MA-COM DS53-0001-TR

DS53-0001
Low Cost Three Way Power Splitter/Combiner
824 – 960 MHz
Rev. V4
Features
•
•
•
•
•
Small Size and Low Profile
Excellent Insertion Loss 0.6 dB Typical
Superior Repeatability
Low Cost
CSM, AMPS, CDPD, ARDIS, RAM Frequency
Coverage
• SOIC-8 Package
Functional Block Diagram1
Description
M/A-COM’s DS53-0001 is an IC-based monolithic
power divider in a low cost SOIC-8 plastic package.
This 3-way power divider is ideally suited for applications where small size, low profile, and low cost without sacrificing Performance, are required. Typical
applications include Base Stations, portables and
PCMCIA cards for cellular applications. Available in
Tape and Reel.
The DS53-0001 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability.
1.
All unused pins must be RF and DC grounded.
Pin Configuration
Pin No.
Ordering Information
Function
Pin No.
Function
1
GND
5
RF OUT
2
RF IN
6
GND
Part Number
Package
3
GND
7
RF OUT
DS53-0001
Bulk Packaging
4
GND
8
RF OUT
DS53-0001-TR
1000 piece reel
DS53-0001SAM
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
DS53-0001
Low Cost Three Way Power Splitter/Combiner
824 – 960 MHz
Rev. V4
Electrical Specifications: TA = 25°C, Z0 = 50Ω
Parameter
Units
Min
Typ
Max
Insertion Loss above 4.78 dB
Isolation
dB
—
0.6
0.7
dB
15
18
—
VSWR
—
—
1.4:1
1.6:1
Amplitude Balance
dB
—
0.6
0.8
Phase Balance
Deg
—
2
4
Absolute Maximum Ratings 2,3
Parameter
Input Power
4
Absolute Maximum
1W CW
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
Recommended PCB Configuration
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. With internal load dissipation of 0.125 W Maximum.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
DS53-0001
Low Cost Three Way Power Splitter/Combiner
824 – 960 MHz
Rev. V4
Typical Performance Curves
Insertion Loss vs. Frequency
Isolation vs. Frequency
VSWR Input vs. Frequency
VSWR Output vs. Frequency
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
DS53-0001
Low Cost Three Way Power Splitter/Combiner
824 – 960 MHz
Rev. V4
SOIC-8†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.