MA-COM MASWSS0162

MASWSS0162
GaAs SPST Switch
DC - 2.5 GHz
Rev. V3
Functional Schematic
Features
•
•
•
•
•
•
•
•
•
•
•
Very Low Power Consumption: 50 µW
Low Insertion Loss: 1.0 dB
High Isolation: 35 dB up to 2 GHz
Very High Intercept Point: 46 dBm IP3
Nanosecond Switching Speed
Temperature Range: -40°C to +85°C
Lead-Free SOIC-8 Plastic Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of SW-259
8
7
6
5
1
2
3
4
Description
M/A-COM’s MASWSS0162 is a GaAs MMIC SPST
switch in a lead-free SOIC-8 lead surface mount
plastic package. The MASWSS0162 is ideally suited
for use where low power consumption is required.
Typical applications include transmit/receive switching, switch matrices and switched filter banks in systems such as radio and cellular equipment, PCM,
GPS, fiber optic modules, and other battery powered
radio equipment.
Pin Configuration
PIN No.
Description
PIN No.
Description
1
Ground
5
RF Port 2
2
A
6
Ground
3
B
7
Ground
4
Ground
8
RF Port 1
The MASWSS0162 is fabricated using a monolithic
GaAs MMIC using a mature 1 micron process. The
process features full chip passivation for increased
performance and reliability.
Absolute Maximum Ratings 2,4
Ordering Information1
Part Number
Package
MASWSS0162
Bulk Packaging
MASWSS0162TR
1000 piece reel
1. Reference Application Note M513 for reel size information.
Parameter
Absolute Maximum
Input Power 3
0.05 GHz
0.5 – 2.0 GHz
+27 dBm
+34 dBm
Control Voltage
+5 V, -8.5 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. When the RF Input power is applied to a terminated port, the
absolute maximum is +32 dBm.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASWSS0162
GaAs SPST Switch
DC - 2.5 GHz
Rev. V3
Electrical Specifications: TA = +25°C5, VC = -5 V / 0 V, PIN = 0 dBm
Parameter
Test Conditions
Units
Min
Typ5
Max
Insertion Loss 6
DC - 0.5 GHz
0.5 - 1.0 GHz
1.0 - 2.0 GHz
dB
dB
dB
—
—
—
0.8
0.9
1.1
—
1.2
—
Isolation 6
DC - 0.5 GHz
0.5 - 1.0 GHz
1.0 - 2.0 GHz
dB
dB
dB
—
45
—
65
53
40
—
—
—
VSWR On
VSWR Off
DC - 2.0 GHz
DC - 2.0 GHz
Ratio
Ratio
—
—
1.2:1
1.2:1
—
—
1 dB Compression
Input Power
0.05 GHz
0.5 - 2.0 GHz
dBm
dBm
—
—
18
23
—
—
Trise, Tfall
10% to 90% RF, 90% to 10% RF
nS
—
4
Ton, Toff
50% Control to 90% RF, Control to 10% RF
nS
—
8
Transients
In-Band
mV
—
35
2nd Order Intercept
Measured Relative to Input Power, two-tone up to +5 dBm
0.05 GHz
0.5 - 2.0 GHz
dBm
dBm
—
—
55
68
—
—
3rd Order Intercept
Measured Relative to Input Power, two-tone up to +5 dBm
0.05 GHz
0.5 - 2.0 GHz
dBm
dBm
—
—
40
46
—
—
Control Current
—
µA
—
—
25
5. All measurements with 0, -5 V control voltages at 1.0 GHz in a 50 Ω system, unless otherwise specified.
6. Typical values listed are based on average of frequency range noted.
Lead-Free SOIC-8†
† Reference Application Note M538 for lead-free solder reflow recommendations.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASWSS0162
GaAs SPST Switch
DC - 2.5 GHz
Rev. V3
Truth Table 7,8
Electrical Schematic
Control Inputs
Condition of Switch
A
B
RF State
1
0
On
0
1
Off
7. “0” = 0 to -0.2 V @ 20 mA max.
8. “1” = -5 V @ 20 mA Typ to –8 V @ 600 mA max.
Typical Performance Curves
Isolation
Insertion Loss
80
2.0
+85°C
+25°C
-40°C
70
1.5
60
50
1.0
40
30
0.5
20
0.0
0.0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
10
0.0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
VSWR
2.0
1.8
1.6
1.4
1.2
1.0
0.0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 3
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.