( DataSheet : www.DataSheet4U.com ) D..P/CRCW Vishay Thick Film, Rectangular, Precision Resistors FEATURES • • • • • Metal glaze on high quality ceramic Protective overglaze Solder contacts on Ni barrier layer Excellent stability in different environmental conditions Low temperature coefficient and tight tolerances STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE POWER RATING LIMITING ELEMENT TEMPERATURE TOLERANCE RESISTANCE E-SERIES P70°C VOLTAGE MAX COEFFICIENT RANGE % Ω INCH METRIC W V쓖 ppm/°C CEC 40401-802/EIA-575 100 0.5 10R – 1M0 96 D10P 50 0.25, 0.5, 1 100R – 1M0 96 CRCW0402 0402 1005 0.063 50 25 0.25, 0.5, 1 100R – 10K 96 100 0.5 10R – 10M 96 D11P 50 0.25 100R – 1M0 96 CRCW0603 0603 1608 0.1 75 50 0.5, 1 100R –10M 96 25 0.25, 0.5, 1 100R – 10K 96 100 0.5 10R – 10M 96 D12P 50 0.25 100R – 1M0 96 CRCW0805 0805 2012 0.125 150 50 0.5, 1 100R – 10M 96 25 0.25, 0.5, 1 100R – 10K 96 100 0.5 10R – 10M 96 D25P 50 0.25 100R – 1M0 96 CRCW1206 1206 3216 0.25 200 50 0.5, 1 100R – 10M 96 25 0.25, 0.5, 1 100R – 10K 96 CRCW1210 1210 3225 0.33 200 100 0.5 100R – 1M0 96 50 0.5 100R – 1M0 96 CRCW1218 1218 3246 1.0 200 100 0.5 100R – 2M2 96 50 0.5, 1 100R – 2M2 96 CRCW2010 2010 5025 0.5 400 100 0.5 10R – 10M 96 50 0.5, 1 100R – 10M 96 CRCW2512 2512 6332 1.0 500 100 0.5 10R – 10M 96 50 0.5, 1 100R – 10M 96 • Power rating depends on the max. temperature at the solder point, • Ask about further value ranges the component placement density and the substrate material • Special terminations for conductive adhesive attachment on • Marking and packaging: see appropriate catalog or web pages request TECHNICAL SPECIFICATIONS PARAMETER UNIT Rated Dissipation at 70°C (CECC 40401 | EIA 575) Limiting Element Voltage 2) Insulation Voltage (1 min) Thermal Resistance Insulation Resistance Category Temperature Range Failure Rate Weight / 1000pcs W V쓖 Vpeak K/W Ω °C h–1 g D10P CRCW0402 0.063 D11P D12P D25P CRCW1210 CRCW1218 CRCW0603 CRCW0805 CRCW1206 0.1 0.125 0.25 0.33 1.0 50 > 75 ≤ 8701) 75 > 100 ≤ 5501) 150 > 200 ≤ 4401) 0.65 2 5.5 200 > 300 ≤ 2201) > 10 9 - 55 / + 125 0.3 • 10–9 10 200 > 300 ≤ 1403) 200 > 300 16 29.5 3) CRCW2010 CRCW2512 0.5 1.0 400 > 300 ≤ 883) 500 > 300 ≤ 653) 25.5 40.5 1) Measuring conditions in acc. to CECC 40401 2) Rated voltage: PxR 3) Depending on solder pad dimensions ORDERING INFORMATION D-SERIES D11P MODEL 25 TC ppm/°C CRCW-SERIES CRCW0603 MODEL 562R RESISTANCE VALUE Ω 25R RESISTANCE VALUE Ω ± 1% = 3 sig. digits, plus multiplier ± 5% = 2 sig. digits, plus multiplier Example: 49R9F = 49.9Ω, ± 1% 5R1J = 5.1Ω, ± 5% 3011F = 3.01KΩ, ± 1% 000Z = 0Ω Jumper www.vishay.com 40 0.5 TOLERANCE ±% PN PACKAGING