Product Brief SiI9389 HDMI® 1.4 Port Processor Applications Featuring 3D over HDMI, HDMI Ethernet Channel, Audio Return Channel, Content Type Bits, plus Innovative InstaPort™ Technology • LCD, plasma, OLED and front and rear projection DTV The SiI9389 is a second generation port processor offering comprehensive HDMI Specification Version 1.4 features for DTVs and AVRs. The SiI9389 transforms the viewing Key Features experience with 3D cinema and games while simplifying home connectivity by eliminating • Five HDMI input ports the need for separate Ethernet or S/PDIF cables and connectors. Silicon Image port • 3D over HDMI processors feature InstaPort™ technology for fast switching times between sources. • HDMI Ethernet Channel HDTVs are evolving by adding 3D video and IP content and services. Bringing 3D video to the home enhances the consumer home theater experience while HDMI Ethernet Channel enables new applications to run over TCP/IP, UPnP, and LiquidHD™ protocols. Both combine to create a new personal entertainment experience. • Audio Return Channel with S/PDIF input Channel - a high-speed, 100 Mb/sec full-duplex networking data channel and S/PDIF Audio Return Channel are supported on any one port. All HDMI 1.4 signals, including audio, video, EDID, HDCP and CEC are fully supported. • Content Type Bits • InstaPort™ switching technology The Silicon Image family of port processors enable OEMs to differentiate with innovative features offering consumers real value. The SiI9389 port processor outputs to the HDMI interface, requiring no change to the system architecture while providing the flexibility to introduce features as the market demands. The SiI9389 includes Silicon Image’s InstaPort technology which can dramatically reduce switching time between different sources to as low as one second. It also supports the Silicon Image Mobile High-Definition Link (MHL™) technology, a low-power, low-pin-count solution that enables mobile phones, digital cameras, portable media players and other mobile devices to connect directly to HDTVs. MHL technology formats are auto-detected on up to two ports. The SiI9389 switches between five HDMI 1.4 input ports. All ports support 3D Video and Content Type bits, which specify the video type in the HDMI data stream. HDMI Ethernet The SiI9389 port processer is complemented by the SiI9334 HDMI transmitter for source devices with the same rich HDMI 1.4 feature set. SiI9389 System Diagram • MHL™ technology • Built-in HDCP decryption engines • TMDS Core @225MHz ® Up to 5 HDMI® or 2 MHL™ Sources Portable Media Player Set Top Box DTV HD Camcorder Mobile Phone SiI9389 Port Processor Game console with Component TMDS S/PDIF DTV SoC HDMI 1.4 Ethernet Channel 2 I S/SPDIF HDMI 1.4 Ethernet Channel Audio DAC Home Network Router Ethernet AVR SiI9389 Features Industry-Standard Compliance SiI9389 Starter Kit (CP9389HDMI) Contents include: • • • • • DDC/EDID for VGA • Integrated CEC Consumer Electronics Control HDMI 1.4 DVI 1.0 EIA/CEA-861E HDCP 1.1 System Operation • Register-programmable via slave I2C interface Hardware HDMI/MHL Inputs • SiI9334 source board • SiI9389 sink board • HDMI Ethernet cable Software • Simon receiver software tool Documentation • User's guide • Schematics • Bill of materials (BOM) Content Protection • Five HDMI 1.4 input ports: - 3D Video formats (1080i @ 50/59.94/60Hz, 1080p @ 23.98/24Hz, 720p @ 50/ 59.94 /60Hz) on all ports - HDMI Ethernet Channel/Audio Return Channel on any one port - Content Type Bits on all ports • One unencrypted HDMI output • 36 bit color depth resolutions up to 1080p @ 60Hz or 720p/1080i @ 120Hz • InstaPort™ fast HDMI port switching • Up to two MHL auto-sensing ports with 24 bit color depth and input resolutions up to 1080p @ 30Hz or 720/1080i @ 60Hz • Shared EDID NVRAM for HDMI andVGA ports • Integrated HDCP cipher engine • Built-in HDCP BIST (self-test) • Pre-programmed HDCP keys Power Management • Low standby power mode with auxiliary power mode for CEC and EDID support • Network “On”, TV “Standby” power mode enables networking functionality while the TV display is not powered • < 2.0W power consumption Package • 100-pin, 14mm X 14mm, 0.5mm pitch QFP SiI9389 Block Diagram ® ALWAYS ON CEC_A MHL Control CBUS DDC DDC0 DDC1 DDC2 DDC3 DDC4 DDC5 I2C Local I2 C RX0 Port 0 HDCP Reg NVRAM Booting Sequence OTP Config/ Status Reg CEC_P HPD INTRQ POWER DOWN HDCP Engine Port 1 TMDS DPLL/DEC RX2 Port 2 SCDT RX3 Port 3 Port 4 CEC EDID SRAM RX1 RX4 CPI Reg HDMI Datapath TMDS Tx Tx TMDS ENC MHL DP Silicon Image, Inc. 1060 E. Arques Avenue Sunnyvale, CA 94085 HEC/ARC Ethernet RX/TX S/PDIF T 408.616.4000 F 408.830.9530 www.siliconimage.com Copyright © 2009 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, SiI9389, SiI9334, MHL, InstaPort, the InstaPort logo, MHL, and LiquidHD are trademarks or registered trademarks of Silicon Image, Inc. in the United States and/or other countries. HDMI, the HDMI logo, High-Definition Multimedia Interface, are trademarks or registered trademarks in the United States and/or other countries and are used under license from HDMI Licensing, LLC. All other trademarks are the property of their respective owner in the United States and/or other countries. Product specifications are subject to change without notice. Part Number: SiI9389CLU SiI-PB-1061 rev2 9/09