Silicon Double Balanced HMIC™ Mixer MA4EX240L-1225 MA4EX240L-1225 Silicon Double Balanced HMIC™ Mixer 1700 - 2500 MHz Features • • • • • • SOT-25 Outline Low Cost Miniature Plastic Package Low Conversion Loss: 6.4 dB at 2100 MHz 7.4 dB at 2400 MHz +3 to +7 dBm LO Drive HMIC™ Process Silicon Low Barrier Schottky Diodes DC -400 MHz IF Bandwidth 5 4 Description M/A-COM’s MA4EX240L-1225 is a silicon monolithic 1700 2500 MHz double balanced mixer in a low cost miniature surface mount SOT-25 package. The dies uses M/A-COM’s unique HMIC™ silicon/glass process to achieve low loss passive elements while retaining the advantages of low barrier silicon Schottky diodes. Applications These mixers are well suited for high volume wireless applications where small size and repeatability are required. Typical applications include frequency conversion, modulation, and demodulation for receivers and transmitters in wireless LAN and other data applications in the 2.4 GHz 15M band. 1 2 3 Pin Configuration PIN 1 2 3 Function Gnd Gnd IF PIN 4 5 — Function RF LO — Ordering Information Model No. MA4EX240L-1225 MA4EX240L-1225T Package Bulk Tape and Reel Electrical Specifications @ +25°C Parameter Conversion Loss Frequency Range 2100 MHz 1700-2500 MHz 2100 MHz 1700-2500 MHz 2100 MHz 1700-2500 MHz 2100 MHz 1700-2500 MHz 2100 MHz 1700-2500 MHz 2100 MHz 1700-2500 MHz DC - 500 MHz L - R Isolation L - I Isolation R - I Isolation LO VSWR RF VSWR IF VSWR Input IP3 Input 1 dB Compression IF 1 dB Bandwidth 2100 MHz 1700-2500 MHz 2100 MHz 1700-2500 MHz 0-400 MHz Test Conditions LO Drive = +5 dBm, fLO = fRF + fIF RF = -10 dBm, IF = 60 MHz LO Drive = +5 dBm RF Level = -10 dBm LO Drive = +5 dBm RF Level = -10 dBm LO Drive = +5 dBm RF Level = -10 dBm LO Drive = +5 dBm RF Level = -10 dBm LO Drive = +5 dBm RF Level = -10 dBm LO Drive = +5 dBm IF Level = -10 dBm LO Drive = +5 dBm, fRL = fLO-FIF IF = 60 MHz LO Drive = +5 dBm IF = 60 MHz LO = 2050 MHz @ +5 dBm Units dB dB dB dB dB dB dB dB — — — — — — dBm dBm dBm dBm MHz Min. — — 14 — — — — — — — — — — — +10 +8 — — — Typ. 6.4 7.0 17.5 14 23 23 13.5 13 2.1 2.1 1.3 2.0 1.3 — +13.0 +12.0 +1.0 +1.0 400 Max. 8.2 9.5 — — — — — — — — — — — — — — — — — V2.00 M/A-COM Division of AMP Incorporated n North America: Tel. (800) 366-2266, Fax (800) 618-8883 n Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Silicon Double Balanced HMIC™ Mixer MA4EX240L-1225 Typical Performance Curves (LO Drive = +5 dBm, RF = -10 dBm, IF = 60 MHz) Isolation Conversion Loss 5 5 .0 5 .5 10 ISOLATION (dB) LOSS (dB) 6 .0 6 .5 7 .0 7 .5 8 .0 L-R R-I 15 L-I 20 25 8 .5 9 .0 1700 1900 2100 F R E Q U E N C Y (M H z ) 2300 30 1700 2500 1900 2100 2300 2500 2300 2500 F R E Q U E N C Y (M H z ) Typical VSWR 20 4 .0 IP3 & 1dB Compression Point 18 16 VSWR RF VSWR LO VSWR 3 .0 ABSOLUTE POWER (dBm) 3 .5 IF VSWR 2 .5 2 .0 1 .5 IP3 14 12 10 8 6 1 dB Comp. 4 2 1 .0 1700 1900 2100 2300 2500 0 1700 1900 2100 F R E Q U E N C Y (M H z ) F R E Q U E N C Y (M H z ) Absolute Maximum Rating 1 Parameter Operating Temperature Storage Temperature Incident LO Power Incident RF Power Maximum Ratings -40°C to +85°C -65°C to +150°C +20 dBm +20 dBm Schematic RF IF LO 1. Exceeding these limits may cause permanent damage. Case Style 1,2 SOT-25 SOT-25 5X F E TYP. H C D B G A J DIM A B C D E F G H J INCHES MIN MAX 0.1103 0.1181 0.1023 0.1181 0.0355 0.0512 0.0591 0.0669 0.0374 Typ. 0.0138 0.0197 0.0031 0.0079 0.0020 0.0059 0.0138 0.0216 MILLIMETERS MIN MAX 2.8 3.10 2.6 3.00 0.9 1.30 1.5 1.7 0.95 Typ. 0.35 0.5 0.08 0.20 0.05 0.15 0.35 0.55 1. Dimensions do not include mold flash, protrusion or gate burrs which shall not exceed 0.0098 in (.25mm) per side. 2. Lead Coplanarity is 0.003 (0.08) max. V2.00 M/A-COM Division of AMP Incorporated n North America: Tel. (800) 366-2266, Fax (800) 618-8883 n Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.