117S, 126S, 151S, 176S www.vishay.com Vishay Techno 3/8" (9.52 mm) Square Wirewound Trimmers FEATURES • Precious metal wiper • 1.0 W to + 85 °C • TCR ± 50 ppm/°C • Solderable leads • Military quality at affordable prices APPLICATIONS Wirewound trimmers are particularly useful in those applications where any combination of high power, low temperature coefficient of resistance and/or excellent long term life stability are important design considerations. STANDARD RESISTANCE VALUES RESISTANCE (1) () NOMINAL RESOLUTION (%) ELECTRICAL SPECIFICATIONS 10 1.10 Electrical travel: 22 turns ± 4 turns Resistance range: 10 to 10 k Extended range available in non MIL-SPEC product Resistance tolerance: ± 5 % standard Closer tolerances available Temperature coefficient: (- 65 °C to + 150 °C) ± 50 ppm/°C Power rating: 1.0 W at + 85 °C derated to 0 W at + 150 °C, these specifications exceed MIL-SPEC End resistance: 1 or 2 %, whichever is greater Equivalent noise resistance (ENR): 100 maximum Dielectric (DWV): 1000 VAC at atmospheric pressure These specifications exceed MIL-SPEC Insulation resistance: > 100 000 M (500 VDC) These specifications exceed MIL-SPEC 20 0.85 50 0.65 100 0.51 200 0.40 500 0.45 1K 0.34 2K 0.27 5K 0.20 10K 0.16 20K 0.13 Note (1) Other resistances available upon request ENVIRONMENTAL SPECIFICATIONS CIRCUIT DIAGRAM Temperature limits: - 65 °C to + 150 °C Sealing: Fully sealed case (non-hermetic) MECHANICAL SPECIFICATIONS 1 Operating torque: 5 oz.-inches maximum Rotation: Clutch stop, wiper idles Weight: 0.935 g maximum Resistive element: Nickel chromium Rotational life: 200 cycles minimum Terminal strength: 2 lbs for 10 s CW 3 2 GLOBAL PART NUMBER INFORMATION New global part numbering: 117S500RB (preferred part number format) 1 1 7 S 5 0 0 R B GLOBAL MODEL TYPE RESISTANCE VALUE PACKAGING 117 = Teflon leadwire 126 = PC mount 151 = Top adjustment screw 176 = Side adjustment screw / = Continuous rotation S = Clutch stop R = Decimal K = Thousand 100R = 100 5K00 = 5 k B = Bulk Historical part numbering: 117s501 (will continue to be accepted) 117 s 501 HISTORICAL MODEL TYPE RESISTANCE VALUE Revision: 07-Feb-12 Document Number: 68016 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 117S, 126S, 151S, 176S www.vishay.com Vishay Techno DIMENSIONS 3/8" (9.52 mm) Square in inches (millimeters) P Lead Style - 126S L Lead Style - 117S 0.375 ± 0.005 (9.52 ± 0.127) 0.040 ± 0.010 (1.02 ± 0.254) 0.419 ± 0.010 (10.64 ± 0.254) 0.075 ± 0.010 (1.90 ± 0.254) Radius 2 0.055 ± 0.005 (1.40 ± 0.127) X 0.380 ± 0.005 G (9.65 ± 0.127) CW Y 0.313 ± 0.005 (7.95 ± 0.127) 0.117 ± 0.005 (2.97 ± 0.127) 0.023 ± 0.003 (0.584 ± 0.076) R 0.023 ± 0.003 (0.584 ± 0.076) 0.100 ± 