HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-3XM HEAVY DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Manufactured using a specially designed coating technology. Designed to provide both insulation and create a tight seal for protected articles. Suitable for joints and terminations, it can also be used to protect auto wires, shipping cables, bundled wires and metal tubes against water and moisture especially in ship building. Operating temperature: -55°C to +125°C Minimum shrink temperature: 80°C Full recovery Temperature: 110°C Standard color: Black RoHS Compliant Technical Data Test Method Typical Data Tensile Strength Property ASTM D 2671 >14 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 -10% ASTM D 2671 < 30% 250°C, 168 hrs. > 12 MPa > 350 % Heat Shock 300°C, 4 hrs. No Cracking Flammability VW-1 Pass Dielectric Strength IEC 93 > 20 kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 >1014 Ω.cm Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion ASTM E28 85°C + 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions As Supplied (mm) Size After Recovered (mm) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag 6” 48” Inch mm Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (min.) Adhesive Thickness (nom.) 3/4 19/6 19 6 3.0 1.35 14 5 1 25/8 25 8 3.0 1.35 12 5 1 1/4 33/8 33 8 3.0 1.35 5 5 1 1/2 40/12 40 12 3.0 1.35 5 5 2 55/16 55 16 3.0 1.35 3 5 2 1/2 65/19 65 19 3.0 1.35 2 5 3 75/22 75 22 3.0 1.35 2 5 3 3/8 85/25 85 25 3.0 1.35 1 5 4 100/30 100 30 3.0 1.35 1 5 Notes: 1. * See Part Number Guide for standard packaging codes.. 2. Cross Reference Guide available. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Halogen free heat-shrinkable adhesive-lined tubing is available upon request. www.Qualtekusa.com