Portable Thermal Printer Compact, battery operated printer compatible with Extech meters to print out data Ideal for providing hard copy data anywhere Features: • For use with models: - 380801/380803 Appliance Tester/Power Analyzer - 380900 Dual Channel Datalogging TRMS MultiMeter - 382085 Graphic Power Quality Analyzer Clamp - 382095/382096 3-Phase Power and Harmonics Analyzer - 382410 Graphic Power Analyzer with Flex Probe - 407764 Datalogging Sound level Meter - 407780 Integrating Sound Level Datalogger - 451126 CFM/CMM Vane Anemometer Datalogger - BT100 Battery Capacity Tester • Prints text and graphics • Two selectable fonts • Programmable text header and footer • Battery and AC powered • Fixed interval continuous printing (5, 30, 60, 300 seconds) • RS-232 interface • Complete with software and cable, AC adaptor, eight AA batteries and roll of paper The PR20 Portable Thermal Printer gives you the means to document your pre- and post reading calibrations and the target noise source. Specifications Dots per Line: Fonts: Dot Pitch: Character Size: Characters per Line: Printing Contrast: Printing Width: Printing Speed: Paper Width: Interface: Receiving Buffer: Character set: Graphics: Batteries: AC Power Adaptor: Dimensions: Weight: 8 (vertical) x 166 (horizontal) 5 x 7 and 10 x 15 0.35mm (vertical), 0.28 (horizontal) 1.4 x 2.4mm (5 x 7), 2.8 x 4.6mm (10 x 15) 27 (5 x 7), 16 (10 x 15) Auto and user selectable 46mm 0.8 lines/second 2.24” (57mm) serial RS-232 9K bytes ASCII International Bit Map eight AA batteries 12VDC 3.7x5.3x2.16 (95x135x55mm) 15.5oz (440g) including batteries Ordering Information: PR20 ..............Portable Thermal Printer 757057 ..........Replacement Thermal Paper (5pk) www.extech.com Specifications subject to change without notice. 7/1/08 - R1 Copyright © 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.