Model 658 CLOCK, HIGH FREQUENCY MULTIPLIER FEATURES • • • • • • • • • • Standard 7x5mm Surface Mount Footprint LVCMOS, Differential LVPECL or LVDS Outputs Frequency Range 38 – 750 MHz Frequency Stability, ±50 ppm Standard (± 25 ppm and ± 100 ppm available) +2.5Vdc or +3.3Vdc Operation Operating Temperature to –40°C to +85°C Output Enable Standard Low Phase Jitter, PLL Multiplier Tape & Reel Packaging RoHS/Green Compliant DESCRIPTION The Model 658 is a ceramic packaged Clock oscillator offering reduced size and enhanced stability. The small size means it is perfect for any application. The enhanced stability means it is the perfect choice for today’s communications applications that require tight frequency control. ORDERING INFORMATION 658 M OUTPUT TYPE FREQUENCY IN MHz C = CMOS, Pin 1 Enable Pin 2 N.C. (standard) L = LVDS, Pin 1 Enable Pin 2 N.C. (standard) P = PECL, Pin 1 Enable Pin 2 N.C. (standard) M = CMOS, Pin1 N.C. Pin 2 Enable V = LVDS, Pin1 N.C. Pin 2 Enable E = PECL, Pin1 N.C. Pin 2 Enable M - indicates MHz and decimal point. Frequency is recorded with minimum 4 significant digits to the right of the "M". SUPPLY VOLTAGE 2 = 2.5 Vdc (LVDS and PECL only) 3 = 3.3 Vdc FREQUENCY STABILITY 5 = ± 25 ppm 3 = ± 50 ppm (standard) 2 = ± 100 ppm OPERATING TEMPERATURE RANGE C = 0°C to +70°C (standard) I = -40°C to +85°C Example Part Number: 658P3C3155M5200 Document No. 008-0316-0 Page 1 - 5 Rev. A ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠ ٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠ Model 658 7x5mm Low Cost LVCMOS, LVPECL or LVDS Clock ELECTRICAL CHARACTERISTICS PARAMETER Absolute Maximums SYMBOL CONDITIONS MIN TYP MAX Maximum Supply Voltage VCC - -0.5 - 7.0 V Storage Temperature TSTG - -55 - 125 °C fO - MHz Frequency Range LVCMOS LVPECL and LVDS Frequency Stability (See Note 1 and Ordering Information) ∆f/fO - TA - 50 - 250 38 - 750 - - 25, 50 or 100 ± ppm 70 °C Operating Temperature Commercial 0 Industrial Supply Voltage (See Ordering Information) VCC Supply Current LVPECL 2.5 3.3 85 2.63 3.47 < 160 MHz ≥ 160 MHz - - 40 50 < 160 MHz ≥ 160 MHz - - 75 100 < 160 MHz ≥ 160 MHz - 60 80 Application of VCC - - 10 ms Bandwidth 12 kHz - 20 MHz - 3.5 5 ps RMS V ±5% Phase Jitter V Maximum Load ICC LVDS Start Up Time 25 -40 2.38 3.14 LVCMOS Electrical and Waveform Parameters UNIT TS tjms mA Enable Function Enable Input Voltage VIH Pin 1 or Pin 2 Logic '1', Output Enabled 0.7*VCC - - Disable Input Voltage VIL Pin 1 or Pin 2 Logic '0', Output Disabled - - 0.3*VCC IIL Pin 1 or Pin 2 Logic '1' , Output Disabled Pin 1 or Pin 2 Logic '1' - - 20 uA - 5 10 ms Disable Current Enable Time LVCMOS WAVEFORM Output Load TPLZ - - 15 pF 45 - 55 % CMOS Load 90%VCC - - V CMOS Load - - 10%VCC - 2 5.0 ns - 50 - Ohms 45 - 55 % V CL Output Duty Cycle SYM Output Voltage Levels Logic '1' Level VOH VOL @ 20% - 80% Levels Logic '0' Level Rise and Fall Time LVPECL WAVEFORM Output Load TR, TF @ 50% Level - RL Output Duty Cycle SYM Output Voltage Levels Logic '1' Level VOH PECL Load VCC - 1.025V - - VOL PECL Load - - VCC - 1.62V 0.4 1.0 ns Ohms Logic '0' Level Rise and Fall Time LVDS WAVEFORM Output Load TR, TF @ VCC - 1.3V @ 20% - 80% Levels - 100 - Output Duty Cycle SYM @ 1.25V 45 - 55 % Differential Voltage VOD RL = 100 Ohms 250 350 450 mV Output Voltage Levels Logic '1' Level VOH LVDS Load - - 1.6 V VOL LVDS Load 0.9 - - - 0.4 1.0 Logic '0' Level Rise and Fall Time - RL TR, TF @ 20% - 80% Levels ns Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and 10 year aging at an average operating temperature of +40 °C. Document No. 008-0316-0 ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ Page 2 - 5 171 Covington Drive Rev. A ٠ Bloomingdale, IL 60108 ٠٠٠ Model 658 7x5mm Low Cost LVCMOS, LVPECL or LVDS Clock CMOS/TTL OUTPUT WAVEFORM Tr TEST CIRCUIT, CMOS LOAD Tf N.C. VOH + - mA 90%, 80%, 2.4V 6 + 50%, 1.5V + POWER SUPPLY 10%, 20%, 0.5V VM - 4 5 0.01uF D.U.T. CL 1 2 Including probe capacitance. 