0.005 (2.54 ± 0.127) #30 AWG leads, color coded Teflon insulated 6" (152.40 mm) minimum length 0.217 ± 0.005 (5.51 ± 0.127) 0.167 ± 0.005 (4.24 ± 0.127) 0.093 ± 0.005 (2.36 ± 0.127) Dia. 0.150 ± 0.010 (3.81 ± 0.254) W Lead Style - 151S 3 0.100 ± 0.005 (2.54 ± 0.127) 0.025 ± 0.003 (0.635 ± 0.076) 0.314 ± 0.005 (7.98 ± 0.127) 0.060 ± 0.005 (1.52 ± 0.127) Dia. 1 0.375 ± 0.005 (9.52 ± 0.127) X 0.300 (7.62) Min. 0.027 ± 0.002 (0.686 ± 0.051) Dia. X Lead Style - 176S 0.314 ± 0.005 (7.98 ± 0.127) 0.190 ± 0.005 (4.83 ± 0.127) 0.025 ± 0.003 (0.635 ±0.076) 0.346 ± 0.005 (8.79 ± 0.127) 0.023 ± 0.003 (0.584 ±0.076) 0.093 ± 0.005 (2.36 ± 0.127) Dia. 0.375 0.005 (9.52 0.127) 3 2 1 0.410 ± 0.005 (10.41 ± 0.127) 3 2 1 0.300 (7.62) Min. 0.023 ± 0.003 (0.584 ± 0.076) 0.027 ± 0.002 (0.686 ± 0.051) Dia. 0.300 (7.62) Min. 0.100 ± 0.005 (2.54 ± 0.127) 0.100 ± 0.005 (2.54 ± 0.127) 0.027 ± 0.002 (0.686 ± 0.051) Dia. 0.375 ± 0.005 (9.52 ± 0.127) 0.025 ± 0.003 (0.635 ± 0.076) 0.093 ± 0.005 (2.36 ± 0.127) Dia. 0.410 ± 0.010 (10.41 ± 0.254) 0.040 ± 0.005 (1.02 ± 0.127) 0.190 ± 0.005 (4.83 ± 0.127) 0.139 ± 0.005 (3.53 ± 0.127) 0.040 ± 0.005 (1.02 ± 0.127) 0.023 ± 0.003 (0.584 ± 0.076) 0.100 ± 0.005 (2.54 ± 0.127) 0.139 ± 0.005 (3.53 ± 0.127) 0.100 ± 0.005 (2.54 ± 0.127) ENVIRONMENTAL PERFORMANCE CONDITIONS MIL-PRF-39015 REQUIREMENT TYPICAL CHANGE 50 h at 1 W at + 25 °C R 0.5 % (2) R < 0.08 % R 1.0 % (2) R < 0.07 % 72 h, no load at - 65 °C R 1.0 % (2) R < 0.05 % Low temperature operation 1 h storage, 45 min rated power at - 55 °C R 1.0 % (2)(3) R < 0.08 % High temperature exposure 1000 h, no load at + 150 °C R 1.0 % (2)(3) R < 0.03 % R 1.0 % (2) R < 0.22 % R 1.0 % (2) R < 0.02 % TEST (1) Power conditioning Thermal shock (108) (107) Low temperature storage 5 cycles, - 55 °C to + 125 °C Moisture resistance (106) 480 h at rated power with humidity ranging from 80 % RH to 98 % RH Resistance to soldering heat (210) + 350 °C for 3 s R 1.0 % (2)(3) R < 0.27 % Shock (213) 18 shocks, 100 g, 6 ms, sawtooth, 3 axes Vibration (204) 10 Hz to 2000 Hz, 20 g, 12 h, 3 axes R 1.0 % (2)(3) R < 0.04 % 200 cycles R 2.0 % R < 0.06 % 10 000 h at rated power at + 85 °C R 3.0 % R < 0.23 % Load life (108) Notes (1) Numbers in parenthesis refer to test method MIL-STD-202 as modified by the detail specification (2) For values below 100 W, add 0.05 W to the allowable change (3) The referenced tests also require that setting stability change shall not exceed ± 0.05 % plus the specified maximum resolution DERATING 1.00 0.80 W Rotational life 0.60 0.40 0.20 0 Revision: 07-Feb-12 25 50 75 85 100 125 150 AMBIENT TEMPERATURE °C 175 Document Number: 68016 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000