MA4EX190H-1225T Silicon Double Balanced HMICTM Mixer 1700 - 2300 MHz Features • • • • • • • • • Low Cost Miniature Plastic Package High IP3 : 28 dbm Typical 6.6 dB Typical Conversion Loss at 1900 MHz 7.5 dB Typical Conversion Loss at 2200 MHz +13 to +17 dBm LO Drive HMIC™ Patented Process Silicon High Barrier Schottky Diodes DC - 500 MHz IF Bandwidth Lead Free ( RoHS Compliant ) Equivalent Available With 260 Deg.C. Reflow Capability Rev. V2 Package Outline (Topview) 3 2 1 Description and Applications M/A-COM’s MA4EX190H-1225T is a monolithic 1700-2300 MHz double balanced a low cost miniature surface mount package. The die uses M/A-COM’s unique silicon/glass process to achieve low loss elements while retaining the advantages barrier silicon Schottky diodes. silicon mixer in SOT-25 HMICTM passive of high This part is offered with Sn/Pb plating, as well as with 100 % matte Sn plating on the RoHS compliant part number. These mixers are well suited for high volume wireless and cellular applications where small size and repeatability are required. Typical applications include frequency conversion, modulation, and demodulation for receivers and transmitters in both portable cellular and base station applications. 4 5 PIN Configuration PIN Function PIN Function 1 RF 4 GND 2 GND 5 IF 3 LO Functional Schematic IF RF LO Absolute Maximum Ratings1 Parameter Maximum Ratings Operating Temperature -40 °C to +85 °C Storage Temperature -65 °C to +150 °C Incident LO Power +20 dBm Incident RF Power +20 dBm Soldering Temperature (Standard Part Number) Solder Temperature (RoHS Compliant Part Number) Ordering Information +235 Deg C. Standard Part Number RoHS Compliant Part Number Package +260 Deg C. MA4EX190H-1225T MA4EX190H1-1225T Tape and Reel 1. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4EX190H-1225T Silicon Double Balanced HMICTM Mixer 1700 - 2300 MHz Rev. V2 Electrical Specifications @ +25 °C Parameter Frequency Range Test Conditions Units Conversion Loss 1900 MHz 1700-2300 MHz LO Drive = +15 dBm RF = -10 dBm, IF = 60 MHz L - R Isolation 1900 MHz 1700-2300 MHz L - I Isolation Typ. Max. dB dB 6.6 6.7 7.0 8.0 LO Drive = +15 dBm RF Level = -10 dBm dB dB 30.0 30.0 1900 MHz 1700-2300 MHz LO Drive = +15 dBm RF Level = -10 dBm dB dB 28.0 28.0 R - I Isolation 1900 MHz 1700-2300 MHz LO Drive = +15 dBm RF Level = -10 dBm dB dB 23.0 20.0 RF VSWR 1900 MHz 1700-2300 MHz LO Drive = +15 dBm RF Level = -10 dBm 1.10:1 1.20:1 IF VSWR DC - 500 MHz LO Drive = +15 dBm RF Level = -10 dBm 1.40:1 Input IP3 1900 MHz 1850-2300 MHz LO Drive = +17 dBm IF = 60 MHz dBm dBm Input 1 dB Compression 1900 MHz 1700-2300 MHz LO Drive = +17 dBm IF = 60 MHz dBm dBm IF 1 dB Bandwidth Min. 25.0 25.0 29.0 28.0 10.5 10.5 MHz 0 500.0 Typical Performance Curves (LO Drive = +15 dBm, RF = -10 dBm, IF = 60 MHz) Conversion Loss Isolation -5 0 -5.5 -5 -6 LOSS (DB) ISOLATION(dB) -10 PLO = 17dBm PLO = 15dBm -6.5 -7 PLO = 13dBm -15 R-I -20 L-I -7.5 -25 -8 -30 L-R -35 -8.5 1650 1720 1790 1860 1930 2000 2070 2140 2210 2280 1650 2350 1750 1850 1950 FREQUENCY (MHz) 2050 2150 2250 2350 FREQUENCY (MHz) Input IP3 & 1 dB Compression Point VSWR 2.60 35 2.40 30 PLO = 17dBm 2.20 25 PLO = 15dBm R Port IP3 (dBm) VSWR 2.00 1.80 1.60 I Port 1.40 20 15 1db Compression 10 1.20 5 1.00 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 50 2 100 150 200 250 300 350 400 450 FREQUENCY (MHz) 500 0 1700 1800 1900 2000 2100 2200 2300 FREQUENCY (MHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4EX190H-1225T Silicon Double Balanced HMICTM Mixer 1700 - 2300 MHz Case Style - SOT-25 Rev. V2 SOT-25 Dimensions Inches Dim Millimeters Min. Max. Min. Max. A .106 .122 2.70 3.10 B .100 .118 2.54 3.00 C — .051 — 1.30 D .063 REF. 1.60 REF. E .032 .043 .80 1.10 F .014 .020 .35 .50 G .003 — .08 — H .000 .006 .00 J .018 REF. .15 .45 REF. 2. Leads Coplanarity should be 0.003 (0.08) max. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.