3 VOL UPTIME (t) PERIOD (T) Enable Input or N.C. DUTY CYCLE = t/T x 100 (%) PECL/LVDS OUTPUT WAVEFORM Tr N.C. or Enable Input TEST CIRCUIT, PECL LOAD Vcc - 2.0V Tf VOH OUT RL 50 80% VOS CH2 + 50% - mA CH1 6 + 20% OUT 5 4 0.01uF VM - VOL UPTIME (t) + POWER SUPPLY RL 50 D.U.T. Vcc - 2.0V 1 2 3 PERIOD (T) DUTY CYCLE = t/T x 100 (%) Enable Input or N.C. N.C. or Enable Input TEST CIRCUIT, LVDS LOAD D.U.T. PIN ASSIGNMENTS PIN 1 2 3 4 SYMBOL EOH / NC NC / EOH GND Output 5 Output / NC 6 VCC CH2 DESCRIPTION Enable or No Connect No Connect or Enable Circuit & Package Ground RF Output Complimentary RF Output + mA RL 100 - CH1 6 + (PECL and LVDS Only) + POWER SUPPLY Supply Voltage - 5 4 0.01uF D.U.T. VM 1 2 3 ENABLE TRUTH TABLE PIN 1 or 2 Logic ‘1’ Open Logic ‘0’ PIN 4 / PIN 5 Output Output High Imp. Document No. 008-0316-0 ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ Enable Input or N.C. N.C. or Enable Input Page 3 - 5 171 Covington Drive Rev. A ٠ Bloomingdale, IL 60108 ٠٠٠ Model 658 7x5mm Low Cost LVCMOS, LVPECL or LVDS Clock MECHANICAL SPECIFICATIONS PACKAGE DRAWING MARKING INFORMATION (7.0 ±0.2) 0.276 ±0.008 (1.4) 0.055 PIN 1 IDENTIFIER CTS ** YYWW 658P3C3 ● XXXMXXXX 1. 2. 3. 4. (1.27) 0.050 (5.0 ±0.2) 0.197 ±0.008 (3.73) 0.147 4 5 6 3 2 1 NOTES 1. Termination pads (e4), barrier-plating is nickel (Ni) with gold (Au) flash plate. 2. Reflow conditions per JEDEC J-STD-020. (2.54) 0.100 (5.08) 0.200 (2.0) MAX 0.079 ** - Manufacturing Site Code. YYWW – Date code, YY – year, WW – week. Truncated CTS part number. XXXMXXXX - Frequency marked with 4 significant digits after the ‘M’. Key: (mm) Inch SUGGESTED SOLDER PAD GEOMETRY SUGGESTED REFLOW PROFILE .071 [1.80] 300 Maximum 260°C, 10 seconds C BYPASS 5 6 Typical 245°C 4 200 .165 [4.20] Temp. (°C) 130°C 100 .079 [2.00] 2 1 3 .100 [2.54] .200 [5.08] 0 0 [mm] Key: Inch 30 ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 90 120 150 180 210 240 270 300 Time (Seconds) CBYPASS should be ≥ 0.01 uF. Document No. 008-0316-0 60 Page 4 - 5 171 Covington Drive Rev. A ٠ Bloomingdale, IL 60108 ٠٠٠ Model 658 7x5mm Low Cost LVCMOS, LVPECL or LVDS Clock TAPE AND REEL INFORMATION DIMENSIONS IN MILLIMETERS 17.5 2.0 Ø13 4.0 8.0 Ø1.50 1.75 2.40 2.10 120° 16.0 8.40 7.90 Ø60 5.70 5.40 Ø180 Ø23 DIRECTION OF FEED Device quantity is 1,000 pieces per 180mm reel. ENVIRONMENTAL SPECIFICATIONS Temperature Cycle: 400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1 minute transfer time between temperatures. Mechanical Shock: 1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3 mutually perpendicular planes (18 total shocks). Sinusoidal Vibration: 0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles each in 3 mutually perpendicular planes (9 times total). Gross Leak: No leak shall appear while immersed in an FC40 or equivalent liquid at +125°C for 20 seconds. Fine Leak: Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent. Resistance to Solder Heat: Product must survive 3 reflows of +260°C peak, 10 seconds maximum. High Temperature Operating Bias: 2,000 hours at +125°C, maximum bias, disregarding frequency shift. Frequency Aging: 1,000 hours at +85°C, full bias, less than ±5 ppm shift. Moisture Sensitivity Level: Level 1 per JEDEC J-STD-020. QUALITY AND RELIABILITY Quality systems meet or exceed the requirements of ISO 9000:2000 standards. Document No. 008-0316-0 ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ Page 5 - 5 171 Covington Drive Rev. A ٠ Bloomingdale, IL 60108 ٠٠٠