Model 117 1”x1” Stratum 3 OCXO ♦Frequency Stability to Stratum 3 of GR-1244 ♦Package and Footprint Identical to Model 118 Stratum 3E for Upgrade Option ♦Low Phase Jitter: <1pSec ♦+3.3Vdc or +5.0Vdc Operation ♦Precision Low Aging “AT” Cut Crystal ♦Through-Hole or Surface Mount Configuration Electrical Characteristics Parameter Sym Conditions Min Typical Max Unit 3.135 4.75 3.30 5.0 3.465 5.25 Vdc Vdc Vcc = Max., Std. Load 3.5 4.0 W 1.5 Power Requirements Power Supply Turn-On Power Vcc Pmax ± 5% ± 5% 117L 117S Steady State Power Pss Vcc = Max, Std. Load @ +25°C Warm-Up Time Twu To within ±0.3 ppm @ +25°C W 5 minutes 10, 12.8, 16.384, 19.44, 20, 38.88 38.88 MHz ± 0.2 ± 0.5 ppm ± 0.075 ±0.150 ±0.125 ±0.250 ppm Frequency Stabilities Center Frequency fnom Initial Tolerance fcal Frequency vs. Temperature 10.0 Ta = +25°C (At time of Shipment) 0°C to +70°C -40°C to +85°C ∆f/∆Temp Frequency vs. Voltage ∆f/∆Vcc Vcc ± 5% ± 10 ppb Frequency vs Time (Aging) ∆f/∆Time per Day 20 years ±5 ±2.5 ppb ppm 24 Hour Holdover Stability ∆f/24Hr Inclusive of Temperature, Supply Variation and 24 hours Aging ±0.20 Total Free-Running Accuracy ∆f/Life All Conditions for 20 years (Reference to fnom) Electrical Freq Adjust Option ∆f/Vc Vc = 0 V to Vcc Sym @ 50% Level ±0.37 ppm ± 4.6 ppm ±9.2 ppm Waveform: HCMOS Output Symmetry Amplitude Vo Logic “1” Logic “0” Rise/Fall Times tr, tf 20% to 80% Load RL Output to Ground Phase Noise 40 50 60 % 0.1Vcc V V 10 nSec 0.9Vcc 6 10KΩ // 15pF Offset = 10 Hz -80 dBc/Hz 100 Hz -115 dBc/Hz 1K Hz -135 dBc/Hz 10 KHz -140 dBc/Hz 100 KHz -143 dBc/Hz ♦♦♦ CTS ♦ 171 Covington Dr. ♦ Bloomingdale, IL 60108 ♦ 800-757-6686 ♦ www.ctscorp.com ♦♦♦ REVISION X1 Page 1 of 4 Model 117 1”x1” Stratum 3 OCXO Environmental and Mechanical Requirements Storage Temperature : Reflow Soldering : Shock : Vibration : Case : Seal : Surface Mount Base : MSL : 6/6 RoHS Compliance : -55°C to +125°C Will withstand 240°C for 20 seconds 50 G’s 11 ms, Pulse, 3 shocks per axis 10G’s Peak, 20 to 2000 Hz Dual-in-Line Resistance Weld High Temperature FR-4 1 This product is fully compliant to RoHS Directive 2002/95/EC Model 117 Standard Options Frequency in MHz Model 117 Supply Voltage L = +3.3Vdc S = +5.0 Vcc - Op. Temp.Range A = 0°C to +70°C B = -40°C to +85°C ___.________ Example: 117LBFT-20.000 Elect. Freq Control F = Fixed – No Adjust V = Electrical Freq. Control Package Style T = Through-Hole S = Surface Mount ♦♦♦ CTS ♦ 171 Covington Dr. ♦ Bloomingdale, IL 60108 ♦ 800-757-6686 ♦ www.ctscorp.com ♦♦♦ REVISION X1 Page 2 of 4 Model 117 1”x1” Stratum 3 OCXO Package Specifications Figure 1 CTS 117LBFT XX.XXX MHz S/N XXXXX YYWW Made in China Figure 2 CTS 117LBFT XX.XXX MHz S/N XXXXX YYWW Made in China TEST # ♦♦♦ CTS ♦ 171 Covington Dr. ♦ Bloomingdale, IL 60108 ♦ 800-757-6686 ♦ www.ctscorp.com ♦♦♦ REVISION X1 Page 3 of 4 Model 117 1”x1” Stratum 3 OCXO Recommended Land Patern (Surface Mount Pkg.) ♦♦♦ CTS ♦ 171 Covington Dr. ♦ Bloomingdale, IL 60108 ♦ 800-757-6686 ♦ www.ctscorp.com ♦♦♦ REVISION X1 Page 4 of 4