Pomona ® Model 6109 44 Pin SOIC Clip® Test Clip Lead Spacing: 0.050” (1,27) These new test clips are designed especially for incircuit testing on 44 pin Small Outline Integrated Circuits (SOIC & SOJ). The SOIC Clip ® test clip assures a positive connection to all chip leads and provides hands-free testing. Upper contacts are .025" (0,63) sq. pins on 0.100" (2,54) centers. Pins are perfect for sq. pin receptacles, wire-wrap or soldered wires. • Gold plated upper contacts fit standard double row ribbon cable connectors. • Gold plated lower contacts assure reliable, noise free connections. • Molded barriers between each contact allow connections to be made on live boards without accidental shorting to adjacent chip leads. • Open back of clip allows probing of chip leads while the clip is attached. • Fits all 44 pin surface mounted SOIC & SOJ chips from .30" (7,62) to .60" (15,24) wide. (This clip will also work on 42 pin SOIC & SOJ chips.) • Compact design requires a minimum of board space. Clips can be placed on chips that are spaced only .040" (1,02) apart, end-to-end. The clip requires .14" (3,56) beyond each side of the chip for placement. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d6109_1_01.doc PomonaACCESS 90320 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1