1N5768 Isolated Diode Array with HiRel MQ, MX, MV, and MSP Screening Options SCOTTSDALE DIVISION APPEARANCE 10-PIN Ceramic Flat Pack WWW . Microsemi .C OM DESCRIPTION These low capacitance diode arrays with common cathode are multiple, discrete, isolated junctions fabricated by a planar process and mounted in a 10-PIN package for use as steering diodes protecting up to eight I/O ports from ESD, EFT, or surge by directing them to the positive side of the power supply line (see figure 1). This circuit application is further complimented by the 1N5770 (separate data sheet) that has a common anode. An external TVS diode may be added between the positive supply line and ground to prevent overvoltage on the supply rail. They may also be used in fast switching coredriver applications. This includes computers and peripheral equipment such as magnetic cores, thin-film memories, plated-wire memories, etc., as well as decoding or encoding applications. These arrays offer many advantages of integrated circuits such as highdensity packaging and improved reliability. This is a result of fewer pick and place operations, smaller footprint, smaller weight, and elimination of various discrete packages that may not be as user friendly in PC board mounting. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • • APPLICATIONS / BENEFITS • • • • • • • Hermetic Ceramic Package Isolated Diodes To Eliminate Cross-Talk Voltages High Breakdown Voltage VBR > 60 V at 10 μA Low Leakage IR< 100nA at 40 V Low Capacitance C < 4.0 pF Options for screening in accordance with MIL-PRF19500/474 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers. For example, designate MX1N5768 for a JANTX screen. High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet: 10 Base T Computer I/O Ports LAN Switching Core Drivers IEC 61000-4 Compatible (see circuit in figure 1) 61000-4-2 ESD : Air 15kV, contact 8kW 61000-4-4 (EFT) : 40A – 5/50 ns 61000-4-5 (surge): 12A 8/20 μs MAXIMUM RATINGS • • • • • • • MECHANICAL AND PACKAGING VBR Reverse Breakdown Voltage 60 V min (Notes 1 & 2) IO Continuous Forward Current 300 mA (Notes 1 & 3) IFSM Forward Surge Current (tp=1/120 s) 500 mA (Note 1) o 400 mW Power Dissipation per Junction @ 25 C 500 mW Power Dissipation per Package @ 25oC (Note 4) o Operating Junction Temperature range –65 to +150 C Storage Temperature range of –65 to +200oC NOTE 1: NOTE 2: NOTE 3: NOTE 4: • • • • 10-PIN Ceramic Flat Pack Weight 0.25 grams (approximate) Marking: Logo, part number, date code and dot identifying pin #1 Carrier Tubes; 19 pcs (standard) Each Diode Pulsed: PW = 100 ms max; duty cycle <20% o o Derate at 2.4 mA/ C above +25 C o o Derate at 4.0 mW/ C above +25 C ELECTRICAL CHARACTERISTICS (Per Diode) @ 25oC unless otherwise specified 1N5768 MAXIMUM FORWARD VOLTAGE VF2 IF = 500 mA (Note 1) MAXIMUM REVERSE CURRENT MAXIMUM CAPACITANCE (PIN TO PIN) IR1 VR = 40 V VR = 0 V F = 1 MHz Vdc Vdc μAdc pF ns ns 1 1.5 0.1 4.0 40 20 Ct MAXIMUM FORWARD RECOVERY TIME tfr IF = 500 mA NOTE 1: Pulsed: PW = 300 µs +/- 50 µs, duty cycle <2%, 90 µs after leading edge. Copyright © 2006 01-24-2006 REV B Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N5768 PART NUMBER MAXIMUM REVERSE RECOVERY TIME trr IF = IR = 200 mA irr = 20 mA RL = 100 ohms MAXIMUM FORWARD VOLTAGE VF1 IF = 100 mA (Note 1) 1N5768 Isolated Diode Array with HiRel MQ, MX, MV, and MSP Screening Options SCOTTSDALE DIVISION IR IFSM Ct WWW . Microsemi .C OM SYMBOLS & DEFINITIONS Symbol VBR VF DEFINITION Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Maximum Reverse Current: The maximum reverse current that will flow at the specified voltage and temperature. Forward Surge Current: The peak forward surge current at a specified pulse width Capacitance: The capacitance of the diode as defined @ 0 volts at a frequency of 1 MHz and stated in picofarads. SCHEMATIC PACKAGE DIMENSIONS CIRCUIT Supply rail (+VCC) I/O Port 1N5768 GND (or -VCC) Steering Diode Application FIGURE 1 Copyright © 2006 01-24-2006 REV B Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2