Silicon Double Balanced HMICTM Mixer LO=3300 MHz, RF=5800 MHz MA4EX585L-1225T V 2.00 Features n n n n n n LO = 3300 MHz, RF = 5800 MHz +3 dBm to +7 dBm LO Drive 8.3 dB Typical Conversion Loss Double Balanced Passive Mixer NO External Matching Required Low Cost SOT-25 Miniature Plastic Package Outline SOT 25 Top View 3 2 1 Description M/A-COM's MA4EX585L-1225T is a silicon monolithic double balanced mixer in a low cost miniature surface mount SOT25 package. The die uses M/A-COM’s unique HMIC silicon/glass process to realize low loss passive elements while retaining the advantages of low barrier silicon Schottky barrier diodes to produce a compact device. 4 5 PIN Configuration Applications These mixers are well suited for high volume cordless phone and WLAN applications where small size and repeatability are required. Typical applications include frequency conversion, modulation, and demodulation in wireless receivers and transmitters. PIN Function PIN Function 1 RF 4 Gnd 2 Gnd 5 IF 3 LO Ordering Information Part Number MA4EX585L-1225T Package Tape and Reel Absolute Maximum Ratings1 Parameter Schematic Maximum Ratings IF RF Operating Temperature -40 °C to +85 °C Storage Temperature -65 °C to +150 °C Incident LO Power +20 dBm Incident RF Power +20 dBm 1. Exceeding these limits may cause permanent damage. LO Silicon Double Balanced HMICTM Mixer, LO=3300 MHz, RF=5800 MHz MA4EX585L-1225T V 2.00 Electrical Specifications: @ + 25 °C Parameter Conversion Loss Frequency Range Test Conditions Units Min. Avg. Max. dB - 8.3 9.0 LO = 3.3+/-0.2 GHz LO Drive = +5 dBm RF = 5.8+/-0.2 GHz RF = -10 dBm L - R Isolation LO = 3.3 GHz LO Drive = +5 dBm dB - 28.0 - R - L Isolation RF = 5.8 GHz LO Drive = +5 dBm dB - 24.0 - dB - 24.0 - dB - dB - 12.0 - Ratio - 2.4:1 - Ratio - 1.8:1 - RF = -10 dBm L - I Isolation R - I Isolation LO = 3.3 GHz RF = 5.8 GHz LO Drive = +5 dBm LO Drive = +5 dBm - RF = -10 dBm RF VSWR RF = 5.8 GHz LO Drive = +5 dBm RF = -10 dBm LO VSWR LO = 3.3 GHz LO Drive = +5 dBm IF VSWR IF = 2.5 GHz LO Drive = +5 dBm Ratio - 1.6:1 - dBm - 11.0 - dBm - 1.1 - IF = 0 dBm Input IP3 Input 1 dB Compression LO = 3.3 GHz LO Drive = +5 dBm RF = 5.8 GHz RF = -10 dBm LO = 3.3 GHz LO Drive = +5 dBm RF = 5.8 GHz 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300 Silicon Double Balanced HMICTM Mixer, LO=3300 MHz, RF=5800 MHz MA4EX585L-1225T V 2.00 Typical Performance Curves (LO Drive = +5 dBm, RF = -10 dBm, IF = 2500 MHz) Conversion Loss Isolation LO FREQUENCY (MHz) 6.000 3100 3150 3200 3250 3300 3350 3400 3450 3500 0 6.500 -5 PLO = 7dBm 7.000 R-I ISOLATION(dB) LOSS (DB) PLO = 5dBm 7.500 8.000 8.500 -10 -15 L-I -20 R-L -25 9.000 L-R PLO = 3dBm -30 9.500 -35 10.000 5600 5650 5700 5750 5800 5850 5900 5600 5950 5650 5700 5750 5800 5850 5900 5950 6000 RF FREQUENCY (MHz) FREQUENCY (MHz) VSWR INPUT IP3 & 1 dB Compression Power IF FREQUENCY (MHz) 2300 2350 2400 2450 2500 2550 14 2600 2650 2700 PLO = 7dBm 2.80 12 2.60 RF Port 10 2.40 PLO = 3dBm 2.00 IP3 (dBm) VSWR 2.20 LO Port 1.80 PLO = 5dBm 8 6 1.60 4 IF Port 1.40 1db Compression Pt. 2 1.20 1.00 5600 5650 5700 5750 5800 5850 5900 5950 6000 0 5600 3100 3150 3200 3250 3300 3350 3400 3450 5650 5700 5750 5800 5850 5900 5950 3500 RF & LO FREQUENCY (MHz) FREQUENCY (MHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300 Silicon Double Balanced HMICTM Mixer, LO=3300 MHz, RF=5800 MHz MA4EX585L-1225T V 2.00 Case Style - SOT-25 SOT-25 MILLIMETERS INCHES Dim A Min. .106 Max. .122 Min. 2.70 Max. 3.10 B .100 .118 2.54 3.00 C - .051 - 1.30 D .063 REF. 1.60 REF. E .032 .043 .80 1.10 F .014 .020 .35 .50 G .003 - .08 - H .000 .006 .00 .15 J .018 REF. .45 REF. Notes: 1. Leads Coplanarity should be 0.003 (0.08) max. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300