SMD POWER INDUCTORS SDB1203 SERIES 1. PART NO. EXPRESSION : SDB12031R5YZF (a) (b) (c) (d)(e)(f) (a) Series code (d) Tolerance code : M = ±20%, Y = ±30% (b) Dimension code (e) X, Y, Z : Standard part (c) Inductance code : 1R5 = 1.5uH (f) F : Lead Free 2. CONFIGURATION & DIMENSIONS : C B E F G I D H 101 A I PCB Pattern Unit:m/m A B C D E F G H I 12.5±0.3 12.5±0.3 3.90 Max. 5.0±0.2 2.2±0.2 7.6±0.2 7.0 Ref. 5.4 Ref. 2.8 Ref. 3. SCHEMATIC : 4. MATERIALS : (a) Core : DR Ferrite Core a h d g (b) Core : RI Ferrite Core b (c) Base : LCP (d) Wire : Enamelled Copper Wire e (e) Tape : Mylar Tape (f) Terminal : Tinned Copper Plate f c (g) Adhesive : Epoxy (h) Ink : Bon Margue 5. GENERAL SPECIFICATION : a) Temp. rise : 45°C Max. b) Rated current : Base on temp. rise & ǻL/L0A = 20% Max. c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +80°C e) Resistance to solder heat : 260°C.10secs NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS SDB1203 SERIES 6. ELECTRICAL CHARACTERISTICS : Part No. Inductance ( µH ) Test Frequency ( Hz ) RDC ( mȍ ) Max. IDC (A) Max. SDB12031R5YZF 1.5±30% 1V / 100K 13 7.80 SDB12032R2YZF 2.2±30% 1V / 100K 15 6.80 SDB12033R9YZF 3.9±30% 1V / 100K 26 5.50 SDB12035R6YZF 5.6±30% 1V / 100K 32 4.80 SDB12038R2YZF 8.2±30% 1V / 100K 45 4.10 SDB1203100MZF 10.0±20% 1V / 100K 50 3.90 SDB1203120MZF 12.0±20% 1V / 100K 60 3.50 SDB1203150MZF 15.0±20% 1V / 100K 80 3.00 SDB1203180MZF 18.0±20% 1V / 100K 100 2.70 SDB1203220MZF 22.0±20% 1V / 100K 110 2.50 SDB1203270MZF 27.0±20% 1V / 100K 130 2.20 SDB1203330MZF 33.0±20% 1V / 100K 160 2.10 SDB1203390MZF 39.0±20% 1V / 100K 180 2.00 SDB1203470MZF 47.0±20% 1V / 100K 220 1.80 SDB1203560MZF 56.0±20% 1V / 100K 260 1.60 SDB1203680MZF 68.0±20% 1V / 100K 310 1.50 SDB1203820MZF 82.0±20% 1V / 100K 360 1.40 SDB1203101MZF 100.0±20% 1V / 100K 400 1.30 SDB1203121MZF 120.0±20% 1V / 100K 530 1.10 SDB1203151MZF 150.0±20% 1V / 100K 610 1.00 SDB1203181MZF 180.0±20% 1V / 100K 800 0.90 SDB1203221MZF 220.0±20% 1V / 100K 970 0.85 SDB1203271MZF 270.0±20% 1V / 100K 1200 0.75 SDB1203331MZF 330.0±20% 1V / 100K 1350 0.70 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS SDB1203 SERIES 7. CHARACTERISTICS CURVES : @ TEMP. RISE VS. DC SUPERPOSITION RESPONSE CURVE 90 80 331M 101M 330M 1 2 3 100M 1R5Y 70 60 50 ǻt (°C) 40 30 20 10 0 0 4 5 6 7 8 9 10 DC CURRENT (A) @ INDUCTANCE VS. FREQUENCY RESPONSE CURVE @ INDUCTANCE VS. DC SUPERPOSITION RESPONSE CURVE 103 103 5 5 331M 3 102 L 5 (uH) 3 102 101M 330M 1 10 331M 3 L 5 (uH) 3 101M 330M 1 10 100M 5 5 3 3 100M 1R5Y 1R5Y 100 10 -3 3 5 10 -2 3 5 10 -1 3 5 10 0 3 5 10 1 3 5 10 2 100 10 -3 3 5 FREQUENCY(MHZ) 10 -2 3 5 10 -1 3 5 10 0 3 5 10 1 3 5 10 2 DC CURRENT (A) NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS SDB1203 SERIES RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS 10s max. 255°C Natural cooling 230°C 180°C 150°C Pre-heating 40s max. 90 to 120s 8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE N ØC B A 2.0±0.5 ØC D G EMBOSSED CARRIER * CARRIER TAPE WIDTH : D P:16 m/m 101 4 m/m 101 101 101 101 ( 2 ) DIMENSIONS Unit:m/m STYLE A B C D G 13-24 330 21±0.8 13±0.5 24 26 N +0 50 T -0 30.4 ( 3 ) Q'TY & G.W. PER PACKAGE OUTER : CARTON INNER : REEL SERIES SDB1203 Q'TY (PCS) G.W. (gw) STYLE Q'TY (PCS) G.W. (Kg) SIZE (cm) 800 2200 13-24 3200 12.3 40 x 40 x 24 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 SMD POWER INDUCTORS SDB1203 SERIES 9. RELIABILTY AND TEST