HEAT SHRINK MEDIUM / HEAVY WALL TUBING - ADHESIVE LINED Qualtek Electronics Q5-3000 HEAT SHRINKABLE, ADHESIVE LINED TUBING SHRINK RATIO 3:1 Features/Applications Q5-3000 is manufactured by co-extrusion of polyolefin and meltable adhesive. Designed to provide both insulation and sealing for electronic components, wire splices and cable jackets. Operating temperature: -45°C to +125°C Minimum shrink temperature: 120°C Full recovery temperature: 120°C Meets: SAE-AMS-DTL-23053/4, UL 224 Standard color: Black RoHS Compliant Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 12 MPa (min.) Tensile Strength After Aging (136°C, 168 hrs.) ASTM D 2671 Remains 70% Elongation at Break ASTM D 2671 400% (min.) Elongation at Break After Aging (158°C, 168 hrs.) ASTM D 2671 >100% (min.) Longitudinal Shrinkage UL 224 0 to -10% Heat Shock 200°C, 4 hrs. No cracking, no dropping Cold Bend (-40°C, 1hr.) ASTM D 2671 No cracking Voltage Withstand ( AC 2500V, 60 seconds) ASTM D 2671 No breakdown Volume Resistance ASTM D 876 10 14 Ω.cm (min.) SAE-AMS-DTL-23053/4 Self extinguish in 30 sec. Flammability Copper Corrosion (158°C, 168 hrs.) ASTM D 2671 Meth. B Pass Water Absorption ASTM D 570 < 0.5% Fluid Resistance MIL-DTL-23053/4 Good Product Dimensions Standard Packaging After Recovered (mm) As Supplied (mm) Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (nom.) Adhesive Thickness (nom.) 3 3.0 1.0 1.00 0.5 Cut to Length Pcs. *(QB) Qty per bag 48” 5 6 6.0 2.0 1.00 0.5 5 9 9.0 3.0 1.35 0.6 5 12 12.0 4.0 1.50 0.7 5 18 18.0 6.0 1.70 0.8 5 24 24.0 8.0 1.95 1.0 5 39 39.0 13.0 2.10 1.0 5 52 52.0 13.0 2.50 1.0 5 Size (mm) Notes: 1. * See Part Number Guide for standard packaging codes. 2. Special sizes, packaging, colors and cut pieces are available upon request. ISO-9001 Company www.qualtekusa.com Q53000-200E