MAD1106 and MAD1106e3 Switching Diode Array Steering Diode TVS Array™ SCOTTSDALE DIVISION APPEARANCE These low capacitance diode arrays are multiple, discrete, isolated junctions fabricated by a planar process and mounted in a 14-pin package for use as steering diodes protecting up to eight I/O ports from negative ESD, EFT, or surge by directing them to ground (pin 14)*. They may also be used in fast switching core-driver applications. This includes computers and peripheral equipment such as magnetic cores, thin-film memories, plated-wire memories, etc., as well as decoding or encoding applications. These arrays offer many advantages of integrated circuits such as highdensity packaging and improved reliability. This is a result of fewer pick and place operations, smaller footprint, smaller weight, and elimination of various discrete packages that may not be as user friendly in PC board mounting. They are available with either Tin-Lead plating terminations or as RoHS Compliant with annealed matte-Tin finish by adding an “e3” suffix to the part number. *See MMAD1105(e3) for directing positive transients to positive side of the power supply line. Top Viewing Pin Layout WWW . Microsemi .C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • • • APPLICATIONS / BENEFITS • Low capacitance steering diode protection for high frequency data lines • RS-232 & RS-422 Interface Networks • Ethernet: 10 Base T • Computer I / O Ports • LAN • Switching Core Drivers 8 Diode Array Molded 14-Pin Dual-In-Line Package UL 94V-0 Flammability Classification Low Capacitance 1.5 pF per diode Switching speeds less than 5 ns RoHS Compliant devices available by adding “e3” suffix IEC 61000-4 compatible 61000-4-2 (ESD): Air 15kV, contact – 8 kV 61000-4-4 (EFT): 40A – 5/50 ns 61000-4-5 (surge): 12A, 8/20 µs MAXIMUM RATINGS • • • • • • MECHANICAL AND PACKAGING ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless otherwise specified PART NUMBER MAD1106 MAD1106e3 Copyright © 2005 6-28-2005 REV L LEAKAGE CURRENT IR TA = 25°C LEAKAGE CURRENT IR TA = 150°C CAPACITANCE C @0V REVERSE RECOVERY TIME trr FORWARD VOLTAGE VF IF = 10 mA FORWARD VOLTAGE VF IF = 100 mA µA µA pF ns V V V WORKING PEAK REVERSE VOLTAGE VRWM V MIN MAX MAX @VR MAX @VR TYP MAX MAX MAX 90 75 0.200 20 300 20 1.5 5.0 1.00 1.20 BREAKDOWN VOLTAGE VBR @ IBR =100µA Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 MAD1106, e3 • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 flammability classification • TERMINALS: Tin-Lead or RoHS Compliant annealed matte-Tin plating solderable per MIL-STD750 method 2026 • MARKING: MSC logo, MAD1106 or MAD1106e3 and date code. Pin #1 is to the left of the dot or indent on top of package. • WEIGHT: 0.997 grams (approximate) • Carrier tubes: 25 pcs (Standard) Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Forward Surge Current: 2 Amps (8.3 ms) 12 Amps (8/20 µs) Continuous Forward Current: 400 mA (one diode) Power Dissipation (PD): 1500 mW (total) Solder temperatures: 260°C for 10 s (maximum) MAD1106 and MAD1106e3 Switching Diode Array Steering Diode TVS Array™ SCOTTSDALE DIVISION VBR VRWM VF IR C WWW . Microsemi .C OM SYMBOLS & DEFINITIONS Definition Symbol Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature. Capacitance: The capacitance of the TVS as defined @ 0 volts at a frequency of 1 MHz and stated in picofarads. OUTLINE AND CIRCUIT INCHES DIM MIN MILLIMETERS MAX MIN MAX A 0.740 0.780 18.80 19.81 B 0.235 0.265 5.969 6.731 C 0.120 0.140 3.048 3.556 D 0.270 0.330 6.858 8.382 E 0.320 0.380 8.128 F 0.100 BSC 9.652 2.540 BSC G 0.015 0.021 0.381 0.533 H 0.017 0.023 0.431 0.584 I 0.140 0.160 3.556 4.064 MAD1106, e3 CIRCUIT CONFIGURATION OUTLINE Copyright © 2005 6-28-2005 REV L Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2