Pomona ® Models 4862, 4864, 6268, 6269 Replacement Cover Screws For Phenolic and Shielded Aluminum Boxes FEATURES: • These screws are specifically designed for securing the covers on our phenolic, die cast aluminum and extruded aluminum boxes. • Each screw is designed to fit a specific application. • All are made of high quality carbon steel with zinc plating for the best corrosion resistance. Figure 1:Model 4864,#2-32 Self-Tapping Phillips Replaces cover screws used in all die cast aluminum size A, size B and Miniature boxes. Carbon steel with blue zinc plating. Figure 2: Model 4862,#4-40 UNC Flat Head Phillips Replaces cover screws usedin all extruded aluminum alloy size F, G & H boxes. Carbon steel with blue zinc plating. Figure 3: Model 6268, #4-40 UNC Binding Head Phillips Replaces cover screws used in die cast aluminum alloy, size C Boxes. Carbon steel with blue zinc plating Figure 4: Model 6269, #2-56 UNC Pan Head Phillips Replaces cover screws used in phenolic molded boxes. Carbon steel with blue zinc plating. ORDERING INFORMATION: Models 4862, 4864, 6268 & 6269. Available in packages of 100 screws. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d4862-64_6268-69_1_01.doc PomonaACCESS 90446 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1