SIGNAL RELAY • • • • • International Standard Foot Print Small Size, Light Weight Low Power Consumption (150 mw) High Sensitivity Sealed SPECIFICATIONS Power : 30W/62.5VA Max Switching Voltage : 220VDC/250VAC Rated Voltage : 30VDC/125VAC Max Continuous Current : 2A DC / 1A AC Contact Resistance : 50m Ohms (Initial) Nominal Coil Power : 0.15W (approx) Operating Power : 0.1W (approx) Life Expectancy Electrical 7 : 10 operations 5 : 10 operations 0.5 167 *6 4.2 0.6 180 12 8.4 1.2 960 24 16.8 2.4 2880 Between Contacts & Coil : 1000 VRMS Between Open Contact : 1000 VRMS - 2C E - XXX Specialities if any Product Series Sealed Coil Voltage 12 : 12 VDC (Refer Coil Data) Contact arrangement 2C - 2 Change Over DIMENSION 9.9 20.2 *48 33.6 4.8 * Check with Dielectric Strength Insulation Resistance 3.5 12 11520 factory for availability CIRCUIT DIAGRAM 3.5 Mechanical 5 - 0.3 12 Contact Rating 46 Coil Resistance Ohms ± 10% : Silver Alloy+ Gold clad HOW TO ORDER Drop-out Voltage VDC Contact Material Pick-up Voltage VDC : 2 Form C. Nominal Voltage VDC Contact Arrangement COIL DATA 7.62 : 1000 Meg.Ohms at 0 500 VDC, 25 C, RH 50 Operate time at Nominal Voltage : 6 milli sec. (Typ) Release time at Nominal Voltage : 5 milli sec. (Typ) DRILLING PATTERN 1 4 6 8 16 13 11 9 Ø1.0 Max. Operating Speed : 20 cpm 0 7.62 At Rated Load 0 Ambient Temperature : –45 C to +85 C Weight : 5 gms (approx) Typical applications Telecommunication Equipments, Automation Systems, Electrical Appliances, Call Monitors etc. 7.62 5.08 5.08 View : Terminal Side All dimensions are in mm. Specifications subject to change without notice. Tolerance unless otherwise specified is ± 10%