SMD POWER INDUCTORS SDB1205 SERIES 1. PART NO. EXPRESSION : SDB12051R5YZF (a) (b) (c) (d)(e)(f) (a) Series code (d) Tolerance code : M = ±20%, Y = ±25% (b) Dimension code (e) X, Y, Z : Standard part (c) Inductance code : 1R5 = 1.5uH (f) F : Lead Free 2. CONFIGURATION & DIMENSIONS : B C E F I I D H 101 A G PCB Pattern Unit:m/m A B C D E F G H I 12.5±0.3 12.5±0.3 6.00 Max. 5.0±0.2 2.2±0.2 7.6±0.2 7.0 Ref. 5.4 Ref. 2.8 Ref. 3. SCHEMATIC : 4. MATERIALS : (a) Core : DR Ferrite Core a h d g (b) Core : SI Ferrite Core b (c) Base : LCP (d) Wire : Enamelled Copper Wire e (e) Tape : Mylar Tape (f) Terminal : Tinned Copper Plate f c (g) Adhesive : Epoxy (h) Ink : Bon Margue 5. GENERAL SPECIFICATION : a) Temp. rise : 40°C Max. b) Rated current : Base on temp. rise & ǻL/L0A = 20% Max. c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +80°C e) Resistance to solder heat : 260°C.10secs NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS SDB1205 SERIES 6. ELECTRICAL CHARACTERISTICS : Part No. Inductance ( µH ) Test Frequency ( Hz ) RDC ( mȍ ) Max. IDC (A) Max. SDB12051R5YZF 1.5±25% 1V / 100K 12 8.00 SDB12052R2YZF 2.2±25% 1V / 100K 14 7.00 SDB12053R1YZF 3.1±25% 1V / 100K 17 6.00 SDB12054R4YZF 4.4±25% 1V / 100K 20 5.00 SDB12055R2YZF 5.2±25% 1V / 100K 21 4.40 SDB12057R5YZF 7.5±25% 1V / 100K 24 4.20 SDB1205100MZF 10.0±20% 1V / 1K 25 4.00 SDB1205120MZF 12.0±20% 1V / 1K 27 3.50 SDB1205150MZF 15.0±20% 1V / 1K 30 3.30 SDB1205180MZF 18.0±20% 1V / 1K 34 3.00 SDB1205220MZF 22.0±20% 1V / 1K 36 2.80 SDB1205270MZF 27.0±20% 1V / 1K 51 2.30 SDB1205330MZF 33.0±20% 1V / 1K 57 2.10 SDB1205390MZF 39.0±20% 1V / 1K 68 2.00 SDB1205470MZF 47.0±20% 1V / 1K 75 1.80 SDB1205560MZF 56.0±20% 1V / 1K 110 1.70 SDB1205680MZF 68.0±20% 1V / 1K 120 1.50 SDB1205820MZF 82.0±20% 1V / 1K 140 1.40 SDB1205101MZF 100.0±20% 1V / 1K 160 1.30 SDB1205121MZF 120.0±20% 1V / 1K 170 1.10 SDB1205151MZF 150.0±20% 1V / 1K 230 1.00 SDB1205181MZF 180.0±20% 1V / 1K 290 0.90 SDB1205221MZF 220.0±20% 1V / 1K 400 0.80 SDB1205271MZF 270.0±20% 1V / 1K 460 0.75 SDB1205331MZF 330.0±20% 1V / 1K 510 0.68 SDB1205391MZF 390.0±20% 1V / 1K 690 0.65 SDB1205471MZF 470.0±20% 1V / 1K 770 0.58 SDB1205561MZF 560.0±20% 1V / 1K 860 0.54 SDB1205681MZF 680.0±20% 1V / 1K 1200 0.48 SDB1205821MZF 820.0±20% 1V / 1K 1340 0.43 SDB1205102MZF 1000.0±20% 1V / 1K 1530 0.40 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS SDB1205 SERIES 7. CHARACTERISTICS CURVES : @ TEMP. RISE VS. DC SUPERPOSITION RESPONSE CURVE 90 102M 331M 80 101M 100M 1R5Y 70 60 50 ǻt (°C) 40 30 20 10 0 0 1 2 3 4 5 6 7 8 9 10 11 DC CURRENT (A) @ INDUCTANCE VS. FREQUENCY RESPONSE CURVE @ INDUCTANCE VS. DC SUPERPOSITION RESPONSE CURVE 104 104 5 5 3 3 103 103 102M 331M 3 102 102 L (uH) 101M 5 101M 5 3 101 3 101 100M 5 3 100M 1R5Y 0 10 5 5 3 3 1R5Y 0 10 10-3 331M 3 5 L (uH) 102M 5 3 5 10-2 3 5 10-1 3 5 100 3 5 101 3 5 102 10-1 10-3 3 5 10-2 3 5 FREQUENCY(MHZ) 10-1 3 5 100 3 5 101 3 5 102 DC CURRENT (A) NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS SDB1205 SERIES RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS 10s max. 255°C Natural cooling 230°C 180°C 150°C Pre-heating 40s max. 90 to 120s 8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE N ØC B A 2.0±0.5 ØC D G EMBOSSED CARRIER * CARRIER TAPE WIDTH : D P:16 m/m 101 4 m/m 101 101 101 101 ( 2 ) DIMENSIONS Unit:m/m STYLE A B C D G 13-24 330 21±0.8 13±0.5 24 26 N +0 50 T -0 30.4 ( 3 ) Q'TY & G.W. PER PACKAGE INNER : REEL SERIES SDB1205 OUTER : CARTON Q'TY (PCS) G.W. (gw) STYLE Q'TY (PCS) G.W. (Kg) SIZE (cm) 600 1900 13-24 2400 11.1 40 x 40 x 24 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 