MAPD-008957-CT0012 E-Series Surface Mount Power Divider 1-2700 MHz Rev. V1 Features · · · · Schematic 2 Way 50Ohm Surface Mount 0 Degree Broad Band performance Description MAPD-008957-CT0012 is a RoHS compliant 2 Way 0° Power Divider in a low cost, surface mount package. Component Dimensions Product Image Pin Configuration Pin No. Function 1 Input 2 Not Used (GND) 3 Output Port1 4 Output Port2 5 Not Used (GND) 6 Ground ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-008957-CT0012 E-Series Surface Mount Power Divider 1-2700 MHz Rev. V1 Electrical Specifications: TA = 25°C, Z 0 = 50Ω Ω Parameter Frequency (MHz) Units Min Typ Max Insertion Loss (Above 3dB) 1 - 1800 1800-2700 dB dB — — 0.8 1.3 1.3 2.0 Isolation 1 - 2000 2000-2400 2400-2700 dB dB dB 9 13 10 10 20 11 20 30 — Amplitude Balance 1 - 2500 2500-2700 dB dB — — 0.5 1.0 1.0 1.5 Phase Balance 1 - 2700 deg — 2 8 Input Return Loss 1 - 1200 1200-2400 2400-2700 dB dB dB 9 12 6 10 15 10 — 25 12 Output Return Loss 1 - 1800 1800-2700 dB dB 20 16 25 23 32 32 Absolute Maximum Ratings 1,2 Parameter Absolute Maximum RF Power 250 mW Internal Load Dissipation 50 mA Operating Temperature -40°C to +80°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-008957-CT0012 E-Series Surface Mount Power Divider 1-2700 MHz Rev. V1 Typical Performance Curves dB Insertion Loss Amplitude Unbalance 0 -0.5 -1 -1.5 -2 0.5 0 B -0.5 d -1 -1.5 0 450 900 1350 1800 2250 2700 0 450 900 MHz MHz Phase Unbalance Input Return Loss 0 -5 -10 B -15 d -20 -25 -30 5 Degree 1350 1800 2250 2700 0 -5 -10 0 0 450 900 1350 1800 2250 450 900 2700 1350 1800 2250 2700 MHz MHz Isolation 0 -10 -20 -30 -40 dB dB Output Return Loss 0 450 900 1350 MHz 1800 2250 2700 0 -10 -20 -30 -40 0 450 900 1350 1800 2250 2700 MHz 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-008957-CT0012 E-Series Surface Mount Power Divider 1-2700 MHz Rev. V1 Tape & Reel Information Item Dimension Ao 4.00mm +/-0.1mm Bo 4.00mm +/-0.1mm Ko 2.9mm +/-0.1mm W 12.00mm +/-0.3mm P1 8.00mm +/-0.1mm Ordering Information Part Number Package MAPD-008957-CT0012 Tape and Reel (2000 piece Reel) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.