an SDH STM-1 framers/mappers/multiplexers on a single-chip that meets ATCA/AMC space and power constraints. • Tributary path processor for 168 VT1.5/TU-11s or 126 VT2/TU-12s • Byte synchronous and bit asynchronous mapper for 168 VT1.5/TU- • Integrated SBI bus simplifies interconnection to layer 2 processors 11s or 126 VT2/TU-12s • Tributary path processor for 6 TU-3s • Mapper for 6 DS3s or 6 E3s (TU-3 and AU-3) BLOCK DIAGRAM to DS3/E3 LIU OC-3 OC-3 SONET/SDH Transmitter (w+p) 622M ESSI Tx ESSI (w+p) 622M ESSI Rx ESSI (w+p) OC-3 OC-3 STS-1 Switch HO/LO Pointer Processor DS3 Tran M13 Mux DS3 Frmr M13 DMux T1/E1 Tran SONET/ SDH Mapper SONET/SDH Framer (w+p) to DS3/E3 LIU PMC-2060577, Issue 1 © Copyright PMC-Sierra, Inc. 2006 All rights reserved. Proprietary and Confidential to PMC-Sierra, Inc. and for its customers’ internal use. T1/E1 Frmr Tx System Interface (SBI, SBI-TR, H-MVIP) Rx System Interface (SBI, SBI-TR, H-MVIP) SBI, SBI-TR or 32M H-MVIP SBI, SBI-TR or 32M H-MVIP PM8311 TEMUX 168 High Density T1/E1 Framer, VT/TU Mapper & M13 Mux with Integrated SONET/SDH Framers APPLICATIONS INTERFACES • Up to 4 SONET/SDH network interfaces • ATCA/AMC-based line cards • SONET/SDH Transport and Path overhead interface • Two 622-Mbit/s Extended Serial SONET/SDH Interfaces (ESSIs) • Line-side serial interface for up to 6 DS3s or E3s • Voice and media gateways • Wireless base station controllers (BSC) and radio network controllers (RNC) • System-side Scalable Bandwidth Interconnect (SBI) bus for high density interconnection of up to 168 T1 streams, 126 E1 streams, 6 DS3 streams, 6 E3 streams, or 6 arbitrary rate streams • System-side serial interface for up to 6 DS3s or E3s • Routers and multi-service switches • Edge aggregation switches • Multi-service provisioning platforms • Flexible bandwidth interface for up to 6 arbitrary rate ports TRANSPORT EQUIPMENT ADM, MSPP & PACKET ADMS • 32 Mbit/s Synchronous TDM Interface (based on H-MVIP) • Microprocessor- and IEEE 1149.1-compliant JTAG interface Client Services Termination Card PACKAGE • 896-pin FCBGA (31 x 31 mm) 10/100/ 1000 Ethernet • Supports industrial temperature range (-40 ºC to 85 °C) Ethernet PHY Network Processor Network Processor I/F FPGA PM8311 TEMUX 168 SBI ROUTER/MULTI-SERVICE SWITCH ESSI to Switch Fabric(working) ESSI to Switch Fabric(protect) WIRELESS CARD ML-PPP/ML-FR-enabled Line Card Network Processor-based WAN Line Card 1x or 2x OC-3/ STM-1 SFP Optics PM8311 TEMUX 168 SBI PM7305 FREEDM 336LE Packet Switch Interface Packet Fabric NxOC-3/ STM-1 or OC-12/ STM-4 SFP Optics PM8311 TEMUX 168 SBI Network Processor I/F FPGA Network Processor Switch Fabric NEXT-GENERATION VOICE FURTHER RESOURCES Channelized TDM Line Card Up to 6x T3/E3 T3/E3 LIU PM8311 TEMUX 168 SBI PM8611 SBS Lite WIRELINE EQUIPMENT SOLUTIONS TDM Fabric www.pmc-sierra.com/ethernet-sonet-sdh-mac-framer-controller-chips TECHNICAL DOCUMENTATION www.pmc-sierra.com/products/DocFind.html Corporate Head Office: PMC-Sierra, Inc. Mission Towers One 3975 Freedom Circle Santa Clara, CA, 95054, U.S.A. Tel: 1.408.239.8000 Fax: 1.408. 492.1157 Operations Head Office: PMC-Sierra, Inc. 100-2700 Production Way Burnaby, BC V5A 4X1 Canada Tel: 1.604.415.6000 Fax: 1.604.415.6200 PMC-2060577, Issue 1 © Copyright PMC-Sierra, Inc. 2006. All rights reserved. For a complete list of PMC-Sierra’s trademarks , visit www.pmc-sierra.com/legal/. Other product and company names mentioned herein may be the trademarks of their respective owners. For corporate information, send email to: [email protected]. All product documentation is available on our web site at: www.pmc-sierra.com.