MAMX-090950-1277LT Silicon Double Balanced HMIC Mixer 850 - 1050 MHz Features Rev. V2 MLP 3mm Package - Circuit Side • • • • • • +21 dBm Typical Input IP3 8.3 dB Typical Conversion Loss +5 to +10 dBm LO Drive Fully Balanced Passive Mixer Low Cost Miniature Plastic MLP Package Lead Free (RoHS* Compliant) with 260°C Reflow Capability • 100% Matte Tin Plating Description M/A-COM’s MAMX-090950-1277LT is a 850 - 1050 MHz silicon monolithic double balanced mixer in a low cost miniature surface mount MLP 3 mm, 16 lead plastic package. The die uses M/A-COM’s unique HMIC silicon/glass process to realize low loss passive elements while retaining the advantages of medium barrier silicon Schottky barrier diodes. PIN Configuration 3 Applications These mixers are well suited for GSM and CDMA Cellular basestation applications where small size and high performance are required. Typical Applications include frequency conversion, modulation, and demodulation in wireless receivers and transmitters. PIN Function PIN Function 1 N/C 9 N/C 2 N/C 10 RF 3 LO 11 N/C 4 N/C 12 N/C 5 N/C 13 N/C 6 N/C 14 IF 7 N/C 15 N/C 8 N/C 16 N/C 3. Center area is ground Ordering Information Model No. Package MAMX-090950-1277LT Tape and Reel Absolute Maximum Ratings 1,2 Parameter Maximum Rating Operating Temperature -65°C to +125°C Storage Temperature -65°C to 150°C Incident LO Power +20 dBm Incident RF Power +20 dBm Soldering Temperature +260°C max. Schematic IF RF LO 1. Exceeding these limits may cause permanent damage. 2. Please refer to application note M538 for surface mounting instructions * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMX-090950-1277LT Silicon Double Balanced HMIC Mixer 850 - 1050 MHz Rev. V2 Electrical Specifications @ 25°C Parameter Frequency Range Test Conditions Units Min. Typ. Max. Conversion Loss 900 MHz 850 - 1050 MHz LO Drive = +7 dBm RF = -10 dBm, IF = 60 MHz dB dB — — 8.2 8.5 8.9 9.5 L - R Isolation 900 MHz 850 - 1050 MHz LO Drive = +7 dBm RF Level = -10 dBm dB dB — — 65 62 — — L - I Isolation 900 MHz 850 - 1050 MHz LO Drive = +7 dBm RF Level = -10 dBm dB dB — — 46 46 — — R - I Isolation 900 MHz 850 - 1050 MHz LO Drive = +7 dBm RF Level = -10 dBm dB dB — — 23 23 — — LO VSWR 900 MHz 850 - 1050 MHz LO Drive = +7 dBm RF Level = -10 dBm Ratio Ratio — — 1.5:1 1.5:1 — — RF VSWR 900 MHz 850 - 1050 MHz LO Drive = +7 dBm RF Level = -10 dBm Ratio Ratio — — 1.3:1 1.5:1 — — IF VSWR DC - 400 MHz LO Drive = +7 dBm RF Level = -10 dBm Ratio Ratio — — 1.5:1 1.5:1 — — Input IP3 900 MHz 850 - 1050 MHz LO Drive = +7 dBm RF = -10 dBm, IF = 60 MHz dBm dBm 17.8 16.9 21.0 20.5 — — Input 1 dB Compression 900 MHz 850 - 1050 MHz LO Drive = +7 dBm IF = 60 MHz dBm dBm — — 4.3 4.3 — — IF 1 dB Bandwidth DC - 400 MHz LO = 900 MHz @ +7 dBm MHz 0 — 400 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMX-090950-1277LT Silicon Double Balanced HMIC Mixer 850 - 1050 MHz Rev. V2 Typical Performance Curves Conversion Loss vs. Frequency LO Drive = +5/+7/+9 dBm, RF = -10 dBm, IF = 60 MHz Input 1 dB & P1dB vs. Frequency LO Drive = +5/+7/+9 dBm, RF = -10 dBm, IF = 60 MHz 25 PLO = 7dBm -7.9 -8.1 20 PLO = 7dBm PLO = 9dBm PLO = 9dBm IP3 (dBm) LOSS (DB) -8.3 -8.5 -8.7 PLO = 5dBm 15 10 -8.9 1db Compression -9.1 5 PLO = 5dBm -9.3 0 850 -9.5 850 875 900 925 950 975 1000 1025 1050 875 900 925 950 975 1000 1025 1050 FREQUENCY (MHz) FREQUENCY (MHz) VSWR vs. Frequency LO Drive = +7 dBm, RF = -10 dBm, IF = 60 MHz Isolation vs. Frequency LO Drive = +7 dBm, RF = -10 dBm 2.20 0 -10 2.00 R Port R-I -20 ISOLATION(dB) 1.80 VSW R I Port L Port 1.60 1.40 -30 L-I -40 -50 -60 1.20 L-R -70 1.00 -80 850 875 900 925 950 975 1000 50 100 150 200 250 300 350 1050 1025 400 850 875 900 925 950 975 1000 1025 1050 FREQUENCY (MHz) FREQUENCY (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMX-090950-1277LT Silicon Double Balanced HMIC Mixer 850 - 1050 MHz Rev. V2 MAMX-090950-1277LT Outline 3mm FQFP - 16 Lead Saw Singulated 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.