PN-Papertape 20.000pcs D 25 RT6 TOLERANCE TC* PACKAGING ± % ppm/°C PN-Papertape 20,000 pcs C = ± 0.25% *NOTE: Entering a TC value in this D = ± 0.5% field is optional. If no TC specified F = ± 1% by the Customer, the default TC will be highest listed for Tolerance specified. For technical questions in Europe contact : [email protected] For technical questions in Americas/Asia contact : [email protected] Document Number 20009 Revision 18-Oct-02 www.DataSheet4U.com D..P/CRCW Vishay Thick Film, Rectangular, Precision DIMENSIONS SIZE DIMENSIONS [in millimeters] INCH METRIC L W H T1 T2 0402 1005 1.0 ±0,05 0.5 ±0.05 0.35 ±0.05 0.25 ±0.05 0.2.±0.1 0603 1608 1.55 – 0.05 0.85 ±0.1 0.45 ±0.05 0.3 ±0.2 0805 2012 + 0.10 2.0 + 0.20 – 0.10 + 0.10 – 0.20 1206 3216 3.2 1210 3225 3.2 ±0.2 + 0.10 – 0.20 1.25 ±0.15 0.45 ±0.05 0.3 + 0.20 - 0.10 0.3.±0.2 0.3.±0.2 1.6 ±0.15 0.55 ±0.05 0.45 ±0.2 0.4.±0.2 2.5 ±0.2 0.55 ±0.05 0.45 ±0.2 0.4.±0.2 4.6 ±0.15 0.55 ±0.05 0.45 ±0.2 0.4.±0.2 1218 3246 3.2 2010 5025 5.0 ±0.15 2.5 ±0.15 0.6 ±0.05 0.6 ±0.2 0.6.±0.2 Temperature Rise In °C 90 80 0402 0603 0805 1206 1210 70 60 Rated Power In % 2512 6332 6.3 ±0.2 3.15 ±0.15 0.6 ±0.05 0.6 ±0.2 0.6.±0.2 Dimensions 1210 to 2512 and solder-pad dimensions: see standard chip resistors D..CRCW 120 100 80 50 2010 40 60 2512 30 40 20 20 10 0 0 0.1 0.2 0.3 Temperature Rise 0.4 0 - 55 0.5 Power in W -25 0 25 50 Derating 75 100 125 150 175 70 Ambient Temperature in °C PERFORMANCE TEST RESULTS % TEST CONDITIONS OF TEST Endurance Test at 70°C IEC 60115-1 4.25.1 Endurance at UCT IEC 60115-1 4.25.3 Overload Test IEC 60115-1 4.13 Thermal Shock IEC 60115-1 4.19 IEC 60068-2-14 Damp Heat Steady State IEC 60115-1 4.24 IEC 60068-2-3 Resistance to Soldering Heat IEC 60115-1 4.18 IEC 60068-2-20 1000 hours at 70°C, 1.5 hours "ON", 0.5 hours "OFF" 0402 0603 ≤ ± 1.0 0805 1206 1210 ≤ ± 1.5 1218 2010 2512 ≤ ± 1.0 1000 hours at 125 °C without load ≤ ± 1.0 ≤ ± 0.5 ≤ ± 1.0 Short time overload 2.5 x rated voltage or ≤ 2 x limiting element voltage. Rapid change between upper and lower category temperature ≤ ± 0.25 ≤ ± 0.25 ≤ ± 0.5 ≤ ± 0.25 ≤ ± 0.25 ≤ ± 0.5 56 days at 40°C and 93% relative humidity ≤ ± 1.0 ≤ ± 0.5 ≤ ± 1.0 10 seconds at 260°C solder bath temperature ≤ ± 0.25 ≤ ± 0.25 ≤ ± 0.5 HF-CHARACTERISTIC / CURRENT NOISE / NON-LINEARITY AND PACKAGING: see standard Chip resistors D...CRCW... APPLICABLE SPECIFICATIONS • • • • CECC40000 / 40400 / 40401 EN140400 / IEC 60115 – 1 EIA 575 MIL-PRF-55342 Document Number 20009 Revision 18-Oct-02 For technical questions in Europe contact : [email protected] For technical questions in Americas/Asia contact : [email protected] www.vishay.com 41