DS52-0008 Low Cost Two-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 Features • • • • • • Small Size and Low Profile Industry Standard SOT-26 SMT Plastic Package Typical Insertion Loss: 0.6 dB Typical Isolation: 15 dB 1 Watt Power Handling SOT-26 Package Description M/A-COM’s DS52-0008 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-26 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/ amplitude tracking and low cost are required. Typical applications include personal communication systems and other communication applications where size and PCB real estate are at a premium. Available in tape and reel. The DS52-0008 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Functional Diagram RF 1 GND GND RF IN RF 2 GND Pin Configuration Pin No. Function Pin No. Function 1 RF1 4 GND 2 GND 5 RF IN 3 RF2 6 GND Ordering Information Part Number Package DS52-0008 Bulk Packaging DS52-0008-TR 1000 piece reel Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0008 Low Cost Two-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 Electrical Specifications: TA = 25°C1 Parameter Units Min Typ Max Insertion Loss Above 3.0 dB dB — 0.6 0.8 Isolation dB 13 15 — VSWR Input RF1, RF2 Outputs — — — — 1.3:1 1.3:1 1.4:1 1.5:1 Amplitude Balance dB — 0.1 0.25 Deg. — 3 5 Phase Balance 1. All specifications apply with a 50-ohm source and load impedance. Absolute Maximum Ratings Parameter Input Power 4 Operating Temperature 2. 3. 4. 2,3 Recommended PCB Configuration Absolute Maximum 1W CW -40°C to +85°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0008 Low Cost Two-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency (Dashed lines show amplitude balance window) VSWR vs. Frequency q VSWR Insertion Loss dB -0.5 -0.75 1.6 1.4 1.2 858 892 926 1 824 960 Isolation vs. Frequency 892 926 960 926 960 Phase Balance vs. Frequency (Relative to RF1) 0 0 Phase, degrees Isolation dB 858 Frequency MHz Frequency MHz -5 -10 -15 -20 824 Input Output 1.8 -0.25 -1 824 y 2 0 -2 -4 -6 -8 -10 824 858 892 926 960 858 892 Frequency MHz Frequency MHz 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0008 Low Cost Two-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 SOT-26† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.