SMM0204 / MS1 Vishay Draloric Metal Film, Cylindrical Resistors FEATURES • Stable metal film on high quality ceramic • Low TC and tight tolerances • Excellent stability in different environmental conditions • Force fitted steel caps, tin plated on nickel barrier • Reliable solderable terminations to facilitate surface mounting STANDARD ELECTRICAL SPECIFICATIONS MODEL POWER RATING P70°C1) W LIMITING ELEMENT VOLTAGE MAX2) V쓖 TEMPERATURE COEFFICIENT ppm/K TOLERANCE RESISTANCE RANGE E-SERIES % Ω SMM0204-MS1 0.25 200 15 0.1 0.25 0.5 43R – 221K 22R – 221K 10R – 221K 24 – 192 24 – 192 24 – 192 SMM0204-MS1 0.25 200 25 0.1 0.25 0.5 43R – 511K 22R – 511K 10R – 1M0 24 – 192 24 – 192 24 – 192 SMM0204-MS1 0.25 200 50 0.5 1 10R – 1M0 R82 – 10M 24 – 192 24 – 96 SMM0204-MS1 0.25 200 100 5 R22 – 10M 24 SMM0204HF MS1 4) 0.25 200 50 1 Zero-Ohm-Resistor: OMM0204-MS1 Rmax = 10mΩ 1) 2) PxR 3) Values below 10 Ω on request 4) Low inductive trim for high frequency application 3) 96 Imax = 2A Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material Rated voltage: 10R – 1K0 • Further values and tolerances on request • Coating: Light green for Pink Violet Beige TC= 100ppm/K, 50ppm/K and zero ohm resistor TC= 25ppm/K TC= 15ppm/K HF version • Marking : see appropriate catalog or web page • Zero ohm resistor has a black band only ORDERING INFORMATION SMM0204-MS1 50 562R 1% B0 MODEL TC ppm / K RESISTANCE VALUE Ω TOLERANCE ± % PACKAGING B0-Blistertape 10000 pcs www.vishay.com 8 For Technical Questions contact : [email protected] Document Number 20004 Revision 21-Oct-02 SMM0204 / MS1 Vishay Draloric Metal Film Cylindrical Resistors DIMENSIONS DIMENSIONS [in millimeters] MODEL SMM0204-MS1 Dmax d* L A max A min 1.4 D -0.15 3.6 - 0.15 0.85 0.5 *d measured in the middle of the resistor SOLDER PAD DIMENSIONS [in millimeters] MODEL REFLOW SOLDERING a 1.0 SMM0204-MS1 b 1.6 WAVE SOLDERING l 2.2 a 1.2 b 1.6 l 2.2 TECHNICAL SPECIFICATIONS PARAMETER UNIT SMM0204 – MS1 Rated Dissipation at 70°C W 0.25 Limiting Element Voltage 2) V쓖 200 Insulation Voltage (1 min) V > 300 dc/ac peak ≤ 220 Thermal Resistance 1) K/W Insulation Resistance Ω Category Temperature Range °C - 55 / + 125 (+ 155) 10 –9 /h <1 g 18 Failure Rate Weight / 1000pcs on measurements on test board acc. to EN 140000 2) Rated voltage: 60 10 PxR 50 Rated Power in % 120 on epoxy glass (PCB) 100 40 80 °C Temperature rise in 1) Based ≥ 10 30 60 on ceramic 20 40 10 20 0 0 0.1 Temperature rise Document Number 20004 Revision 21-Oct-02 0.2 0.3 0.4 Power in W 0 -55 - 25 0 Derating For Technical Questions contact : [email protected] 25 50 75 100 125 155 70 Ambient Temperature in °C www.vishay.com 9 SMM0204 / MS1 Metal Film Cylindrical Resistors 3 2 Current Noise in µV/V Non - linearity A3 in dB Vishay Draloric 120 110 100 90 1 0.5 0.3 0.1 80 0.05 0.03 70 60 1K 10K 0.01 1K 5K 10K Current Noise 100K 1M 10M Resistance Value in Ω Z - R0 in % Phase angle ϕ in ° 60 10 100 Non - linearity SMM0204-MS1 40 10 Ω 20 60 39 Ω 100 Ω 0 470 Ω 1 KΩ - 20 50K 100K 500K 1M 5M 10M Resistance Value in Ω SMM0204-MS1 40 10 Ω 20 39 Ω 0 100 Ω 470 Ω 1 KΩ - 20 - 40 - 40 4.7 KΩ - 60 10 KΩ 5 10 50 100 HF - Performance 120 100 80 SMM0204-MS1 60 ϑÜ = f [P] Parameter : size 0.4 0.3 0.2 0.1 5 10 50 100 HF - Performance 120 100 ϑU 60 40 40 20 20 0 20 0 500 1000 Frequency F in MHz ϑS]] ϑÜ = f [ϑ Parameter : ϑU 80 0 0.5 10 KΩ - 80 1 500 1000 Frequency F in MHz Temperature rise ϑü in K - 80 1 4.7 KΩ - 60 40 60 80 C C C C 0° 30°C 40° 50° 0°C 70° 6 C ° 80 C ° 90 C 0° 0 1 °C 0 11 C 0° 2 1 C 0° 13 C 0° 14 C 0° 15 100 120 140 160 =2 Film temperature ϑs in °C Load P in W ∆R/R (t) = f [∆R/R (t = 1000h)] Parameter : time 20 10 00 0 0 50 00 0 h 0 0 20 00 h 80000 h 4000 h h 2000 00 h h 0.1 0 00 0.01 Resistance change [∆R/R] in % after 1000 h 0.01 10R , 10 0R , 1K 1 100 0K K 1M 0.1 ϑs] ∆R/R [t = 1000h] = f [ϑ h Parameter : Resistance value 1 10 1 Resistance change [∆R/R] in % 0.1 1 0.01 1 20 40 60 80 100 120 140 160 Film temperature ϑs in °C Stability Nomogram typical values (for handling see general explanations) www.vishay.com 10 For Technical Questions contact : [email protected] Document Number 20004 Revision 21-Oct-02 SMM0204 / MS1 Test Voltage in V Power rating P in W Metal Film Cylindrical Resistors 1000 SMM0204-MS1 100 Vishay Draloric 3K 1K 10 100 1 Secondary conditions: a) P ≤ P70 (permissible constant power at ϑu ≤ 70°C) b) ϑu ≤ 70°C c) Úmax see diagram (Max.pulse voltage) 0.1 10-5 10-4 10-3 10-2 10 10R 10-1 1 10 Square pulse ti in s Test Voltage in V Pulse Rating P ≤ P70 Power rating P in W 100R 1K Single pulse high voltage overload test 1.2 / 50µs EN 140000 4.27 1000 SMM0204-MS1 100 10K 100K 10K 100K Resistance Value in Ω 3K 1K 10 100 1 Secondary conditions: a) P 0 (peak puls, single pulse) b) ϑu ≤ 70°C c) Úmax see diagram (Max.pulse voltage) 0.1 10-5 10-4 10-2 10 10-1 1 10 Square pulse ti in s 10R 100R 1K Single pulse high voltage overload test 10 / 700µs EN 140000 4.27 0 Pulse Voltage Ûmax in V Pulse Rating P 10-3 Resistance Value in Ω 1000 SMM0204-MS1 800 600 400 200 Secondary conditions: a) P see diagram (Pulse Rating) 0 b) ϑu ≤ 70°C -5 -5 -4 -4 -3 -3 1010 1010 1010 Maximum Pulse Voltage Maximum Pulse Voltage Document Number 20004 Revision 21-Oct-02 -2 -2 1010 -1 -1 1010 1 1 10 10 Square pulse ti int s in s Square Pulse i For Technical Questions contact : [email protected] www.vishay.com 11 SMM0204 / MS1 Vishay Draloric 120 ϑü = [°C] Metal Film Cylindrical Resistors 100 0°C =2 ϑu 0.4W 80 0°C ϑu =4 60 0°C 0.25W ϑu =6 40 0°C 0.125W ϑu =8 20 0.0625W 00 ϑu 1 2 3 5 7 10 2 3 5 7 100 2 3 5 7 60 80 =1 100 °C 20 ϑu =1 °C 120 140 surface temperature ϑs [°C] number of mounted resistors [pcs] Power rating as a function of packaging density (guideline) Testboard FR4 (50 x 50 x 1.6)mm PACKAGING MODEL REEL BULK TAPE WIDTH DIAMETER PIECES / REEL CODE SMM0204MS1 SMM0204HF -MS1 OMM0204MS1 8mm Blistertape 180mm 180mm 180mm 330mm 1000 2500 3000 10000 B1* BE B3 B0 BULK FEEDING MAGAZINE LOOSE IN PLASTIC CONTAINER PIECES / MAGAZINE PIECES / CONTAINER PIECES CODE 3000 M3 PIECES CODE 1000 L1 5000 L5 *For < = TC25 and Tol. < = 0.5% only www.vishay.com 12 For Technical Questions contact : [email protected] Document Number 20004 Revision 21-Oct-02 SMM0204 / MS1 Metal Film Cylindrical Resistors Vishay Draloric PERFORMANCE REQUIREMENTS 1) TEST CONDITIONS OF TEST Endurance Test at 70°C IEC 60115-1 4.25.1 1000 hours at 70°C 1.5 hours "ON" 0.5 hours "OFF" ≤ ± 0.25 % Endurance at UCT 1000 hours at 125°C without load ≤ ± 0.25 % Overload Test Short time overload for 2 seconds ≤ ± 0.05 % IEC 60115-1 4.13 2.5 x rated voltage or ≤ 2 x limiting element voltage Thermal Shock IEC 60115-1 4.19 IEC 60068-2-14 Rapid change between upper and lower category temperature ≤ ± 0.05 % Damp Heat Steady State IEC 60115-1 4.24 IEC 60068-2-3 56 days at 40°C and 93% relative humidity ≤ ± 0.25 % Resistance to Soldering Heat 10 seconds at 260°C solder bath temperature ≤ ± 0.05 % IEC 60115-1 4.25.3 IEC 60115-1 4.18 IEC 60068-2-20 1) for a resistance range from 10Ω to 332KΩ, Limits for change of resistance at test acc. to CECC 40401-803 APPLICABLE SPECIFICATIONS • CECC40000 / 40400 / 40401-803 • EN140400 / IEC 60115 – 1 Document Number 20004 Revision 21-Oct-02 For Technical Questions contact : [email protected] www.vishay.com 13