SMD POWER INDUCTORS SDB1205 SERIES 9. RELIABILTY AND TEST CONDITION : TEST ITEM SOLDERABILITY SPECIFICATION TEST CONDITION MORE THAN 90% OF THE PREHEAT : 125±25°C FOR 60 SECONDS TERMINAL ELECTRODE SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SHALL BE COVERED SOLDER TEMP. : 245±5°C WITH FRESH SOLDER. FLUX : ROSIN DIP TIME : 4±1 SECONDS THERMAL SHOCK INDUCTANCE SHALL ROOM TEMP. -25±2°C TEST NOT CHANGE MORE 15 MINUTES 30 MINUTES THAN ±20% ( TEMP. CYCLE ) ROOM TEMP. 85±2°C 15 MINUTES 30 MINUTES TOTAL : 50 CYCLES HUMIDITY TEMPERATURE : 40±2°C RESISTANCE TEST HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS HIGH TEMP. TEMPERATURE : 85±2°C RESISTANCE TEST APPLIED CURRENT : PER SPEC. TIME : 500 HOURS NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 SMD POWER INDUCTORS SDB1205 SERIES 10. UL CARD : GUANGDONG CHINA BC Mtl Dsg Coating Type ANSI Type __ TC __ __ __ TI E54705 (M) RTI H D Min UL94 Elec Mech H H V 4 C A T 9 T Thk Flame with w/o W Mtl Dsg Col mm Class Imp Imp I I R 5 I Liquid crystal plyester (LCP), designated "EKONOL" or "SUMIKASUPER", furnished in the form of pellets, (Contd) E4008 , E400X E4008 NC , BK NC , WT , BK E4010 E400(Y)L , E4008L E4810 NC , BK NC , BK NC , BK 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 130 130 130 130 130 220 220 220 130 220 220 220 130 130 130 130 130 130 130 130 130 130 130 130 130 180 200 200 130 180 200 200 130 130 130 130 130 130 130 130 130 130 130 130 130 220 240 240 130 220 240 240 130 130 130 130 130 130 130 130 ___ ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 0 0 1 4 4 4 ___ ___ ___ ___ ___ ___ ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 5 4 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6 SMD POWER INDUCTORS SDB1205 SERIES 10. UL CARD : TERAOKA SEISAKUSHO CO LTD 4-22 1-CHOME HIROMACHI SHINAGAWA-KU, TOKYO JAPAN E56086 (S) Flame returdant aramid paper tape, Cat. Nos. 512F+, 560F+, 565S+, 681S+. Flame returdant aramid paper tape, Cat. Nos. 560S+, 561S+, 562S+, rated 200 C. Flame returdant acetate cloth tape, Cat. Nos. 570F+, 571F+, 573F+. Flame returdant polyester film tape, Cat. Nos. 680F+, 684F. Flame returdant glass cloth tape, Cat. Nos. 510F+, 540S+, 541F+, 685S+. Flame returdant glass cloth tape, Cat. No. 54S, rated 200 C. Flame returdant cotton cloth tape, Cat. Nos. 590F+, 715F+. Flame returdant polyimide film tape, Cat. No. 650S+, rated 200 C. Flame returdant tellon tape, Cat. Nos. 841+, 846+. Flame returdant PVC tape, Cat. Nos. 305F+, 307F+, 380F+. Flame returdant polyester fiber tape, Cat. Nos. 511F+, 551F+. Flame returdant epoxy varnish impregnated polyester web tape, Cat. Nos. 530F+. Flame returdant epoxy varnish impregnated glass paper tape, Cat. No. 531F+. Flame returdant copper foil tape, Cat. No. 831S+. Flame returdant copper foil tape, Cat. No. 8321+. Flame returdant alumlnum foil tape, Cat. Nos. 833+, 834+. Epoxy varnish impregnated polyester non-woven fabric tape, cat. no. 530F°rated 150 C. polyester film tape, Cat. Nos. 631S°, 632S, rated 130 C. Flame returdant polyester film tape, Cat. No. 630F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber tape Cat. No. 673F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber/polyester film tape, Cat. No. 850F°, rated 130 C. + - Subjected to Flame Retardant tests only. °- Complies with Flame Retardent requirements when so marked. Mraking: Company name or "E56086" and catalog designation and "Flame Retardent" if applice, bie. brinted on the central paper or outer package. ( A card ) ____________ R D11/0114874 51 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 7