CONDITION : TEST ITEM SPECIFICATION SOLDERABILITY TEST CONDITION MORE THAN 90% OF THE PREHEAT : 125±25°C FOR 60 SECONDS TERMINAL ELECTRODE SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SHALL BE COVERED SOLDER TEMP. : 245±5°C WITH FRESH SOLDER. FLUX : ROSIN DIP TIME : 4±1 SECONDS THERMAL SHOCK INDUCTANCE SHALL ROOM TEMP. -25±2°C TEST NOT CHANGE MORE 15 MINUTES 30 MINUTES THAN ±20% ( TEMP. CYCLE ) ROOM TEMP. 85±2°C 15 MINUTES 30 MINUTES TOTAL : 50 CYCLES HUMIDITY TEMPERATURE : 40±2°C RESISTANCE TEST HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS HIGH TEMP. TEMPERATURE : 85±2°C RESISTANCE TEST APPLIED CURRENT : PER SPEC. TIME : 500 HOURS 10. UL CARD : GUANGDONG CHINA Mtl Dsg BC Coating Type TC __ __ __ ANSI Type __ TI NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 SMD POWER INDUCTORS SDB1203 SERIES 10. UL CARD : E54705 (M) RTI H D Min UL94 Elec Mech H H V 4 C T Thk Flame with W 9 T w/o A R mm Class Imp 5 I Mtl Dsg Col Imp I I Liquid crystal plyester (LCP), designated "EKONOL" or "SUMIKASUPER", furnished in the form of pellets, (Contd) E4008 , E400X E4008 NC , BK NC , WT , BK E4010 E400(Y)L , E4008L E4810 NC , BK NC , BK NC , BK 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 130 130 130 130 130 220 220 220 130 220 220 220 130 130 130 130 130 130 130 130 130 130 130 130 130 180 200 200 130 180 200 200 130 130 130 130 130 130 130 130 130 130 130 130 130 220 240 240 130 220 240 240 130 130 130 130 130 130 130 130 ___ ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 0 0 1 4 4 4 TERAOKA SEISAKUSHO CO LTD 4-22 1-CHOME HIROMACHI SHINAGAWA-KU, TOKYO JAPAN ___ ___ ___ ___ ___ ___ ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 5 4 E56086 (S) Flame returdant aramid paper tape, Cat. Nos. 512F+, 560F+, 565S+, 681S+. Flame returdant aramid paper tape, Cat. Nos. 560S+, 561S+, 562S+, rated 200 C. Flame returdant acetate cloth tape, Cat. Nos. 570F+, 571F+, 573F+. Flame returdant polyester film tape, Cat. Nos. 680F+, 684F. Flame returdant glass cloth tape, Cat. Nos. 510F+, 540S+, 541F+, 685S+. Flame returdant glass cloth tape, Cat. No. 54S, rated 200 C. Flame returdant cotton cloth tape, Cat. Nos. 590F+, 715F+. Flame returdant polyimide film tape, Cat. No. 650S+, rated 200 C. Flame returdant tellon tape, Cat. Nos. 841+, 846+. Flame returdant PVC tape, Cat. Nos. 305F+, 307F+, 380F+. Flame returdant polyester fiber tape, Cat. Nos. 511F+, 551F+. Flame returdant epoxy varnish impregnated polyester web tape, Cat. Nos. 530F+. Flame returdant epoxy varnish impregnated glass paper tape, Cat. No. 531F+. Flame returdant copper foil tape, Cat. No. 831S+. Flame returdant copper foil tape, Cat. No. 8321+. Flame returdant alumlnum foil tape, Cat. Nos. 833+, 834+. Epoxy varnish impregnated polyester non-woven fabric tape, cat. no. 530F°rated 150 C. polyester film tape, Cat. Nos. 631S°, 632S, rated 130 C. Flame returdant polyester film tape, Cat. No. 630F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber tape Cat. No. 673F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber/polyester film tape, Cat. No. 850F°, rated 130 C. + - Subjected to Flame Retardant tests only. °- Complies with Flame Retardent requirements when so marked. Mraking: Company name or "E56086" and catalog designation and "Flame Retardent" if applice, bie. brinted on the central paper or outer package. NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6